|
|
 |
|
Viewing report
|
|
|
|
The World Market for Ultrasonic Flowmeters, 3rd Edition
Flow Research, Inc., Jan 2008
Overview of Ultrasonic Flowmeter Technology
There are two main types of ultrasonic flowmeters: transit time and Doppler. A transit time ultrasonic flowmeters has both a sender and a receiver. It sends two ultrasonic signals across a pipe at an angle: one with the flow, and one against the flow. The meter then measures the “transit time” of each signal. When the ultrasonic signal travels with the flow, it travels faster than when it travels against the flow. The difference between the two transit times is proportional to flowrate.
Doppler flowmeters also send an ultrasonic signal across a pipe. Instead of tracking the time the signal takes to cross to the other side, a Doppler flowmeter relies on having the signal deflected by particles in the flowstream. These particles are traveling at the same speed as the flow. As the signal passes through the stream, its frequency shifts in proportion to the mean velocity of the fluid. A receiver detects the reflected signal and measures its frequency. The meter calculates flow by comparing the generated and detected frequencies. Doppler ultrasonic flowmeters are used with dirty liquids or slurries. They are not used to measure gas flow.
Ultrasonic flowmeters were first introduced for industrial use in 1963 by Tokyo Keiki (which later became Tokimec) in Japan. Tokimec is located in Tokyo, Japan. In 1972, Controlotron (Hauppauge, New York) became the first U.S. manufacturer to market ultrasonic flowmeters in the United States. In the late 1970s and early 1980s, both Panametrics (Waltham, Massachusetts) and Ultraflux (Poissy Cedex, France) experimented with the use of ultrasonic flowmeters to measure gas flow. Initially, ultrasonic flowmeters were not well understood, and were sometimes misapplied. Many technological improvements have been made in the past 10 years, and the limitations of ultrasonic meters are better understood. Advances in transit time technology have broadened the types of liquids that transit time flowmeters can be used on. Many transit time meters today can handle liquids containing some impurities.
Many Changes Occurred from 2003 to 2008
Many changes have occurred in the ultrasonic flowmeter market since the 2nd edition of this study was published in March 2003.
GE Sensing. GE Sensing has continued to improve its clamp-on ultrasonic flowmeter for gas applications that was first introduced in September 2001. In March 2004, GE Infrastructure released a major update to this meter. The company also released the Sentinel, a multipath ultrasonic meter designed for custody transfer of natural gas, in October 2004
At the ISA show in October 2007, GE Sensing introduced its PanaFlowTM ISX, the newest portion of GE’s ultrasonic line-up. These devices are designed for applications in the oil & gas, power generation, and water industries, and in a wide variety of liquids including chemicals, solvents, weak acids, water, petroleum products, lubricating oils, and hydrocarbons. The firm claims that the compact design makes it easier, and thus less costly, to install in hazardous locations. Bidirectional flows can be measured in pipe sizes ranging from 4-24 inches, with a stated accuracy of ±0.5%. Power is via 2-wire loop.
Controlotron. During this period, Controlotron maintained its focus on the clamp-on transit time ultrasonic flowmeter market. The most significant event of this period for Controlotron was its sale to Siemens in May 2006. The company has been renamed Siemens Energy & Automation Process Instrumentation Business Unit.
Instromet. Instromet expanded its Q-Sonic 3 and Q-Sonic 4 models, both of which are used for custody transfer of natural gas. These improvements include relocating the transducers to the upper side of the meter, and introducing a Coded Multiple Burst (CMD) signal that improves meter performance in hostile situations.
KROHNE. While KROHNE has not traditionally expanded its product line through acquisition, the company was very active in introducing new products during this period. In August 2003, KROHNE brought out the Altosonic III, a 3-path meter designed for liquid applications. The Altonsonic III is a cousin of the Altosonic V, which is designed for custody transfer of liquids. Early in 2004, KROHNE formed an alliance with SICK, allowing it to bring out the Altosonic IV, a meter designed for gas applications. The Altosonic IV is a version of the SICK MAIHAK ultrasonic flowmeter. KROHNE was also very active in the Coriolis and magnetic flowmeter markets during this time.
Emerson Process Management. Emerson Process’ ultrasonic flowmeters are part of the Daniel division. Emerson Process is a leading supplier of ultrasonic flowmeters for custody transfer of natural gas. In November 2004, Emerson Process announced a series of upgrades to its line of SeniorSonic and JuniorSonic ultrasonic flowmeters for gas flow measurement. The upgrades include the capability of acquiring live gas composition data from a gas chromatograph and the real-time calculation of speed of sound. In June 2006, Emerson Process launched the Model 3804, a liquid ultrasonic meter designed for fiscal metering applications.
Siemens. Siemens first introduced its ultrasonic flowmeter, the FUS, in 1997. In September 2003, it acquired the flow division of Danfoss, including Danfoss’ series of SONOFLO ultrasonic flowmeters. Then in May 2006, Siemens completed the acquisition of Controlotron, a leading supplier of ultrasonic clamp-on flowmeters. Siemens is now selling all these flowmeters, including the Controlotron meters, as part of its F US Series of ultrasonic flowmeters.
Other companies. The acquisition of Caldon by Cameron Measurement Systems is very significant. Cameron is one of the world’s leading suppliers of valves, and a major supplier to the oil & gas industry. It is also significant that Sierra Instruments and George Fischer have entered the ultrasonic flowmeter market. Because the ultrasonic flowmeter market is growing so rapidly, more new suppliers can be expected to enter this market.
Recent Developments - March 2009
A number of important developments occurred in the ultrasonic flowmeter market in 2008:
-In September 2008, Blue-White Industries began shipping its new clamp-on Sonic-Pro® ultrasonic flowmeters. Previously, the only type of flowmeter manufactured by Blue-White was variable area. The Sonic-Pro is a hybrid flowmeter that is selectable between transit time and Doppler technologies.
-In August 2008, Siemens announced the release of a new SITRANS F US standalone thickness gauge. This gauge measures the wall thickness of any metallic of non-metallic pipe, which is a crucial measurement for clamp-on ultrasonic flowmeters. The output form the F US thickness gauge is entered into a flow computer, and is used in calculating flowrate.
-In April 2008 at Interkama in Germany, KROHNE released a new series of ultrasonic gas flowmeters for non-custody transfer applications. The OPTISONIC V6 was developed for applications in the production of natural gas and for gas suppliers' city gates and transfer stations. It can also be used in offshore platforms. The OPTISONIC Vs is a six-path flowmeter.
-IDEX Corp. purchased ADS LLC in January 2008, including its ultrasonic division. The Accusonic line includes multipath ultrasonic flowmeters for hydroelectric penstocks, and large pipe and channel systems for cooling water and condenser water lines.
This study addresses the key issues in the ultrasonic flowmeter market, including:
-Growth in the ultrasonic transit time flowmeter market
-Shipments of clamp-on, spoolpiece, and insertion meters
-Comparison of portable vs. fixed ultrasonic flowmeters
-The expanding use of ultrasonic flowmeters for custody transfer of natural gas
-The emerging market for ultrasonic flowmeters in steam flow measurement
-The market for Doppler and hybrid ultrasonic flowmeters
-Mergers and acquisitions in the ultrasonic flowmeter market
This study includes market size in dollars and units for ultrasonic flowmeters worldwide and by geographic region. It reveals market shares by geographic region. It says what industries ultrasonic flowmeters are sold into. The study also includes other important segmentation, including:
-Transit Time/Doppler/Hydrid
-Multipath/Single Path
-Clamp-on/Spoolpiece/Insertion
-Portable/Fixed
-Gas/Liquid/Steam
-Line sizes for Clamp-On, Insertion, and Spoolpiece Ultrasonic Flowmeters
-Smart/Conventional
-Industry worldwide and by region
-Type of Communication Protocol (Foundation Fieldbus, Profibus, HART, etc.)
-Sales Channel (Direct/Independent Reps/Distributors/E-Business)
-Customer Type (End-users/OEMs/Systems Integrators/Engineers & Consultants)
What’s in this for my company?
-See the emerging applications and where the growth is
-Understand world and regional markets
-Get to know your real competition
-Learn what other suppliers manufacture, where, and for whom
-The best information creates the best decisions
Customers who bought this item also bought
The World Market for Coriolis Flowmeters, 3rd Edition
Volume X: The World Market for Flowmeters, 2nd Edition
The World Market for Vortex Flowmeters
World Flowmeters Market in Process Industries
The World Market for Steam Flow Measurement
The 2009-2014 World Outlook for Ultrasonic Equipment Excluding for Medical and Dental Applications
The World Market for Machine Tools Operated by Ultrasonic Processes: A 2009 Global Trade Perspective
The World Market for Gas Flow Measurement
The 2009-2014 World Outlook for Soldering Equipment Excluding Hand and Ultrasonic Equipment
The 2009 Report on Ultrasonic Equipment Excluding for Medical and Dental Applications: World Market Segmentation by City
The 2009 World Market Forecasts for Imported Machine Tools Operated by Ultrasonic Processes
The 2010 Report on Ultrasonic Flowmeters: World Market Segmentation by City
|
|
|
|
