|
|
 |
|
Viewing report
|
|
|
|
Path Routing in Mesh Optical Networks
John Wiley and Sons Ltd, Oct 2007, Pages: 304
Most of the core backbone networks evolve to mesh topologies utilizing intelligent network elements for provisioning and restoration of services. Most, if not all, transport networks might move away from ring architectures to mesh architectures over the next 5 years. This book combines both theoretical aspects as well as practical aspects of routing and dimensioning for mesh optical networks. All authors were or are working as technical leaders for equipment vendors who have implemented such capabilities in their products, and whose products have been deployed in service provider networks.The book will cover most aspects of routing path-protected connections in restorable mesh optical networks. While the technology the book describes is that of optical networks, most of the concepts and algorithms apply to ATM (Asynchronous Transfer Mode) and IP/MPLS (Internet Protocol/Multi Protocol Label Switching) networks as well.
Transport networks evolved from DCS (Digital Cross-connect Systems)-based mesh architectures, to SONET/SDH (Synchronous Optical Networking/Synchronous Digital Hierarchy) ring architectures in the 1990’s. In the past few years, technological advancements in optical transport switches have allowed service providers to support the same fast recovery in mesh networks previously available in ring networks while achieving better capacity efficiency and resulting in lower capital cost.
Optical transport networks today not only provide trunking capacity to higher-layer networks, such as inter-router connectivity in an IP-centric infrastructure, but also support efficient routing and fast failure recovery of high-bandwidth services. This is possible due to the emergence of optical network elements that have the intelligence required to efficiently control the network. Optical mesh networks will enable a variety of dynamic services such as bandwidth-on-demand, Just-In-Time bandwidth, bandwidth scheduling, bandwidth brokering, and optical virtual private networks that open up new opportunities for service providers and their customers alike.
Path Routing in Mesh Optical Networks combines both theoretical as well as practical aspects of routing and dimensioning for mesh optical networks. All authors have worked as technical leaders for the equipment vendor Tellium who implemented such capabilities in its product, and whose product was deployed in service provider networks.
Path Routing in Mesh Optical Networks
- Presents an in-depth treatment of a specific class of optical networks, i.e. path-oriented mesh optical networks.
- Focuses on routing and recovery, dimensioning, performance analysis and availability in mesh optical networks.
- Explains and analyses routing specifically associated with Dedicated Backup Path Protection (DBPP) and Shared Backup Path Protection (SBPP) recovery architectures.
As most of the core backbone networks evolve to mesh topologies utilizing intelligent network elements for provisioning and recovery of services, Path Routing in Mesh Optical Networks will be an invaluable tool for both researchers and engineers in the industry who are responsible for designing, developing, deploying and maintaining mesh optical networks. It will also be a useful reference book for graduate students and university professors who are interested in optical networks or telecommunications networking.
About the authors:
Dr. Jean-Francois Labourdette is manager of system engineering at Tellium. He is responsible for all network element and network management system engineering activities. Before that he was manager of network routing and design, where he was responsible for Tellium's routing architecture and algorithms, network dimensioning, and design studies.
Dr. Eric Bouillet is principal engineer at Tellium. He works on the design of optical networks and optimization of light-path provisioning and fault restoration algorithms. Before joining Tellium, Eric was a member of the technical staff in the Mathematical Sciences Research Center in Bell Labs/Lucent Technologies, working in the areas of routing in ATM and optical networks.
Georgios Ellinas is an Associate Professor of Electrical Engineering at City College of the City University of New York. Before joining City College, George was a senior network architect at Tellium Inc. In this role, he worked on light-path provisioning and fault restoration algorithms in optical mesh networks.
Ramu Ramamurthy is lead engineer in the Optical Switch Division at Ciena (Ciena's Optical Switch has been deployed in the worlds biggest optical mesh networks).
Ciena Ramu works on the design and development of Routing and Restoration algorithms and protocols for optical mesh networks. Before that he worked for Tellium, where Ramu was part of a team that implemented Tellium's routing and restoration algorithms for optical mesh networks. His work at Tellium has resulted in several patent applications, and he coauthored several widely referenced publications in leading journals and conferences.
Customers who bought this item also bought
Wireless Mesh Networks
Network Infrastructure and Architecture: Designing High-Availability Networks
Public Network Switching, Routing and Cross Connects: Next Generation Optical Products and Services
Alcatel-Lucent Scalable IP Networks Self-Study Guide: Preparing for the Network Routing Specialist I (NRS 1) Certification Exam (4A0-100)
2008 Technology - Internet - Volume 5 - Routing & Addressing Crisis (1st Edition)
The Path to 100 Gbps Networks
Gmpls and the Optical Control Plane: An Analysis of Profitability and Performance in Optical Networks
Advanced Technologies for Optical Networks
Optical WDM Networks: Concepts and Design Principles
Carrier Core Switch/Routing: Product Landscape Report
Managing the Optical Network
Transmission, Routing and Switching in the Cable Network
|
|
|
|
