Printer Friendly

Printed from http://www.researchandmarkets.com/reports/1040415

The 2009 Import and Export Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High in Oceana

Description:
On the demand side, exporters and strategic planners approaching the market in Oceana face a number of questions. Which countries are supplying hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high to Oceana? What is the dollar value of these imports? How much do the imports of hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high vary from one country to another in Oceana? Do exporters serving the market in Oceana have similar market shares across the importing countries? On the supply side, Oceana also sells to the international market of hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high. Which countries in Oceana supply the most exports of hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? This report was created for strategic planners, international marketing executives and import/export managers who are concerned with the market for hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high in Oceana. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high for those countries serving Oceana via exports or supplying from Oceana via imports. We do so for the current year based on a variety of key historical indicators and econometric models. In what follows, Chapter 2 begins by summarizing where Oceana fits into the world market for imported and exported hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high. The total level of imports and exports on a worldwide basis, and those for Oceana in particular, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries in Oceana are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets within Oceana. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports for Oceana, Chapter 3 details the exports of hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high, but for each individual country in Oceana. Chapter 4 does the same, but for imports of hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high for all countries in Oceana. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high to and from Oceana to and from all other countries in the world. Of the 150 countries considered, if a country is not reported here it is therefore estimated to have only a negligible level of trade in hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high (i.e. their market shares are close or equal to zero percent). "Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defined "hot-rolled, hot-drawn, or extruded iron and non-alloy steel with u, i, h, l and t sections of at least 80 mm high" is 67682 . For more information on this definition, please refer to the following web site: http://unstats.un.org/unsd/cr/registry/regcs.asp?Cl=14&Lg=1&Co=676 .
 
Contents:
1 METHODOLOGY 7 1.1 Our Approach 7 2 OCEANA’S SHARE OF THE WORLD MARKET 20 2.1 Exports from Oceana as Share of the World Export Market 20 2.2 Imports in Oceana as Share of the World Import Market 22 3 EXPORTS FROM OCEANA 26 3.1 Executive Summary 26 3.2 Australia 28 3.3 New Zealand 28 4 IMPORTS INTO OCEANA 29 4.1 Executive Summary 29 4.2 Australia 31 4.3 Fiji 31 4.4 New Caledonia 32 4.5 New Zealand 32 5 DISCLAIMERS, WARRANTEES, AND USER AGREEMENT PROVISIONS 33 5.1 Disclaimers & Safe Harbor 33 5.2 ICON Group Ltd. User Agreement Provisions 34
 
Ordering:
Order Online - visit http://www.researchandmarkets.com/reports/1040415

Order by Fax - using the order form below

Order By Post - print the order form below and send to

Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.

 
Page 1 of 2
Printed Nov 24, 2014
6:59:23 AM

Fax order form

To place a fax order simply print this form, fill in and fax the completed form to the number below. If you have any questions please email help@researchandmarkets.net

Order information

Please verify that the product information is correct and select the format you require.

Product name

The 2009 Import and Export Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High in Oceana

Web Address

http://www.researchandmarkets.com/reports/1040415

Office Code

SCOI7T

 

Report Formats

Please enter the quantity of the report format you require.

Format Quantity Price
Electronic (PDF) - Single User USD 325

Contact information

Please enter all the information below in block capitals.

Title:
Mr Mrs Dr Miss Ms Prof
First Name:
Last Name:
Email Address:
Job Title:
Organisation:
Address:
City:
Postal / Zip Code:
Country:
Phone Number:
Fax Number:

Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)

Page 2 of 2
Printed Nov 24, 2014
6:59:23 AM

Payment information

Please indicate the payment method you would like to use by selecting the appropriate box.

Pay by Credit Card:

American Express

Diners Club

Master Card

Visa

Cardholder's Name:
Cardholder's Signature:
Expiry Date:
/
Card Number:
CVV Security Code:
Issue date:
/ (Diners Club only)
 
Pay by Check:

Please post the check, accompanied by this form, to:

Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.

 
Pay by Wire Transfer:

Please transfer funds to:

Account Number:
83313083
Sort Code:
98-53-30
Swift Code:
ULSBIE2D
IBAN Number:
IE78ULSB98533083313083
Bank Address:
Ulster Bank,
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
 

If you have a Marketing Code please enter it below:

Marketing Code:

Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at http://www.researchandmarkets.com/info/terms.asp

Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)