Mrs
Dr
Miss
Ms
Prof
Printer Friendly
Printed from http://www.researchandmarkets.com/reports/1225275
China Mould & Die Industry Report, 2009-2010
Description:
Since 2000, China’s mould & die industry has grown by 15% annually on average, with its total output value ranking in the world’s third place. The 2009 economic meltdown exerted a negative influence on China’s mould industry: the annual output was no more than 9.7 million sets with a year-on-year decrease of 24.8%, while the export of mould contributed $1.843 billion, down 4.11% year on year.
The report sheds light on the supply & demand, export & import in China’s mould industry, and probes into the product structure, market demand structure, regional distribution, trade structure and competition pattern in this regard.
In terms of product structure, mid-and-low-grade products dominate China’s mould market and face the problem of overcapacity while large high precision products are fewer. Plastic moulds and stamping moulds are major products in the domestic market. In terms of market share, the plastic mould holds 34% in China while it is 40% or more in developed countries. Thus it has yet to be increased in this regard.
In terms of demand structure, moulds have been widely applied in many industries such as auto, home appliance, instrument, petrochemical, and light industrial goods. In particular, the auto industry has the greatest demand for moulds, followed by the home appliance industry. With the application of computer and network technologies, the mould demand in the IT industry is expected to boom.
In terms of regional distribution, China has formed a regional mould pattern that the development of southeast costal area is faster than that of mid-west areas, while the development of South China is prior to North China. Moreover, the Pearl River Delta and the Yangtze River Delta are the most concentrated areas for mould manufacturing, accounting for more than two thirds of China’s total.
In terms of the development of provinces and municipalities, Guangdong boasts China’s largest base for mould production and export. About 40% moulds of the country are from Guangdong. Mould orders of Guangdong shrunk in 2009 due to the financial crisis, while the mould output decreased by 17% to 1.655 million sets. Zhejiang province takes a lion’s share in manufacturing plastic moulds; Shanghai concentrates on auto moulds and IT moulds; Hebei province contributes one tenth of China’s auto moulds, with Botou as its core production base.
In terms of trade structure, trade deficit dropped progressively in China’s mould industry. With the increasingly balanced import-export structure, the proportion turned into 1.1:1 in 2009 from 2.8:1 in 2005. And the mould export market has expanded from Hong Kong, the United States and Japan to Brazil, South Korea and Vietnam.
In terms of business pattern, China’s mould industry has always been monopolized by foreign enterprises, private enterprises and state-owned companies. Recent years have seen more and more foreign companies pouring into China, private enterprises growing up and state-owned companies gradually quitting.
The report sheds light on the supply & demand, export & import in China’s mould industry, and probes into the product structure, market demand structure, regional distribution, trade structure and competition pattern in this regard.
In terms of product structure, mid-and-low-grade products dominate China’s mould market and face the problem of overcapacity while large high precision products are fewer. Plastic moulds and stamping moulds are major products in the domestic market. In terms of market share, the plastic mould holds 34% in China while it is 40% or more in developed countries. Thus it has yet to be increased in this regard.
In terms of demand structure, moulds have been widely applied in many industries such as auto, home appliance, instrument, petrochemical, and light industrial goods. In particular, the auto industry has the greatest demand for moulds, followed by the home appliance industry. With the application of computer and network technologies, the mould demand in the IT industry is expected to boom.
In terms of regional distribution, China has formed a regional mould pattern that the development of southeast costal area is faster than that of mid-west areas, while the development of South China is prior to North China. Moreover, the Pearl River Delta and the Yangtze River Delta are the most concentrated areas for mould manufacturing, accounting for more than two thirds of China’s total.
In terms of the development of provinces and municipalities, Guangdong boasts China’s largest base for mould production and export. About 40% moulds of the country are from Guangdong. Mould orders of Guangdong shrunk in 2009 due to the financial crisis, while the mould output decreased by 17% to 1.655 million sets. Zhejiang province takes a lion’s share in manufacturing plastic moulds; Shanghai concentrates on auto moulds and IT moulds; Hebei province contributes one tenth of China’s auto moulds, with Botou as its core production base.
In terms of trade structure, trade deficit dropped progressively in China’s mould industry. With the increasingly balanced import-export structure, the proportion turned into 1.1:1 in 2009 from 2.8:1 in 2005. And the mould export market has expanded from Hong Kong, the United States and Japan to Brazil, South Korea and Vietnam.
In terms of business pattern, China’s mould industry has always been monopolized by foreign enterprises, private enterprises and state-owned companies. Recent years have seen more and more foreign companies pouring into China, private enterprises growing up and state-owned companies gradually quitting.
Contents:
1. Overview
1.1 Products & Classification
1.2 History
1.3 Development
2. Operation
2.1 Operating Environment
2.1.1 Policy
2.1.2 Trade
2.1.3 Technology
2.2 Supply
2.2.1 Output
2.2.2 Product Structure
2.2.3 Mould Steel
2.3 Demand
2.4 Import & Export
2.5 Operation of Large-Scale Enterprises (With Annual Revenue Exceeding RMB 5 Million)
2.5.1 Enterprises & Employees
2.5.2 Revenue
2.5.3 Profitability
2.5.4 Cost
2.6 Technical Progress
3. Major Market Segments
3.1 Major Product Market
3.1.1 Plastic Mould
3.1.2 Stamping Mould
3.2 Major Application Market
3.2.1 Auto Mould
3.2 2 IT Mould
4. Competition
4.1 Competition Pattern by Region
4.2 Competition Among Provinces and Municipalities
4.2.1 Guangdong
4.2.2 Zhejiang
4.2.3 Jiangsu
4.2.4 Hebei
4.2.5 Shanghai
4.3 Competition Among Enterprises
4.3.1 Foreign Enterprises
4.3.2 Private Enterprises
5.Leading Enterprises
5.1 Sichuan Chengfei Integration Technology
5.1.1 Profile
5.1.2 Operation
5.2 Guangdong Greatoo Molds
5.2.1 Profile
5.2.2 Operation
5.3 Tongling Trinity Technology
5.3.1 Profile
5.3.2 Operation
5.4 Heyuan Lung Kee Metal Products
5.4.1 Profile
5.4.2 Operation
5.5 Hi-p (Tianjin) Electronics
5.6 Perlos (Guangzhou) Engineering Plastics
5.7 Balda-Everskill Solutions (Suzhou)
5.8 Handa Precision Electronic Technology (Kunshan)
5.9 Shinheung Precision Electronics (Suzhou)
5.10 Fu Yu Moulding &Tooling (Dongguan)
5.11Zhongshan Zhihe Electrical Equipment
5.12 Ichia Electronics (Zhongshan)
5.13 Punch Industry (Dalian)
5.14 Guangdong Sheng Du Mould
5.15 Precision Mould (kunshan)
6.Trends and Prospect
6.1 Industry Development
6.2 Market Development
6.3 Technology Development
1.1 Products & Classification
1.2 History
1.3 Development
2. Operation
2.1 Operating Environment
2.1.1 Policy
2.1.2 Trade
2.1.3 Technology
2.2 Supply
2.2.1 Output
2.2.2 Product Structure
2.2.3 Mould Steel
2.3 Demand
2.4 Import & Export
2.5 Operation of Large-Scale Enterprises (With Annual Revenue Exceeding RMB 5 Million)
2.5.1 Enterprises & Employees
2.5.2 Revenue
2.5.3 Profitability
2.5.4 Cost
2.6 Technical Progress
3. Major Market Segments
3.1 Major Product Market
3.1.1 Plastic Mould
3.1.2 Stamping Mould
3.2 Major Application Market
3.2.1 Auto Mould
3.2 2 IT Mould
4. Competition
4.1 Competition Pattern by Region
4.2 Competition Among Provinces and Municipalities
4.2.1 Guangdong
4.2.2 Zhejiang
4.2.3 Jiangsu
4.2.4 Hebei
4.2.5 Shanghai
4.3 Competition Among Enterprises
4.3.1 Foreign Enterprises
4.3.2 Private Enterprises
5.Leading Enterprises
5.1 Sichuan Chengfei Integration Technology
5.1.1 Profile
5.1.2 Operation
5.2 Guangdong Greatoo Molds
5.2.1 Profile
5.2.2 Operation
5.3 Tongling Trinity Technology
5.3.1 Profile
5.3.2 Operation
5.4 Heyuan Lung Kee Metal Products
5.4.1 Profile
5.4.2 Operation
5.5 Hi-p (Tianjin) Electronics
5.6 Perlos (Guangzhou) Engineering Plastics
5.7 Balda-Everskill Solutions (Suzhou)
5.8 Handa Precision Electronic Technology (Kunshan)
5.9 Shinheung Precision Electronics (Suzhou)
5.10 Fu Yu Moulding &Tooling (Dongguan)
5.11Zhongshan Zhihe Electrical Equipment
5.12 Ichia Electronics (Zhongshan)
5.13 Punch Industry (Dalian)
5.14 Guangdong Sheng Du Mould
5.15 Precision Mould (kunshan)
6.Trends and Prospect
6.1 Industry Development
6.2 Market Development
6.3 Technology Development
Companies Mentioned
- Sichuan Chengfei Integration Technology
- Guangdong Greatoo Molds
- Tongling Trinity Technology
- Heyuan Lung Kee Metal Products
- Hi-p (Tianjin) Electronics
- Perlos (Guangzhou) Engineering Plastics
- Balda-Everskill Solutions (Suzhou)
- Handa Precision Electronic Technology (Kunshan)
- Shinheung Precision Electronics (Suzhou)
- Fu Yu Moulding &Tooling (Dongguan)
- Zhongshan Zhihe Electrical Equipment
- Ichia Electronics (Zhongshan)
- Punch Industry (Dalian)
- Guangdong Sheng Du Mould
- Precision Mould (kunshan)
- Guangdong Greatoo Molds
- Tongling Trinity Technology
- Heyuan Lung Kee Metal Products
- Hi-p (Tianjin) Electronics
- Perlos (Guangzhou) Engineering Plastics
- Balda-Everskill Solutions (Suzhou)
- Handa Precision Electronic Technology (Kunshan)
- Shinheung Precision Electronics (Suzhou)
- Fu Yu Moulding &Tooling (Dongguan)
- Zhongshan Zhihe Electrical Equipment
- Ichia Electronics (Zhongshan)
- Punch Industry (Dalian)
- Guangdong Sheng Du Mould
- Precision Mould (kunshan)
Ordering:
Order Online - visit http://www.researchandmarkets.com/reports/1582661
Order by Fax - using the order form below
Order By Post - print the order form below and send to
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Page 1 of 2
Printed Friday, May 24, 2013
4:31:24 PM
4:31:24 PM
Fax order form
To place a fax order simply print this form, fill in and fax the completed form to the number below. If you have any questions please email help@researchandmarkets.net
Order information
Please verify that the product information is correct and select the format you require.
Product name
China Mould & Die Industry Report, 2009-2010
Web Address
http://www.researchandmarkets.com/reports/1225275
Office Code
OC8DIQSNLVVXQR
Report Formats
Please enter the quantity of the report format you require.
| Format | Quantity | Price | Hard Copy |
|
EURO€ 999.00 + EUR€ 50.00 Shipping/Handling * |
|---|---|---|
| Electronic (PDF) - Single User |
|
EURO€ 1,076.00 |
| Electronic (PDF) - Enterprisewide |
|
EURO€ 1,614.00 |
* Shipping/Handling is only charged once per order.
Contact information
Please enter all the information below in block capitals.
Title:
Mr
Mrs
Dr
Miss
Ms
Prof
Mrs
Dr
Miss
Ms
Prof
First Name:
Last Name:
Email Address:
Job Title:
Organisation:
Address:
City:
Postal / Zip Code:
Country:
Phone Number:
Fax Number:
Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)
Page 2 of 2
Printed Friday, May 24, 2013
4:31:24 PM
4:31:24 PM
Payment information
Please indicate the payment method you would like to use by selecting the appropriate box.
Pay by Credit Card:
American Express
Diners Club
Master Card
Visa
Cardholder's Name:
Cardholder's Signature:
Expiry Date:
/
Card Number:
CVV Security Code:
Issue date:
/ (Diners Club only)
Pay by Check:
Please post the check, accompanied by this form, to:
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Pay by Wire Transfer:
Please transfer funds to:
Account Number:
83313083
Sort Code:
98-53-30
Swift Code:
ULSBIE2D
IBAN Number:
IE78ULSB98533083313083
Bank Address:
Ulster Bank,
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
If you have a Marketing Code please enter it below:
Marketing Code:
Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at http://www.researchandmarkets.com/info/terms.asp