+353-1-416-8900REST OF WORLD
1-800-526-8630U.S. (TOLL FREE)
Eco-Materials Processing and Design XI - Product Image

Eco-Materials Processing and Design XI

  • ID: 1382390
  • Book
  • November 2010
  • 530 Pages
  • Trans Tech Publications Inc
1 of 4
Series: Materials Science Forum Vol. 658

Selected, peer reviewed papers from 11th International Symposium on Eco-Materials Processing and Design, Osaka, Japan, January 9 - 12, 2010

This special collection presents the fruits of a forum where researchers were able to present the most advanced and novel scientific results and technological developments in the field of eco-materials processing and design. The aim was to overview the current status and to foresee future likely trends in the field of eco-materials processing and design of energy- and environment-related materials. Many fruitful and exciting research achievements are presented here; not only in conventional areas, but also in sustainable energy sources such as solar cells and fuel cells, photochemistry, porous materials, biomass, and bio-inspired technologies for developing microstructures offering superior surface and bulk properties. Altogether, this work presents a unique overview of the topic.
Note: Product cover images may vary from those shown
2 of 4

A. Materials for Environment Preservation, Energy Conservation and New Energy

Preparation of Atomic Oxygen Oxidant by Electrolysis with Ultrasonic
L.B. Li, J.Q. Xue, T. Hong, M. Wang and J. Yang
Adsorption of Hazardous Heavy Metals Using Reactive Inorganic Agents
in Synthetic Wastewater
J.O. Kim and J.W. Lee
Synthesis of Spherical Carbon Nanoparticles and their EDLC Properties
G.B. Zheng, H. Sano and Y. Uchiyama
In-Flight Behaviors and Properties of Plasma-Sprayed Tungsten Coatings
Y.R. Niu, D.Y. Hu, H. Ji and X.B. Zheng
Thermoelectric and Transport Properties of In-Filled CoSb3 Skutterudites
J.Y. Jung, K.H. Park, S.C. Ur and I.H. Kim
Synthesis and Electronic Transport Properties of Sn-Doped CoSb
K.H. Park, J.Y. Jung, J.I. Lee, K.W. Jang, W.G. Kim and I.H. Kim
Strength and Densification of Ni/Al2O3 Membrane Compacted with Uniaxial
Pressing and CIP for Hydrogen Separation: Influence of Pressing Process
S. Vichaphund and D. Atong
Effect of Complexing Agent on Morphology and Crystal Structure of
La1-xCexCoO3 (x=0, 0.2, and 0.4) Perovskite-Type Mixed Oxides Catalyst
Prepared by Sol-Gel Method
K. Soongprasit, D. Aht-Ong, V. Sricharoenchaikul and D. Atong
Synthesis and Thermoelectric Properties of Half-Heusler Zr-Ni-Sn Alloy Processed
by Mechanically Alloying and Hot Pressing
I.H. Kim, J.C. Kwon, Y.G. Lee, M.S. Yoon, S.L. Ryu, W.G. Kim and S.C. Ur
Preferential Oxidation of CO over Pt Catalysts Supported on Mesoporous
Aluminosilicates in the Presence of H
R. Nakanishi, K. Inukai, M. Maeda, M. Suzuki and Y. Tai
Synthesis and Characterization of Poly(ether ketone) Containing Side Sulfonic Acid
Group for Proton Exchange Membrane Fuel Cell
D.W. Seo, Y.D. Lim, S.H. Lee, T.W. Hong, S.C. Ur, I.H. Kim and W.G. Kim
Adsorption of Ag+ from Aqueous Solutions by Rice Husk
X.Q. Luo, X.Y. Lin, X.G. Luo, A.K. Luo and X. Liang
Synthesis and Characterization of Dumbbell Shaped Calcium Carbonate
Induced by Lignin
W.K. Zhu, X.G. Luo, A.K. Luo and X. Liang
Fixed Bed Column Filled with Rice Husk for the Removal of Cu (II)
from Aqueous Solution
Z.F. Deng, X.G. Luo and X.Y. Lin
Study on the Energy Conversion from the Dynamic Load of Vehicles on the Road
Using Piezoelectric Materials
J.Y. Lee, M.K. Lee, J.G. Oh and K.S. Kim
Effect of Matrix on Phase Formation of Nanometer TiO2 Film
Z.Y. Deng, L.L. Zhu, W.Z. Gai and J.M.F. Ferreira
AFM Studies on the Effect of Crystalline Interphase on Adhesion of Polyurethane
Thin Film to Al Substrate
J.S. Kim, O.H. Lee and Y.S. Lim
Lead Based Multi-Alloy Applied to Anode of Zinc Electrowinning
J. Zhu, X. Li, M.B. Liu and Y. Zhai
Effect of Silicon Carbide Susceptor and Nickel Catalyst Content on Microwave
Enhanced Thermal Conversion of Glycerol Waste
Y. Hawangchu, D. Atong and V. Sricharoenchaikul
Synthesis of Nickel-Coated FeS2 Particles as Active Material for Li/FeS2 Cell
by Mechanical Alloying
X.J. Liu, S.D. Kang, Z.Z. Xu and I.S. Ahn
Optical and Electrical Properties of Large Area SnO2: F Thin Films
by Spray Pyrolysis
G.Y. Zhao, Y. Ren, Y. Gao and J. Shen
Preparation of Textured PZT/LaNiO3 Films on LaAlO3 Substrates
by Sol-Gel Process
Q.L. Liu, G.Y. Zhao, K.L. Mao and Y.Q. Chen

B. Materials Processing Technologies for Reduction of Environmental Impact

Synthesis of Ti2AlC/Al2O3 Nanocomposites by High Energy Milling
and Heat Treatment
J.F. Zhu, G.Q. Qi, H.B. Yang and F. Wang
Study on Preparation of Silica Aerogels/Polystyrene Microspheres with
Core-Shell Structure
G.Q. Geng, X.J. Liu and G.X. Bian
Non-Emulsifiers Multi-Liquid-Crystallized-Phase Opalescence Glaze
F. Wang, Q. Li, H.J. Luo and J.F. Zhu
Relation between Phosphorus Amounts Absorbed by Volcanic Ash Fall Deposits
and its Calcinating Temperature
E. Watanabe, K. Nishizawa and M. Maeda
Synthesis of V-ZrSiO4 Blue Ceramic Pigments
K.R. Pyon and B.H. Lee
Synthesis of Forsterite Pigment for Underglaze Colors
H.S. Lee and B.H. Lee
Optimization of Manufacturing Conditions for Activated Carbon from Coffee
(Coffea Arabica L.) Bean Waste by Chemical Activation
C. Pechyen, D. Aht-Ong, V. Sricharoenchaikul and D. Atong
Surface Characterization of Oxygen Plasma Treated Nano-SiO2 Sol-Gel
Coating UHMWPE Filaments
Y.C. Zhang, F.J. Shi, J.X. He, H.Y. Wu and Y.P. Qiu
Pyrolysis of Solid Waste by Thermogravimetric Analysis
L. Li and X.G. Luo
Preparation and Characterization of Thermoplastic Soy Protein Isolate
Y. Lu, X.G. Luo, X.Y. Lin and P. He
An Enhanced Algorithm for Detecting Blisters of Glass by Machine Vision
C.H. Han, Y.K. Ryu, C.S. Oh and B.W. Choi
Effects of Carbon Fiber Architecture on the Microstructure and Mechanical
Property of C/C-SiC Composites
J.P. Wang, J.Y. Lou, Z. Xu, Z.H. Jin and G.J. Qiao
Process Feasibility Study on Thermal-Plasma System for HFC-23 Decomposition
J.K. Lee, K.Y. Cho, S.D. Lee, H.Y. Lee, W.Y. Chang and J.C. Lim
Modeling of the Stress in 13Cr Supermartensitic Stainless Steel Welds by
Artificial Neural Network
J.H. Yu, D.N. Zou, Y. Han and Z.Y. Chen
Artificial Neural Network Approach to Predict Mechanical Properties of
Austenitic Stainless Steel
Z.Y. Chen, D.N. Zou, J.H. Yu and Y. Han
Study of Cyclohexane Photooxidation over Pt-WO3 Catalysts Mixed with TiO
under Visible Light Irradiation
Y. Ichihashi, S. Saijo, M. Taniguchi, K. Taniya and S. Nishiyama
Removal of NO2 and SO2 Using Porous Media Made from Sewage Sludge
Y.S. Yoo, E.Z. Park, H.J. Ban and H.J. Chae
Influence of Strain Aging on the Microstructure-Property of an X100 Pipeline Steel
X.Y. Zhang, H.L. Gao, L.K. Ji and C.J. Zhuang
Effect of Electron Beam Irradiation on the Properties of Polyethylene Oxide–TiO
Composite Electrolyte for Dye Sensitized Solar Cells
M. Shaheer Akhtar, U.Y. Kim, D.J. Choi and O.B. Yang
C. Eco-Materials Processing and Design
Study on the Static Recrystallization Behavior of Thermal Deformation of
Austenitic Stainless Steel for Nuclear Power
J. Liu, G.W. Fan, P.D. Han, J.F. Yang, J.S. Liu, D.S. Ge and G.J. Qiao
Synthesis of Ternary Machinable Al2O3/Ti2AlC Composites by High Energy Milling
and In Situ Hot-Pressing Method
F. Wang, B.B. Liu, J.F. Zhu and Y.L. Li
Novel Preparation of Silver-Coated Copper in Aqueous Solution
Y.H. Song, T. Su, Y. Yang, X.Z. Lan and H. Zhan
The Theoretical Research of Constitutive Property, Reactivity and
FTIR of Chitosan
J.Q. Xue, D.D. Wen, L.H. Yu, Y.J. Wang and J. Zhu
Synthesis of Ti3AlC2 Powder by High Energy Ball Milling and High
Temperature Heat Treatment
J.F. Zhu, G.Q. Qi, H.B. Yang and F. Wang
Scale and Corrosion Inhibition Efficiency of a Novel Terpolymer
M. Wu, J.Q. Xue, L.H. Yu, X.N. Ma and J. Zhu
Effect of Foaming Temperature on Pore Morphology of Al/AlN Composite Foam
Fabricated by Melt Foaming Method
Y.H. Song, M. Tane, T. Ide, Y. Seimiya, B.Y. Hur and H. Nakajima
Dynamic Compression Behavior of Lotus-Type Porous Iron
M. Tane, T. Kawashima, K. Horikawa, H. Kobayashi and H. Nakajima
Formation of Hollow and Porous Nanostructures of Iron Oxides via Oxidation of
Iron Nanoparticles and Nanowires
R. Nakamura and H. Nakajima
Fabrication of Lotus-Type Porous Magnesium with Anisotropic Directional Pores
by Mold Casting Technique
K. Sugihara, S. Suzuki and H. Nakajima
Fabrication of Lotus-Type Porous Al-Ti Alloys Using the Continuous
Casting Technique
T.B. Kim, S. Suzuki and H. Nakajima
Effect of Transfer Velocity on Porosity of Lotus-Type Porous Aluminum Fabricated
by Continuous Casting Technique
Y. Iio, T. Ide and H. Nakajima
Effect of Addition of NiO Powder on Pore Formation in Lotus-Type Porous Carbon
Steel Fabricated by Continuous Casting
M. Kashihara, H. Yonetani, S. Suzuki and H. Nakajima
Effect of Pore Diameter Distribution on Heat Transfer Capacity of Lotus-Type
Porous Copper Heat Sink for Air Cooling
H. Chiba, T. Ogushi, S. Ueno and H. Nakajima
Evaluating Durability and Burying Characteristic of PVC Pipe
H.D. Lee, P.J. Kwak and J.Y. Lee
Hot Corrosion of NiCrAlY/(ZrO2-CeO2-Y2O3) Composite Coatings in
NaCl-Na2SO4 Molten Salt
J.H. Lee and D.B. Lee
Formation of Oxide Nanotubes and Bamboo-Like Structures via Oxidation of
Cu, Fe and Ni Nanowires
G. Matsubayashi, R. Nakamura, H. Tsuchiya, S. Fujimoto and H. Nakajima
Study on Bonding Performances of Air Plasma Treated FRP
Y.L. Xiong, J.Y. Gu and Y.C. Hu
Fabrication of Lotus-Type Porous Iron by Thermal Decomposition Method
T. Ide, T. Wada and H. Nakajima
EPP (Expanded Polypropylene) Media for Treating Trace Metals from Road
Runoff: Performance Risk Assessment Using Uncertainty Analysis
S.W. Kang, S.K. Kim, S.L. Yun, H.C. Oh and J.H. Ahn
Experiment on Combustion-Supporting Agent on PCI for Combustibility
of Coal Powder
S.P. Yang, J. Dong and M. Wang
Effects of Oxygen Plasma Treated Carbon Nanotube Coating Basalt Filaments
H.Y. Wu, W. Zhang, Y.C. Zhang and Y.P. Qiu
Influence of Vanadium on Aging Characteristics of Cold Rolled Cu-Ni-Si Alloy
Z.P. Que, H.M. Jung, J.H. Lee, K.J. Euh and S.Z. Han
Experimental Study on Thermal Characteristics of Environment-Friendly Blocks
with Water-Absorbing Polymer
J.B. Park, R.H. Kim, S.H. Lee and H.B. Pyun
Study on Thermal Environmental Characteristics of Water-Retentive
Asphalt Pavement
H.B. Pyun, R.H. Kim, S.H. Lee and J.B. Park
3D Free Form Fabrication Using the Pivoting Side Trowel with Ceramic Material
H.K. Kwon and M.K. Jang
Optimization Design of the Bonding Property between Flanges and Web
Plates of Wood I-Joists
Y.C. Hu, X.J. Zhang, F.C. Cheng, L. Zhang and J. Li
Use of Fly Ash as Bonding Material on Low Thermal Expansion Porous Materials
I. Juárez-Ramírez, A. Zaldivar-Cadena, L.M. Torres-Martínez, S.I. Suárez-Vázquez,
A. Sánchez-Vázquez, K. Matsumaru and K. Ishizaki
Red Tide Inactivation by Silver Doped TiO2 Produced in Sono-Chemistry Method
S.H. Cho, Z.Y. Fu, K. Niihara, S. Obregon-Alfaro and S.W. Lee
The Dominant Factor Analysis of Production Technology of Poplar LVL
Based on Grey Theory
L. Feng and Y.C. Hu
The Development of Solid Fabric Filter for CSOs Treatment
H.C. Oh, S.K. Kim, S.W. Kang, S.L. Yun and J.H. Ahn
Strength Enhancement of Geopolymer-Based Concretes by Mixed
Alkaline Activators
Z.X. Yang, K.H. Hwang, M.C. Kim, J.Y. Yang and S.K. Lim
Evaluation on Application of Artificial Soil Made by Organic Wastes
Y.S. Yoo, H.J. Chae, H.J. Ban and E.Z. Park
Development of Non Explosive Insulating and Fire Proof Materials Using Porous
Industrial Byproducts
S.R. Kim, W.T. Kwon, B.I. Kim, Y.H. Kim and S.W. Ha
Decomposition Characteristics of Wood Using Supercritical Methanol for
Biodiesel Production
S.C. Oh, Y.H. Kim and S.R. Kim
Effect of SiC Particle Size on Anti-Oxidation Behavior of C/B4C/SiC Composite
H. Sano, G.B. Zheng and Y. Uchiyama
Eco-Friendly Fabrication Process of AlTiC Grain Refiner
H. Cho
Efficiency Evaluations of Filter Media for Reduction of Non Point Source
in Urban Area
S.K. Kim, H.C. Oh, S.W. Kang, S.L. Yun and J.H. Ahn
Corrosion Control of Drinking Water Copper Pipes by Corrosion Inhibitor
J.H. Ahn, H.D. Lee, S.K. Kim, P.J. Kwak and J.Y. Lee
Application of Polymer Media to the Site for Treatment of Pollutants in Rainfall
Effluent of Urban District
S.L. Yun, S.W. Kang, S.K. Kim, J.H. Ahn and H.C. Oh
Deformation of Lotus-Type Porous Copper in Rolling
H. Utsunomiya, T. Yukimoto, T. Sakai, S. Suzuki and H. Nakajima
Elastic and Plastic Deformation Behaviors of Lotus-Type Porous Copper
M. Tane and H. Nakajima
Blow Forming of Lightweight Titanium Components
H.S. Lee, J.H. Yoon and Y.M. Yi

D. High Performance Materials Including Nano-Materials for the Environment

High Purity Ti2AlC Powder Prepared by a Novel Method
J.F. Zhu, G.Q. Qi, F. Wang and H.B. Yang
Effect of Atmosphere on the Crystallization of Amorphous Silicon Nitride
L. Fan, H.J. Wang and J.S. Yue
The Mechanical Properties and Fracture Characteristics of
AlN/Ti Laminated Composites
T. Zhang, W.Z. Li, H.Y. Jin, G.J. Qiao and Z.H. Jin
Effect of Processing Condition on the Microstructure and Mechanical Properties
of Ti3SiC2/SiC Composites
H.F. Yin and L.L. Lu
Fabrication and Microstructure of Fe-Al Intermetallic Compound Powders
by Mechanical Alloying
T. Jiang and H.Y. Jin
Ni Nanoparticles Deposition onto CNTs by Electroless Plating
G.S. Cho, J.K. Lim, K.H. Choe and W.S. Lee
Study on the Erosion Wear Properties of Reaction-Bonded SiC
Z.L. Lu, Z.G. Xing, Y.X. Zhou and H. Xie
Effect of SiC Particle Sizes on Erosion Wear Behaviour of SiC/Epoxy
Resin Composite
Z.L. Lu, Z.G. Xing, H. Xie and Y.X. Zhou
Effects of Thickness on Thermal and Mechanical Properties of Air-Plasma Sprayed
Thermal Barrier Coatings
S.Y. Lee, J.Y. Kwon, T.W. Kang, Y.G. Jung and U.Y. Paik
Microstructure Characterization of Duplex Stainless Steel Welding Joint with
Different Solution and Aging Treatment
J. Yang, T.Y. Zhang, J.H. Yu, W. Zhang and J. Li
Influence of Sigma Phase Precipitation on Pitting Corrosion of 2
Super-Duplex Stainless Steel
Y. Han, D.N. Zou, W. Zhang, J.H. Yu and Y.Y. Qiao
Improvement of Oxidation Resistance of SiC/C (Graphite) Composites by
Silicon Infiltration in Surface
H.W. Li, Q. Zhang, Z.H. Jin, J.P. Wang and H.Y. Jin
Studies on the Molecular Chain Conformation and Morphology of Konjac
Glucomannan in Aqueous Solution
X.Y. Long, X.G. Luo, J. Bai and J.F. Zhu
Nano Composite Membranes of Sulfonated Amine-Poly(ether sulfone)s and SiO2 for
Fuel Cell Application
D.W. Seo, Y.D. Lim, S.H. Lee, M.M. Islam, H.M. Jin, K.H. Lee, H.H. Jang
and W.G. Kim
Synthesis and Characterization of Aminoalky Cellulose
H.G. Zhu, X.Y. Lin, X.G. Luo and J.P. Zhang
Synthesis of SiOC Base Fibers from Silicone Resin with Low Carbon Content and
Control of Surface Functionality by Metal Chloride Treatment in Vapor
M. Narisawa, Y. Satoh, R. Sumimoto, T. Kamegawa and H. Yamashita
Effects of Different Solid Lubricants on Mechanical and Tribological Properties of
Al2O3/ZrO2 Nanocomposites
S.H. Kim, S.H. Cho, S.P. Hannula and S.W. Lee
Microstructure and Wear Performance of Cu-Mo-Si Alloys Fabricated by Self-
Propagation High-Temperature Synthesis
H. Xie, L. Jia, S.M. Wang, J.L. Zhu and Z.L. Lu
Microstructure and Mechanical Properties of Ca-a-Sialon with
Low Oxygen Content
Z.F. Yang, H. Wang, X.M. Min, W.M. Wang and Z.Y. Fu
High Strength and Toughness Al2O3 Composite Materials for the Improvement of
Ceramic Channel in SRL Hot Dipping System
H.H. Lee, S.H. Kim, B. Joshi, S.H. Cho and S.W. Lee
Influence of Preparation Methods of Supported Zr Oxide Catalysts for Meervein-
Ponndorf-Verlay Reduction of Acetophenone
K. Taniya, A. Izumi, Y. Ichihashi and S. Nishiyama
Electrodeposition of Ni-SiC Nano Composite in Presence of Ultrasound
G. Gyawali, S.H. Cho, D.J. Woo and S.W. Lee
Boron Nitride Doped Transparent Polycrystalline Silicon Nitride Ceramics
B. Joshi, H.H. Lee, S.H. Kim, Z.Y. Fu, K. Niihara and S.W. Lee
Effect of Solution Temperature on Microstructure of 2205 Duplex Stainless
Steel Welded Joints
Y.Y. Qiao, D.N. Zou, J. Li and Y. Han
Front End Bending in Plate Rolling Influenced by Asymmetrical Entrance Angle
Y.H. Pang, Y.L. Hu, Q. Sun, C.R. Liu, H.F. Yu, B. Lu and M.M. Zhang
A Model of Calculating Contact Length between Stock and Roll
during Plate Rolling
Q. Sun, Y.H. Pang, C.R. Liu, H.F. Yu, B. Lu and M.M. Zhang
Effects of the Cooling Rate on the Solidification Microstructure of Cu-Ni Alloy
J.W. Yuan, Y.H. Pang, Y.L. Hu, Q. Sun, D. Liu and Y.H. Yang
Study on the Microstructure of Au/CdZnTe Interface by HRTEM
S. Jie, F. Li and N.Z. Ming
Surface Nanocrystallization of Zircaloy-4 by Surface Mechanical
Attrition Treatment
C.H. Zhang, X.G. Duan, L. Zhou and X.Z. Lan

E. Hybrid Materials and Composites for Eco Society

Improvement of the Dry Friction and Wear Properties of the Si/SiC by Doping
with Ni and PbO
K.Z. Sang, W.C. Wang and G.Q. Geng
Fabrication and Thermal Property of AlN/ Epoxy Composites
H.Y. Jin, H.C. Shi, B. He, N.K. Gao and Z.R. Peng
Preparation and Dielectric Properties of Alumina Filled Epoxy Nano-Composite
H.C. Shi, N.K. Gao, H.Y. Jin and C.B. Wang
Optimization Fabrication of Plasma Treated Nano-Titanium Dioxide
Particles/PP/PLA Composites Filaments Using Melt Spinning
Y.C. Zhang, Z.F. Zhu, H.Y. Wu and Y.P. Qiu
Electroless Copper Plating on Ti3SiC2 Powder Surface Using Ascorbic Acid as a
Reducing Agent
Y.R. Cui, Y.H. Xu, K.M. Li, X.M. Li, J. Yang and J. Wang
Dynamic and Static Properties of Wood-Plastic Composites Made of Recycled High-
Density Polyethylene
G.W. Yu, Y.C. Hu and J.Y. Gu
Analysis on Microstructure and Mechanical Properties of Pine Laminated
Veneer Lumber
B. Xue, Y.C. Hu, F.C. Cheng and L. Zhang

F. Photocatalysis for a Better Environment and Clean Energy

Fabrication and Application of Photocatalytic TiO2 Metal Membrane with Self-
Organized Nano Tubes for Water Treatment
J.O. Kim and W.Y. Choi
A New Preparation Method of Visible Light Responsive Titanium Dioxide
Photocatalytic Films by Ultraviolet Irradiation
K. Nishizawa, E. Watanabe and M. Maeda
Sol-Gel Preparation of Bi2InTaO7 and its Photocatalytic Behavior for Organic
Compounds Degradation
L.M. Torres-Martínez, I. Juárez-Ramírez, J.S. Ramos-Garza, F. Vázquez-Acosta
and S.W. Lee
Effect of Calcination Temperature on the Photocatalytic Activity of
Porous TiO2 Film
T. Miki, K. Nishizawa, E. Watanabe and H. Taoda
Synergistic Effects of Ferric Stearate, Ferrocene and NiDBC
Z. Zhao, X.G. Luo and X.Y. Lin

G. Dye-Sensitized Solar Cells for the Utilization of Solar Energy

Photoinduced Absorption in P3HT/PCBM Bulk Heterostructures
K. Kinoshita, T. Kobayashi, T. Nagase and H. Naito
Evaluation Methods of Energy-Storable Dye-Sensitized Solar Cells
Y. Saito, K. Iwata, S. Uchida, T. Kubo and H. Segawa

H. Bio-Inspired Materials for a Better Life and Other Novel Materials

In Vitro Bioactivity, Cytotoxicity and Blood Compatibility of Anti-Bacterial
Vacuum Plasma Sprayed Titanium Coatings
Y.K. Chen, X.B. Zheng, B.O. Li, Y.T. Xie and C.X. Ding

Keyword Index
Author Index
Note: Product cover images may vary from those shown
3 of 4
Hyungsun Kim, JianFeng Yang, Tohru Sekino, Masakazu Anpo and Soo Wohn Lee
Note: Product cover images may vary from those shown
4 of 4
Note: Product cover images may vary from those shown