Mrs
Dr
Miss
Ms
Prof
Printer Friendly
Printed from http://www.researchandmarkets.com/reports/1459480
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV. Ceramic Engineering and Science Proceedings. Volume 31, Issue 8
Description:
This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including green manufacturing, smart processing, advanced composite manufacturing, rapid processing, joining, machining, and net shape forming technologies. These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.
Contents:
Preface.
Introduction.
GREEN MANUFACTURING AND SMART PROCESSING.
Securing the Supply of Precious and Special Metals?The Need of Closing the Loop (Christian Hagel?ken).
Mechanical Properties of Cr-Si-N-O Thin Films Deposited by RF Reactive Unbalanced Magnetron Sputtering (Jun Shirahata, Tetsutaro Ohori, Hiroki Asami, Tsuneo Suzuki, Tadachika Nakayama, Hisayuki Suematsu, and Koichi Niihara).
Room-Temperature Deposition and Magneto-Optical Properties of Transparent Cobalt/Lead Zirconate Titanate (PZT) Nanocomposite Films by Aerosol Deposition (Jae-Hyuk Park and Jun Akedo).
Influence of Dispersant on Rheology of Zirconia-Paraffin Feedstocks and Mechanical Properties of Micro Parts Fabricated via LPIM (Fatih A. Cetinel, Marcus M?ller, Joachim Rogner, Werner Bauer, and J?rgen Hausselt).
ADVANCED COMPOSITE MANUFACTURING.
Fiber-Reinforced Ceramic Matrix Composites Processed by a Hybrid Process Based on Chemical Vapor Infiltration, Slurry (Impregnation and Spark Plasma Sintering (Jerome Magnant, Rene Pailler, Yann Le Petitcorps, Laurence Maille, Alain Guette, Jimmy Marine, and Eric Philippe).
Manufacturing of the CMC Nose Cap for the Expert Spacecraft (Christian Zuber, Thomas Reimer, Kornelia Stubicar, Bernhard Heidenreich, and Hermann Hald).
The Nature of Silicon Carbide Phases Developed from Different Carbonaceous Sources and Its Impact on the Microstructure of Cf/C-SiC Composites (Andrew Leatherbarrow and Houzheng Wu).
Shaping Radiation Curable Colloidal Dispersions?From Polymer/Ceramic Fibers and Microspheres to Gradient Porosity Ceramic Bulk Materials (Yoram de Hazan, Maciek Wozniak, Judit Heinecke, Gregor M?ller, Veronika M?rkl, and Thomas Graule).
Melt-Infiltration Processing of Titanium Carbide-Stainless Steel Cermets (Tyler Stewart, R. Bradley Collier, Zoheir N. Farhat, Georges J. Kipouros, and Kevin P. Plucknett).
Oxidation Behavior of Zirconium Diboride-Silicon Carbide Composites (Ipek Akin, Filiz Cinar Sahin, Onuralp Yucel, and Gultekin Goller).
RAPID PROCESSING.
Nano-Crystalline Yttria Samaria Codoped Zirconia: Comparison of Electrical Conductivity of Microwave and Conventionally Sintered Samples (Soumyajit Koley, Abhijit Ghosh, Ashok Kumar Sahu, and Ashok Kumar Suri).
Spark Plasma Sintering (FAST/SPS) of Novel Materials?Taking the Next Step Forward to Industrial Production (H. U. Kessel, J. Hennicke, R. Kirchner, andT. Kessel).
Rapid Manufacturing of Ceramic Parts by Selective Laser Melting (Jan Wilkes, Yves-Christian Hagedorn, S?rn Ocylok, Wilhelm Meiners, and Konrad Wissenbach).
JOINING AND MACHINING.
Active Metal Brazing and Characterization of Brazed Joints between Silicon Carbide and Metallic Systems (Bryan P. Coddington, Rajiv Asthana, Michael C. Halbig, and Mrityunjay Singh).
Joining of Silicon Nitride with Glass or Powder under Mechanical Pressure (Naoki Kondo, Hideki Hyuga, Takaaki Nagaoka, and Hideki Kita).
Fabrication of Thermodynamic Crystals by Structural Joining (Soshu Kirihara, Yasunori Uehara, and Youhei Takinami).
Effect of Various Factors on Interface Formation in Magnetic Pressure Seam Welding (Hisashi Serizawa, Isao Shibahara, Sherif Rashed, Hidekazu Murakawa, and Shinji Kumai).
Production Environment Laser Assisted Machining of Silicon Nitride (Federico Sciammarella, Joe Santner, Jeff Staes, Richard Roberts, Frank Pfefferkorn, Stephen T. Gonczy, Stefan Kyselica, and Ricardo Deleon).
NET SHAPE FORMING.
Gelcasting of High Performance Carbide Ceramics with Larger Size/Complex Shape (Dongliang Jiang).
Processing of Complex-Shaped Micro Parts by Reaction-Bonding and Sintering of Silicon Nitride (M. M?ller, W. Bauer, R. Knitter, and J. Rogner).
Thermoplastic Ceramic Injection Molding of Zirconia Toughened Alumina Components (F. Kern, M. Abou El-Ezz, and R. Gadow).
Fabrication of Alumina Dental Crown Model with Biomimetic Structure by Using Stereolithography (Mitsuyori Suwa, Soshu Kirihara, and Taiji Sohmura).
Author Index.
Introduction.
GREEN MANUFACTURING AND SMART PROCESSING.
Securing the Supply of Precious and Special Metals?The Need of Closing the Loop (Christian Hagel?ken).
Mechanical Properties of Cr-Si-N-O Thin Films Deposited by RF Reactive Unbalanced Magnetron Sputtering (Jun Shirahata, Tetsutaro Ohori, Hiroki Asami, Tsuneo Suzuki, Tadachika Nakayama, Hisayuki Suematsu, and Koichi Niihara).
Room-Temperature Deposition and Magneto-Optical Properties of Transparent Cobalt/Lead Zirconate Titanate (PZT) Nanocomposite Films by Aerosol Deposition (Jae-Hyuk Park and Jun Akedo).
Influence of Dispersant on Rheology of Zirconia-Paraffin Feedstocks and Mechanical Properties of Micro Parts Fabricated via LPIM (Fatih A. Cetinel, Marcus M?ller, Joachim Rogner, Werner Bauer, and J?rgen Hausselt).
ADVANCED COMPOSITE MANUFACTURING.
Fiber-Reinforced Ceramic Matrix Composites Processed by a Hybrid Process Based on Chemical Vapor Infiltration, Slurry (Impregnation and Spark Plasma Sintering (Jerome Magnant, Rene Pailler, Yann Le Petitcorps, Laurence Maille, Alain Guette, Jimmy Marine, and Eric Philippe).
Manufacturing of the CMC Nose Cap for the Expert Spacecraft (Christian Zuber, Thomas Reimer, Kornelia Stubicar, Bernhard Heidenreich, and Hermann Hald).
The Nature of Silicon Carbide Phases Developed from Different Carbonaceous Sources and Its Impact on the Microstructure of Cf/C-SiC Composites (Andrew Leatherbarrow and Houzheng Wu).
Shaping Radiation Curable Colloidal Dispersions?From Polymer/Ceramic Fibers and Microspheres to Gradient Porosity Ceramic Bulk Materials (Yoram de Hazan, Maciek Wozniak, Judit Heinecke, Gregor M?ller, Veronika M?rkl, and Thomas Graule).
Melt-Infiltration Processing of Titanium Carbide-Stainless Steel Cermets (Tyler Stewart, R. Bradley Collier, Zoheir N. Farhat, Georges J. Kipouros, and Kevin P. Plucknett).
Oxidation Behavior of Zirconium Diboride-Silicon Carbide Composites (Ipek Akin, Filiz Cinar Sahin, Onuralp Yucel, and Gultekin Goller).
RAPID PROCESSING.
Nano-Crystalline Yttria Samaria Codoped Zirconia: Comparison of Electrical Conductivity of Microwave and Conventionally Sintered Samples (Soumyajit Koley, Abhijit Ghosh, Ashok Kumar Sahu, and Ashok Kumar Suri).
Spark Plasma Sintering (FAST/SPS) of Novel Materials?Taking the Next Step Forward to Industrial Production (H. U. Kessel, J. Hennicke, R. Kirchner, andT. Kessel).
Rapid Manufacturing of Ceramic Parts by Selective Laser Melting (Jan Wilkes, Yves-Christian Hagedorn, S?rn Ocylok, Wilhelm Meiners, and Konrad Wissenbach).
JOINING AND MACHINING.
Active Metal Brazing and Characterization of Brazed Joints between Silicon Carbide and Metallic Systems (Bryan P. Coddington, Rajiv Asthana, Michael C. Halbig, and Mrityunjay Singh).
Joining of Silicon Nitride with Glass or Powder under Mechanical Pressure (Naoki Kondo, Hideki Hyuga, Takaaki Nagaoka, and Hideki Kita).
Fabrication of Thermodynamic Crystals by Structural Joining (Soshu Kirihara, Yasunori Uehara, and Youhei Takinami).
Effect of Various Factors on Interface Formation in Magnetic Pressure Seam Welding (Hisashi Serizawa, Isao Shibahara, Sherif Rashed, Hidekazu Murakawa, and Shinji Kumai).
Production Environment Laser Assisted Machining of Silicon Nitride (Federico Sciammarella, Joe Santner, Jeff Staes, Richard Roberts, Frank Pfefferkorn, Stephen T. Gonczy, Stefan Kyselica, and Ricardo Deleon).
NET SHAPE FORMING.
Gelcasting of High Performance Carbide Ceramics with Larger Size/Complex Shape (Dongliang Jiang).
Processing of Complex-Shaped Micro Parts by Reaction-Bonding and Sintering of Silicon Nitride (M. M?ller, W. Bauer, R. Knitter, and J. Rogner).
Thermoplastic Ceramic Injection Molding of Zirconia Toughened Alumina Components (F. Kern, M. Abou El-Ezz, and R. Gadow).
Fabrication of Alumina Dental Crown Model with Biomimetic Structure by Using Stereolithography (Mitsuyori Suwa, Soshu Kirihara, and Taiji Sohmura).
Author Index.
Author
Tatsuki Ohji
Mrityunjay Singh NASA Glenn Research Center.
Mrityunjay Singh NASA Glenn Research Center.
Ordering:
Order Online - visit http://www.researchandmarkets.com/reports/1582661
Order by Fax - using the order form below
Order By Post - print the order form below and send to
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Page 1 of 2
Printed Tuesday, May 21, 2013
4:41:45 PM
4:41:45 PM
Fax order form
To place a fax order simply print this form, fill in and fax the completed form to the number below. If you have any questions please email help@researchandmarkets.net
Order information
Please verify that the product information is correct and select the format you require.
Product name
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV. Ceramic Engineering and Science Proceedings. Volume 31, Issue 8
Web Address
http://www.researchandmarkets.com/reports/1459480
Office Code
OC8DIQSPUPWWPV
Report Formats
Please enter the quantity of the report format you require.
| Format | Quantity | Price | Hard Copy (Hard Back) |
|
EURO€ 70.00 + EUR€ 25.00 Shipping/Handling * |
|---|---|---|
| Hard Copy (Hard Back) |
|
EURO€ 70.00 + EUR€ 25.00 Shipping/Handling * |
* Shipping/Handling is only charged once per order.
Contact information
Please enter all the information below in block capitals.
Title:
Mr
Mrs
Dr
Miss
Ms
Prof
Mrs
Dr
Miss
Ms
Prof
First Name:
Last Name:
Email Address:
Job Title:
Organisation:
Address:
City:
Postal / Zip Code:
Country:
Phone Number:
Fax Number:
Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)
Page 2 of 2
Printed Tuesday, May 21, 2013
4:41:45 PM
4:41:45 PM
Payment information
Please indicate the payment method you would like to use by selecting the appropriate box.
Pay by Credit Card:
American Express
Diners Club
Master Card
Visa
Cardholder's Name:
Cardholder's Signature:
Expiry Date:
/
Card Number:
CVV Security Code:
Issue date:
/ (Diners Club only)
Pay by Check:
Please post the check, accompanied by this form, to:
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Pay by Wire Transfer:
Please transfer funds to:
Account Number:
83313083
Sort Code:
98-53-30
Swift Code:
ULSBIE2D
IBAN Number:
IE78ULSB98533083313083
Bank Address:
Ulster Bank,
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
If you have a Marketing Code please enter it below:
Marketing Code:
Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at http://www.researchandmarkets.com/info/terms.asp