Medical Applications of Novel Biomaterials and Nano-Biotechnology
Trans Tech Publications Inc, March 2011, Pages: 280
Series: Advances in Science and Technology Vol. 76
Selected papers from the 5th Forum on New Materials, part of CIMTEC 2010-12 th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 13-18, 2010
The 40 peer-reviewed papers collected here together offer a plenitude of up-to-date information on “Medical Applications of Novel Biomaterials and Nano-Biotechnology”. The papers are conveniently arranged into ADVANCES IN BIOMATERIALS, MEDICAL DIAGNOSIS APPLICATIONS, REGENERATIVE MEDICINE AND TISSUE ENGINEERING, NEW THERAPEUTICS AND INTELLIGENT DELIVERY SYSTEMS, PROGRESS IN IMPLANT PROSTHESES.
This special volume has also been published online in the series, “Advances in Science and Technology” Vol. 77
Table of Contents (40 papers, 10 per page listed)
Essential Factors to Make Excellent Biocompatibility of Phospholipid Polymer Materials
Kazuhiko Ishihara, Yuuki Inoue
Supramolecular Surfaces Modulating Cellular Response
Nobuhiko Yui
Molecular Modeling and Experimental Investigation of Hydrolytically Degradable Polymeric Biomaterials
Dieter Hofmann, Maria Entrialgo, Jürgen Reiche, Karl Kratz, Andreas Lendlein
Development of Bone-Integrating Hybrid Materials Useful for Hard Tissue Repair
Toshiki Miyazaki
Biodegradable Polymers Derived from Amino Acids for Biological Applications
Naomi Cohen-Arazi, Ilanit Hagag, Michal Kolitz, Abraham J. Domb, Jeoshua Katzhendler
Self-Assembled N-Succinyl-Chitosan Nanofibers for Reduced Protein Adhesion
Eyas Dayyoub, Udo Bakowsky
Mineralization of Eroded Dental Enamel Seeded with Fluoride and a Tricalcium Phosphate Ternary Biomaterial
Robert L. Karlinsey, Allen C. Mackey, Emily R. Walker, Trenton J. Walker, Christabel X. Fowler
A New Generation of Scaffolds for Bone Tissue Engineering
Devis Bellucci, Valeria Cannillo, Andrea Cattini, Antonella Sola
XRD Studies on Transformation of Calcium-Deficient Apatite to ß and a TCP in Dynamic and Technological Conditions
Bartosz Handke, Aneta Zima, Zofia Paszkiewicz, Anna Slósarczyk
Effects of Mg Additives on Properties of Mg-Doped Hydroxyapatite Ceramics
Aneta Zima, Anna Slósarczyk, Zofia Paszkiewicz, Magdalena Staszewska, Waldemar Mróz, Anna Chróscicka
Osseointegration and Biocompatibility Study of Macroporous Biphasic Calcium Phosphate (BCP) Ceramics Obtained by Consolidation Using Albumin
Christiane Ribeiro, Tamiye S. Goia, Kalan B. Violin, José Carlos Bressiani, Ana Helena Almeida Bressiani
New Corrosion-Resistant Bactericidal Nitrogen-Containing Steels with Increased Strength
Liudmila Kaputkina, V. Prokoshkina, A.G. Svyazhin
Novel Biomaterials and Nano-Biotechnology Approaches in Tumor Diagnosis
Amit Kumar Dinda, Chandravilas Keshvan Prashant
Sensing of Protein Adsorption by Composites Consisting of Silver Nanoparticles and Hydroxyapatite
Chikara Ohtsuki, Yuji Ichikawa, Hiroyuki Shibata, Tsukasa Torimoto, Ill Yong Kim
Incorporation of Acrylate Based Spiropyran Monoliths in Micro-Fluidic Devices for Photo-Controlled Electroosmotic Flow
Silvia Scarmagnani, Zarah Walsh, Fernando Benito-Lopez, Mirek Macka, Brett Paull, Dermot Diamond
Bone-Mimetic Laminated Nano-Structures for Regeneration of Skeletal Tissues
Esmaiel Jabbari
Engineered Biomimetic Nanofibers for Regenerative Medicine
Seeram Ramakrishna, Jayarama Reddy Venugopal, Susan Liao
Tissue Engineering with Natural Tissue Matrices
Akio Kishida, Seiichi Funamoto, Jun Negishi, Yoshihide Hashimoto, Kwangoo Nam, Tsuyoshi Kimura, Toshiya Fujisato, Hisatoshi Kobayashi
A Hydroxyapatite-Collagen Composite Useful to Make Bioresorbable Scaffolds for Bone Reconstruction
Giulio D. Guerra, Caterina Cristallini, Elisabetta Rosellini, Niccoletta Barbani
Specific Cell Cultivation on Nanofibrous Layer
Jirí Michálek, Dana Mareková, Lenka Martinová, Radka Hobzová, Petra Kostecká, Daniela Lubasová, Petr Lesný, Martin Prádný, Pavla Jendelová, Eva
Syková
Study on Bone Cell Adaptability of a-TCP/HAp Functionally Graded Porous Beads for Biomaterials Application
S. Ohtake, T. Asaoka, K. Furukawa, T. Ushida, T. Tateishi
Self-Buckling at the Nanoscale
Nicola Maria Pugno
Modeling the Elastic Anisotropy of Woven Hierarchical Tissues: Experimental Comparison on Biological Materials and Design of a New Class of Scaffolds
Nicola Maria Pugno, Qiang Chen
Catastrophic Instabilities in the Fracture of Nanotube Bundles
Nicola Maria Pugno, Tamer Abdalrahman
XPS Characterization of Iron Oxide and Gold Nanoparticles for Tumor Care
Giorgio Speranza, L. Minati, Simona Torrengo, Barbara Rossi, Claudio Migliaresi, Devid Maniglio, Luca Dalbosco
Novel Silicon Based Gene Carrier Systems
Anett Sommerwerk, Guido Struckmeyer, Janine Tillmann, Michael Uhr, J. Schäfer, Heinrich Richter, Udo Bakowsky
Nanotechonology for Drug Targeting
Barbara Ruozi, Giovanni Tosi, Flavio Forni, Maria Angela Vandelli
Development of Pseudoboehmites for Nanosystems to Release Acyclovir
Antonio Hortencio Munhoz Jr., R.W. Novickis, Sonia Braunstein Faldini, Roberto Rodrigues Ribeiro, C.Y. Maeda, L.F. de Miranda
Study of Chitosan Addition in the PVP/PVAL Polymeric Blend
Mauro Cesar Terence, L.F. de Miranda, Sonia Braunstein Faldini, Paula Junqueira de Castro
A Critical Assessment of the Clinical Efficacy and Cellular Response to Low Intensity Pulsed Ultrasound for Fracture Repair
Cato T. Laurencin, Yusuf Khan
Development of Cardiovascular Implants Using Nanocomposite Polymer and Stem Cell Technology: From Lab to Commercialisation
Alexander M. Seifalian, Achala de Mel, Hossein Ghanbari, Max Ahmed, Karla Chaloupka, Arnold Darbyshire
Novel, Rapidly Resorbable Bioceramic Bone Grafts Produce a Major Osteogenic Effect - The Pre-Clinical Evidence
Christine Knabe, Georg Berger, Renate Gildenhaar, Paul Ducheyne, Michael Stiller
Nano-Scale Evaluation of Surface Morphology Before and After Environmental Exposure In Vitro of an Advanced Alumina/Zirconia Composite for Arthroplastic Applications
Kengo Yamamoto, Giuseppe Pezzotti
Carbon Nanotubes In Vitro and In Vivo Biological Effects
Stefano Bellucci
Role of Grain Size Fluctuations on the Environmental Resistance of Alumina-Zirconia Composite in Comparison with Commercially Available Monolithic Zirconia Femoral Head
Nobuhiko Sugano, Giuseppe Pezzotti
Stoichiometry and Surface Stress Analyses in Advanced Alumina/Zirconia Composites for Hip Arthroplasty Applications
Alessandro Alan Porporati, Maria Chiara Munisso, Kristina Lessnau, Giuseppe Pezzotti
Development of Craniofacial Implants Produced by Metal Injection Molding of Titanium Alloy Using Novel Binder System Based on Palm Oil
R. Ibrahim, M. Azmirruddin, M. Jabir, M. Ridhuan, M. Muhamad, M. Rafiq, N.A. Kasim, Salina Muhamad
Creation of Superelastic Functional Properties in a Ti-50.7%Ni Wire for the Stapler Suturing of Blood Vessels
I. Khmelevskaya, M. Soutorine, S. Prokoskin, E. Ryklina
Osseointegration of Titanium Alloy Macroporous Implants Obtained by PM with Addition of Gelatin
Tamiye Simone Goia, Kalan Bastos Violin, Marcelo Yoshimoto, José Carlos Bressiani, Ana Helena Almeida Bressiani
An Efficient Low-pH Range Sensitive Artificial Muscle for Future Active Implantable Systems
Bertrand Tondu, Nicole Bardou, Stéphane Mathé
Pietro VINCENZINI, John A. JANSEN, Kazuhiko ISHIHARA and Thomas J. WEBSTER
Product Samples
A sample for this product is available. Please Login/Register to download this sample.
Customers who bought this item also bought
All rights reserved. © Copyright 2013 Research and Markets WWW5
Terms and Conditions Privacy Policy Publishers Employment Opportunities Site Map Link to us Webmaster Affiliate Network
