Printer Friendly

Printed from http://www.researchandmarkets.com/reports/1895198

Growth and Characterization of ITO thin film by Magnetron Sputtering. Edition No. 1

Description:
In this study Indium Tin Oxide (ITO) thin films were grown by both DC and RF magnetron sputtering techniques. To know deposition rate of ITO, system was calibrated for both DCMS and RFMS and then ITO were grown on glass substrate with the thickness of 70 nm and 40 nm by changing substrate temperature. The effect of substrate temperature, film thickness and sputtering method on structural, electrical and optical properties were investigated. The results show that substrate temperature and film thickness substantially affects the film properties,especially crystallization and resistivity. The thin films grown at the lower than 150 oC showed amorphous structure. However,crystallization was detected with the furtherincrease of substrate temperature. Band gap of ITO was calculated to be about 3.64eV at the substrate temperature of 150 oC, and itwidened with substrate temperature increment. From electrical measurements the resistivity at room temperature was obtained 1.28×10-4 and 1.29×10-4 D-cm, for DC and RF sputtered films, respectively. We also measured temperature dependence resistivity and the Hall coefficient of the films, and we calculated carrier concentration and Hall mobility.
 
Author
Öcal, Tuna.
The outhor was completed his becholar science at Dokuz Eylül University between the date of 2000 and 2005 and master of science was comleted at Izmir Institute of Technology at 2009. Currently he is doing his PhD at RWTH Aachen university in Germany and working on Growth of InN and In rich heterostructure by MOCVD and characterization of them.
 
Ordering:
Order Online - visit http://www.researchandmarkets.com/reports/1895198

Order by Fax - using the order form below

Order By Post - print the order form below and send to

Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.

 
Page 1 of 2
Printed Apr 17th 2014
5:37:10 PM

Fax order form

To place a fax order simply print this form, fill in and fax the completed form to the number below. If you have any questions please email help@researchandmarkets.net

Order information

Please verify that the product information is correct and select the format you require.

Product name

Growth and Characterization of ITO thin film by Magnetron Sputtering. Edition No. 1

Web Address

http://www.researchandmarkets.com/reports/1895198

Office Code

OC8DINPQMTPQUV

 

Report Formats

Please enter the quantity of the report format you require.

Format Quantity Price
Hard Copy (Paper Back) EUR 49 + EUR€ 25.00 Shipping/Handling *

* Shipping/Handling is only charged once per order.

Contact information

Please enter all the information below in block capitals.

Title:
Mr Mrs Dr Miss Ms Prof
First Name:
Last Name:
Email Address:
Job Title:
Organisation:
Address:
City:
Postal / Zip Code:
Country:
Phone Number:
Fax Number:

Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)

Page 2 of 2
Printed Apr 17th 2014
5:37:10 PM

Payment information

Please indicate the payment method you would like to use by selecting the appropriate box.

Pay by Credit Card:

American Express

Diners Club

Master Card

Visa

Cardholder's Name:
Cardholder's Signature:
Expiry Date:
/
Card Number:
CVV Security Code:
Issue date:
/ (Diners Club only)
 
Pay by Check:

Please post the check, accompanied by this form, to:

Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.

 
Pay by Wire Transfer:

Please transfer funds to:

Account Number:
83313083
Sort Code:
98-53-30
Swift Code:
ULSBIE2D
IBAN Number:
IE78ULSB98533083313083
Bank Address:
Ulster Bank,
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
 

If you have a Marketing Code please enter it below:

Marketing Code:

Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at http://www.researchandmarkets.com/info/terms.asp

Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)