Materials Integration

Trans Tech Publications Inc, July 2012, Pages: 390

Series: Key Engineering Materials, Volume 508

Selected, peer reviewed papers from the International Symposium of GCOE: Materials Integration in Conjunction with the 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011), KINKEN-WAKATE 2011, December 1-2, 2011, Sendai, Japan

This special volume on Materials Integration is based upon peer-reviewed papers selected from those presented at the International Symposium on the Global COE program, in conjunction with the 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011) and the 8th Materials Science School for Young Scientists, Institute for Materials Research, Tohoku University (Kinken-Wakate 2011). This volume covered the principal research fields of (i) Infrastructural and Bio- materials, (ii) Electronic materials, (iii) Energy and Environmental materials and (iv) Basic materials science. Materials integration is expected to produce a synergistic effect and permit the development and production of non-conventional materials exhibiting new functionalities.

Review from Book News Inc.: Though well known figures are brought in to deliver keynote addresses, the main emphasis of the symposium is to encourage young materials scientists to think and act across scientific disciplines. The 66 papers here, selected by peer review, look at infrastructure and bio-materials, electronic materials, energy and environmental materials, and basic materials science. Among the topics are the thermal conductivity design and evaluation of zirconium phosphate bonded silicon nitride porous ceramics, carbon nanomaterials for drug delivery, continuous dynamic recrystallization during the warm deformation of tempered lath martensite in a medium carbon steel, a comprehensive approach for constructing new material for electronic multipliers, and a computer simulation model for composite materials reinforced by multi-sized spherical particles.

Table of Contents (66 papers, 10 per page listed)

Effect of Precursor Supply on (100) and (001) Orientations of a-Al2O3 Film Prepared by Laser CVD
Kadokura Hokuto, Akihiko Ito, Teiichi Kimura, Takashi Goto

Thin-Film Compositions on Base of Hafnium Dioxide and Aluminum Oxide: Synthesis and Characterization
M.S. Lebedev

Preparation of SiNOf/BN High Temperature Wave-Transparent Composites by Precursor Infiltration and Pyrolysis Method
Feng Cao, Zhen Yu Fang, Fei Chen, Chang Rui Zhang, Qiang Shen, Si Qing Wang, Bin Li

Preparation of SiAlON-cBN Composites Using Ni Nanoparticle Precipitated cBN Powders
Jian Feng Zhang, Rong Tu, Takashi Goto

Thermal Conductivity Design and Evaluation of Zirconium Phosphate Bonded Silicon Nitride Porous Ceramics
Jun Yan Wu, Fei Chen, Ming Zhong Li, Qiang Shen, Lian Meng Zhang

Preparation of Nano-Sized ZrO2 Powders by Polyvinyl Alcohol-Gel Method
Xiao Li Ji, Guo Min Li, Hao Wang, Wei Wei Wan

Effect of Heating Rate on the Synthesis and Sintering of Ternary Carbide Zr2Al3C4 through Spark Plasma Sintering
Lian Meng Zhang, Qi Long Guo, Jun Guo Li, Qiang Shen

Densification and Microstructure of Monolithic TiN and TiB2 Fabricated by Spark Plasma Sintering
Mettaya Kitiwan, Akihiko Ito, Takashi Goto

Thermo-Mechanical Analysis of Si3N4-Based Seal Coatings on Si3N4 Substrate
Shan Liu, Fei Chen, Ying Yang, Qiang Shen, Kai Peng Zhang

Interface Reaction Behavior between Mn and SiO2 Formed by RF Sputter Deposition
Byeong Taek Bae, Hideaki Nakano, Junichi Koike

Phase Transformation and Densification of hBN-TiN Composites Fabrication by Spark Plasma Sintering
Mettaya Kitiwan, Akihiko Ito, Takashi Goto

Formation of Mo2S3 Layers on the Surface of Graphitic Platelets
V.O. Koroteev, A.V. Okotrub, Y.V. Shubin, L.G. Bulusheva

Foaming of CNTs/PMMA Nanocomposite with Supercritical Carbon Dioxide
Yuan Lu Xiong, Qiang Shen, Huan Yuan, Fei Chen, Guo Qiang Luo

Silicon Carbide Coating on Diamond Powder by Rotary Chemical Vapor Deposition
Hirokazu Katsui, Zhen Hua He, Takashi Goto

Mechanical Properties of Silicon Nitride Porous Ceramics with Bimodal Porosity
Fei Chen, Qiang Shen, Lian Meng Zhang

Carbon Nanomaterials for Drug Delivery
Mitali Kakran, Lin Li

Investigation of a Tb-Doped HfO2 Single Crystal Grown by a Skull Melting Method
Shunsuke Kurosawa, Yoshisuke Futami, Vladimir V. Kochurikhin, Mikhail A. Borik, Yuui Yokota, Takayuki Yanagida, Akira Yoshikawa

Surface Modification of Micro/Nano-Fabricated Filters
Majid Ebrahimi Warkiani, Hai Qing Gong, Anthony Fane

New Fe-B-P-Cu Nanocrystalline Soft Magnetic Alloys with High Js Combined with Low Coercivity Hc
Ze Qiang Zhang, Parmanand Sharma, Akihiro Makino

Evaluation of Texture Developed in High-Temperature ß-Phase during Friction Stir Welding of Ti-6Al-4V
Sergey Mironov, Yutaka S. Sato, Hiroyuki Kok

The Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic Glass
Xue Li, Yan Zhang, Hidemi Kato, Akihiro Makino, Akihisa Inoue

Young's Modulus Changeable ß-Type Binary Ti-Cr Alloys for Spinal Fixation Applications
Xing Feng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda

Continuous Dynamic Recrystallization during Warm Deformation of Tempered Lath Martensite in a Medium Carbon Steel
Un Hae Lee, Naoya Kamikawa, Goro Miyamoto, Tadashi Furuhara

Effect of Phosphorus on Microstructure, Mechanical Properties, and Formation of Retained Austenite in TRIP Steels
Eui Pyo Kwon, Shun Fujieda, Kozo Shinoda, Shigeru Suzuki

Fabrication of Nanocrystalline Fe84.3Si4B8P3Cu0.7 Powders with High Magnetization
Yan Zhang, Yu Ren Wen, Akihiro Makino

Dynamic Strain Aging in Biomedical Co–Cr–Mo-Based Alloys with Nitrogen Doping
Kenta Yamanaka, Manami Mori, Yun Ping Li, Yuichiro Koizumi, Akihiko Chiba

Local Atomic Arrangement of Amorphous Zr50Ni50 Alloy Analyzed by AXS-RMC Method
T. Kawamata, Yoshihiko Yokoyama, Kazumasa Sugiyama

Microstructure and Mechanical Properties of a Biomedical ß-Type Titanium Alloy Subjected to Severe Plastic Deformation after Aging Treatment
H. Yilmazer, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, T. Akahori, Y. Todaka

Difference of Microstructure and Fatigue Properties between Forged and Rolled Ti-6Al-4V
Yoon Seok Lee, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Takashi Maeda, Yoshihisa Shirai, Ikuhiro Inagaki

Microstructural Change of ß' Phase and Hardness Change in As-Solutionized Dental Ag-20Pd-12Au-14.5Cu Alloy
Yong Hwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Hisao Fukui

Effect of Microalloying Elements on Solidification Microstructure of the La(Fe0.89Si0.11)13 Alloy
Kodai Niitsu, Ryosuke Kainuma

Study on Microstructure and Property of Diffusion-Bonded Mo-Cu Joints
Jian Zhang, Guo Qiang Luo, Mei Juan Li, Qiang Shen, Lian Meng Zhang

Growth of b-Axis-Oriented BaTi2O5 Nanopillars by Laser Chemical Vapor Deposition
Dong Yun Guo, Akihiko Ito, Rong Tu, Takashi Goto

Deposition of BaTi2O5 Films on Si Substrates by Using MgO Buffers
L. Li, Chuan Bin Wang, Qiang Shen, Lian Meng Zhang

Effect of Nitridation on Indium-Composition of InGaN Films
Jung Hun Choi, Suresh Kumar, Shi Yang Ji, Shojiki Kanako, Takashi Hanada, Ryuji Katayama, Takashi Matsuoka

Ba2TiO4 and Ba4Ti13O30 Thick Films Prepared by Laser Chemical Vapor Deposition and their Microstructure
Dong Yun Guo, Akihiko Ito, Rong Tu, Takashi Goto

Search for New Superconductors by Soft-Chemical Techniques
Masatsune Kato, Tomohisa Takamatsu, Hotaka Yagyu, Takashi Noji, Yoji Koike

Preparation of c-Axis-Oriented Y2Ba4Cu7O15-d Films by Laser CVD with Ultrasonically Nebulized Precursor
Akihiko Ito, Mitsutaka Sato, Takashi Goto

Effect of Sb2O3 Doping Ratio on Electrical and Optical Properties of ATO Films by Pulsed Laser Deposition
Na Li, Fei Chen, Qiang Shen, Chuan Bin Wang, Lian Meng Zhang

Comprehensive Approach for the Construction of New Material for Electronic Multipliers
E.S. Vikulova, K.V. Zherikova, L.N. Zelenina, T.P. Chusova, S.V. Sysoev, V. Shevtsov, A.P. Zubareva, N.B. Morozova, I.K. Igumenov

Growth of Heavily Indium Doped Si Crystals by Co-Doping of Neutral Impurity Carbon or Germanium
Kaihei Inoue, Yuki Tokumoto, Kentaro Kutsukake, Yutaka Ohno, Ichiro Yonenaga

Nd3+ Doped LiCaAIF6 Single Crystal for Scintillator Application
Takayuki Yanagida, Yoshisuke Futami, Noriaki Kawaguchi, Jan Pejchal, Yutaka Fujimoto, Shunsuke Kurosawa, Yuui Yokota, Akira Yoshikawa

Densification of ATO Nanoceramics by Spark Plasma Sintering
Xue Ping Li, Fei Chen, Qiang Shen, An Xue Wang, Lian Meng Zhang

Optical and Scintillation Properties of Eu-Doped Calcium Orthoborate
Yutaka Fujimoto, Yoshisuke Futami, Takayuki Yanagida, Shunsuke Kurosawa, N. Kawaguchi, K. Fukuda, D. Totsuka, Akira Yoshikawa

Crystal Growth and Scintillation Properties of Ce3+ and Mg2+ Co-Doped LiCaAlF6 Single Crystal
Akihiro Yamaji, Yutaka Fujimoto, Takayuki Yanagida, N. Kawaguchi, Yoshisuke Futami, Yuui Yokota, Akira Yoshikawa

Study on Phase Diagram of Ca3NbGa3Si2O14 Piezoelectric Material by Differential Thermal Analysis and X-Ray Diffraction Measurement
Yoshisuke Futami, Yuui Yokota, Masato Sato, Kazushige Tota, Jan Pejchal, Takayuki Yanagida, Ko Onodera, Akira Yoshikawa

Preparation of Bi3.6Ho0.4Ti3O12 Ceramics by Hot-Press Sintering
Chuan Bin Wang, L. Fu, Qiang Shen, Lian Meng Zhang

Proton Dynamics in Water Nanotube of New Molecular Porous Crystal
H. Matsui, M. Tadokoro

Ferromagnetic Resonance Study on FePt Thin Films with In-Plane Magnetization Using Coplanar Waveguide
J. G. Kang, M. Mizuguchi, K. Takanashi

Spin Pumping in a Ferromagnetic/Nonmagnetic/Spin-Sink Trilayer Film: Spin Current Termination
K. Harii, Z. Qiu, T. Iwashita, Y. Kajiwara, K. Uchida, K. Ando, T. An, Y. Fujikawa, E. Saitoh

Studies on Properties of Epoxy Resin Base Piezoelectricity Damping Carbon Fiber Composite Materials
Yan Qin, Shi Wei Zhao, Bi Fang Dai, Qi Lin Mei, Zhi Xiong Huang

Preparation of Titania Solid Films by Laser CVD Using CO2 Laser
Ming Gao, Akihiko Ito, Rong Tu, Takashi Goto

Physical Properties of the SiCxNyHz Films
V.R. Shayapov, M. Rumyantsev, N.I. Fainer, B.M. Ayupov

Microcolumnar and Granular Structures of TiO2 Films Prepared by Laser CVD Using Nd:YAG Laser
Ming Gao, Akihiko Ito, Rong Tu, Takashi Goto

Ionic Conductivity and Crystal Structure of TM-Doped Mg0.5Ti2(PO4)3 (TM = Fe, Mn, Co and Nb)
Hiroo Takahashia, Hitoshi Takamura

Orientation and Morphology of LiCoO2 Prepared by Chemical Vapor Deposition on Al2O3 Single Crystal
Hirokazu Katsui, Yamashita Yuji, Takashi Goto

Environmental Structural Analysis of Raney Ru(Ni) Fine Particles
Reiko Murao, Kazumasa Sugiyama, Satoshi Kameoka, An Pang Tsai

Synthesis and Structural Investigation of Metal Hydride, Y(Mn1-xFex)2Hy (x = 0.3, 4.0 = y = 4.5) and Complex Hydride, Y(Mn1-xFex)2H6
Mika Kano, Takashi Ito, Motoaki Matsuo, Shigeyuki Takagi, Satoshi Semboshi, Shinichi Orimo

Charging and Discharging Phenomena in Organic Photoconductors Observed Using Electron Holography
K. Takahashi, Y. Murakami, Daisuke Shindo

Tantalum Vacancy Effects on Electrical Conductivity of La3Ta0.5Ga5.5O14 and Ba-Based P321 Crystals
Chan Yeup Chung, Ritsuko Yaokawa, Hiroshi Mizuseki, Yoshiyuki Kawazoe

Emission Characteristics of Copper Ionic Lines from the 3d95s-3d94p Transition in a Low-Pressure Laser-Induced Plasma
Lei Zhang, Kashiwakura Shunsuke, Kazuaki Wagatsuma

Optical Conductivity of Rattling Phonons in Type-I Clathrates Ba8Ga16Ge30 and Ba8Ga16Sn30
K. Iwamoto, T. Mori, S. Kushibiki, H. Honda, H. Matsumoto, K. Suekuni, M.A. Avila, T. Takabatake, N. Toyota

Suppression of Spin Pumping in the Presence of Thin Titanium Interlayer
H. Nakayama, T. Tashiro, R. Takahashi, Y. Kajiwara, T. Ohtani, K. Ando, R. Iguchi, K. Uchida, T. Yoshino, E. Saitoh

Features of the Mackay Clusters with and without a Center Atom in Al Based Approximants of Icosahedral Quasicrystals
Shota Suzuki, Rayko Simura, Kazumasa Sugiyama

Dislocation Dynamics in Bending Deformation of Si
Ichiro Yonenaga, Kazuo Nakajima

Computer Simulation Model for Multi-Size Spherical Particles Reinforced Composite Materials
Zhuo Chen, Zhi Xiong Huang, Rong Yang Dou, Jing Dai, Min Xian Shi, Jia You Ji

Product Samples

A sample for this product is available. Please Login/Register to download this sample.

Customers who bought this item also bought

• Advanced Engineering Ceramics and Composites
• Micro-Nano Technology XIII
• Green Building Materials III
• Anti-Fatigue Design and Manufacturing Technologies I
• Ecological Environment and Technology of Concrete
• Advances in Material Engineering and Mechanical Engineering
• Powder Metallurgy of Titanium
• Engineering Materials V
• Electroceramics in Japan XIV
• Advances in Intelligent Transportation System and Technology