-
Hard Copy (Paper Back)
-
CD ROM
-
Electronic (PDF)
Diffusion in Solids and Liquids VII
Trans Tech Publications Inc, August 2012, Pages: 760
Series: Defect and Diffusion Forum, Volumes 326 - 328
Selected, peer reviewed papers from the 7th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure & Properties - Nanodiffusion and Nanostructured Materials (DSL 2011), June 26 – 30, 2011, Algarve, Portugal
This special issue of Defect and Diffusion Forum contains selected refereed papers which were presented at the 7th International Conference on Diffusion in Solids and Liquids (DSL-2011) held on the 26 to 30th June 2011 at the Hilton Vilamoura, Algarve, Portugal. The goal of the conference was to provide a unique opportunity to exchange information, to present the latest results and review burning issues in contemporary diffusion research. Young scientists were especially encouraged to attend the conference and to establish international links with established scientists.
Table of Contents (124 papers, 10 per page listed)
The Beauty of the Different Views on Diffusion
Jörg Kärger
Fabrication and Properties of Sn-3.5Ag-XCu Solder by Ball Milling and Paste Mixing
Aemi Nadia, A.S.M.A. Haseeb
Mass Transport Mechanism in the Retina of the Human Eye
Humberto Dória Silva, Luiz Cláudio Pereira Dória, Cristiana Pereira Dória, Cristiane Pereira Dória, Maria do Carmo Tatiana Dória Silva, Humberto Dória Silva Júnior, M.T. Dória Silva
Evaluation of Commercial Adsorbents for Removal of Biuret in Urea Solution for Automotive Applications
G.V. Estrela, W.C. Souza, G.V. Azevedo, H.L. Corrêa, M.A.G. Figueiredo
Evaluation of the Use of Solids Waste Generated in the Activities of Exploration as Adsorbents for Treatment of Oil Derivatives
W.C. Souza, J.P.M. Miguens, H.L. Corrêa, M.A.G. Figueiredo
Electrochemical Behavior and Thickness of Aluminium Oxide Films Studied by EIS: Laboratory and Field Studies
Khaled Habib, K. Al-Muhanna, F. Al-Sabti, A. Al-Arbeed
Back Diffusion during Zone Melting of Metallurgical Silicon
Paulo Roberto Mei, S.P. Moreira, A.D.S. Côrtes, D.S. Silva, F.C. Marques
Numerical Simulation of Rising Damp Phenomenon
A.S. Guimarães, J.M.P.Q. Delgado, V.P. de Freitas
Characterization of a Hygro-Regulated Wall Base Ventilation System for Treatment of Rising Damp
A.S. Guimarães, J.M.P.Q. Delgado, V.P. de Freitas
Influence of Thermal Treatment on the Heat Transfer of 10GN2MFA Steel
David Seidl, Pavel Koštial, Petr Jonšta, Zora Jancíková, Ivan Ružiak
Exploitation of Artificial Intelligence Methods for Prediction of Atmospheric Corrosion
David Seidl, Zora Jancíková, Pavel Koštial, Ivan Ružiak, Ivan Kopal, Katerina Kreislová
The Influence of Carbon Fillers on Thermal Transport in Polyurethane
Pavel Koštial, Zora Jancíková, Vítezslav Stýskala, Marián Kubliha, Rudolf Madaj, Ivan Ružiak, Jana Dedicová, Rudolf Hrehuš, Petr Jonšta
Slow Crystallization of Al-Sc Alloys: Growth of Spherical Intermetallic Particles
A.B. Shubin, E. A. Popova, K.Y. Shunyaev, E.A. Pastukhov
Novel Arrangement of Rough Tubes for Heat Flux Improvement
Farshad Farahbod, Sara Farahmand, Farzaneh Farahbod
Estimation of Li-Ion Diffusion Coefficients in C60 Coated Si Thin Film Anodes Using Electrochemical Techniques
Arenst Andreas Arie, Joong Kee Lee
Synthesis and Characterization of the Gold-SiO2 Core-Shell Nanoparticle on the X-Nanozeoliate Used for Immobilization of the Alkaline Protease Enzyme
Nazanin Farhadyar, Mirabdullah Seyed Sadjadi
The Kinetic Monte Carlo Simulations of the Self-Diffusivity in Zeolites
A. Tarasenko, Lubomir Jastrabík
Comparison of Elastic Constant for Borassus flabellifier in the Longitudinal and Perpendicular Direction of Fibres with Frequency
Sushil Phadke, B.D. Shrivastava, Ashutosh Mishra, N. Dagaonkar
The Principles of Processing Siderite Ores with a High Magnesium Oxide Content
S. Klochkovskii, A. Smirnov
Closed Form Solutions to Nonlinear Heat Conduction Problems
J. Zabadal, R. Garcia, V. Ribeiro, F. Van Der
Three-Dimensional Diffusion in Arbitrary Domain Using Generalized Coordinates for the Boundary Condition of the First Kind: Application in Drying
V.S. Oliveira Farias, Wilton Pereira da Silva, C.M.D.P. Silva e Silva, Antônio Gilson Barbosa de Lima
Thermodynamics of Defect Formation and Hydration of Y2O3
L.P. Putilov, V.I. Tsidilkovski, A.N. Varaksin, A.Ya. Fishman
Prediction of Effective Heat Storage Coefficient of Multi-Phase Materials
R.S. Beniwal, Manju Dabas, Ramvir Singh
Effect of TiC Particles Volume Fraction on the Mutual Diffusion of Al and Mg during Fabrication of Al-4.5wt%Mg/TiC via Mechanical Alloying Process
O. Ozhdelnia, Ali Shokuhfar
Phase Transformation and Thermoelectric Properties of In0.25Co4-xNixSb12 Skutterudites
Il Ho Kim
Improvement of Surface Quality and Parts Functional Ability by Vibro-Mechanical Consolidation Treatment and Finishing
Mohamed Amine Djema, Khaled Hamouda, Anatoly Babichev, Djamel Saidi, Tahar Sayah, Mohamed Nadjib Benallal
Applying Computational Analysis in Studies of Resin Transfer Moulding
F. Ferreira Luz, S. Campos Amico, A. Lima Cunha, E.Santos Barbosa, Antônio Gilson Barbosa de Lima
Mass Transfer of God Particle or Higgs Boson
R. Leticia Corral-Bustamante, Aarón Raúl Rodríguez-Corral, G. Irigoyen-Chávez, A. Heiras-Torres
Study of Diffusion and Water Vapor Permeability in Chitosan Films and Chitosan Emulsified Films
Arlete Barbosa dos Reis, Cristiana Maria Pedroso Yoshida, Vera Solange Oliveira Farias, Wilton Pereira da Silva
The Meshfree Finite Element Method for Fluids with Large Deformations
Mohsen Darbani
Two-Phase Flow (Oil-Water) in Petroleum Reservoir with Irregular Geometry Including Water Injection: Effect of Porosity on the Oil Recovery Factor
F. Alves Batista, B. Gonçalves Coutinho, S.R. Farias Neto, Antônio Gilson Barbosa de Lima
Failure Analysis of an Automotive Component (Cardan Yoke) by Scanning Electron Microscopy
Antonio Augusto Couto, A.H.P. Andrade, Danieli A.P. Reis, J. Vatavuk
Effect of Artificial Aging on the Mechanical Properties of an Aerospace Aluminum Alloy 2024
Danieli A.P. Reis, Antonio Augusto Couto, N.I. Domingues Jr., Ana Cláudia Hirschmann, S. Zepka, Carlos de Moura Neto
Mass Transfer in Irregularly-Shaped Solid: An Exact Solution Using the Galerkin-Based Integral Method
I. Batista dos Santos, L.P. de Lucena Silva, Antônio Gilson Barbosa de Lima
Study and Interpretation of the Mass Transfer Phenomena through Textile Structures in the Wet State
Maria José Geraldes, C. Monteiro, Lubos Hes
Relations between Diffusion Paths and Interdiffusion Coefficients in the Ternary System Fe-Co-Ni
J. Priimets, Ü. Ugaste
Phases in Austenitic Cast Steel
Malgorzata Garbiak, Bogdan Piekarski
Numerical Modeling of Two Phase Flow under Centrifugation
Jozef Kacur, Benny Malengier, Pavol Kišon
Thermal Properties of CuGa2 Phase in Inert Atmosphere
T.V. Kulikova, V.A. Bykov, K.Y. Shunyaev, A.B. Shubin
Temperature Dependence of Elastic Properties of Aluminum Foam Structures
Seyed Mohammad Hossein Hosseini, Abdolreza Kharaghani, Christoph Kirsch, Andreas Öchsner
Synthesis of ZnS/SiO2 Core-Shell by Sol-Gel Process and Covering then with Gold Nanoparticle and Study of its Photoluminescence Properties
Mirabdullah Seyed Sadjadi, Nazanin Farhadyar, K. Zare
Silicon Carbide Solid-Phase Epitaxy on a Microporous Substratum
Galina I. Zmievskaya, Anna L. Bondareva, V.V. Savchenko, Tatiana V. Levchenko
The Thermal Diffusivity of Mg-Al-Sr and Mg-Al-Ca-Sr Sand Casting Magnesium Alloys
Andrzej Kielbus, Tomasz Rzychon, Grzegorz Moskal
The Corrosion Resistance of the Mg-Al-Ca-Sr Sand Casting Magnesium Alloys
Andrzej Kielbus, Tomasz Rzychon, Joanna Michalska, Michal Stopyra
Determination of Pressure-Saturation-Permeability Relations by Centrifugation
Jozef Kacur, Hana Budácová
Heat and Mass Transfer and Volume Variations during Drying of Industrial Ceramic Bricks: An Experimental Investigation
J. Barbosa da Silva, G. Silva Almeida, Gelmires de Araújo Neves, W.C.P. Barbosa de Lima, S.R. Farias Neto, Antônio Gilson Barbosa de Lima
Hot Corrosion Resistance Properties of Al-Si Coatings Obtained by Slurry Method
Agnieszka Kochmanska
Spatial Variation of Longitudinal Dispersion in LECA-Based Vegetated Beds
António Albuquerque
Characterisation of C-B-N Diffusion Layers Developed on High-Speed Steel Substrate
Alexander S. Chaus, Lubomír Caplovic, Y. A. Chaus, J. Sojka
Structure and Properties of Gas Nitrided Layers on Nanoflex Stainless Steel
Pawel Kochmanski, Jolanta Baranowsk
The Influence of Chemical Composition of Stainless Steel on the Formation of Low Temperature Nitrided Layer
Jolanta Baranowska, Pawel Kochmanski, Jaroslaw Bielawski
Recrystallization Microstructure after Annealing inside Magnetic Field
C.M.B. Bacaltchuk, G.A. Castello-Branco, J.N. Müller, L.P.M. Brandão, Hamid Garmestani
A Comparison of Thermal Dispersion Behaviour in High-Conductivity Porous Media of Various Pore Geometries
Christopher T. DeGroot, Anthony G. Straatman
Contaminant Transport in Partially Saturated Porous Media
E. Trojáková, J. Babušíková
Experimental Analysis of the Infrared Thermography for the Thermal Characterization of a Building Envelope
G. Ferreira, A. Aranda, M.D. Mainar-Toledo, D. Zambrana
Surface Quality Control of Materials Being Cut by Laser with Respect to Corrosion Resistance
Jan Valícek, Marta Harnicárová, Róbert Cep, Krzysztof Rokosz, Czeslaw Lukianowicz, Dražan Kozak, Michal Zelenák, Pavel Koštial
Emission Distribution and Regulation of Local Heat Source
Jan Valícek, Jana Müllerová, Vlastimil Kubena, Pavel Koštial, Marta Harnicárová, Marian Mikulík
Microstructure and Mechanical Properties Evaluations of Heat Treated Dissimilar Metal Joint Weldment between API 5CT C90 and ASTM A182 F22
Mokhtar Awang, Mohd Hafiz Othman, Ku Zilati Ku Shaari, Mohd Noorfahmi Wichi
Enhancement of Heat Transfer over Spatial Stationary and Moving Sinusoidal Wavy Wall: A Numerical Analysis
Prashant Kumar, Frédéric Topin, Lounes Tadrist
Effect of Austenitising Temperature on Structural Changes in Modified High-Speed Steel of AISI M2 Type
Alexander S. Chaus, Matej Beznák, M. Bohacík, Ján Porubský, P. Úradník
Investigations on Tensile Properties of Waste Fillers Reinforced Composites
Mehmet Safa Bodur, Turgut Gülmez, Ayhan Durademir
Mass Transfer of Organic Substances in Supercritical Carbon Dioxide
Miao Hu, Rainer Benning, Özgür Ertunc, Antonio Delgado, Vanusch Nercissian, Andreas Berger
Energy-Flow Methodology for Thermodynamic Analysis of Manufacturing Processes: A Case Study of Welding Processes
D. Zambrana, A. Aranda, G. Ferreira, F. Barrio
CuO Nanoparticles: A Mild and Efficient Reusable Catalyst for the One-Pot Synthesis of 4-amino-5-pyrimidinecarbonitriles under Aqueous Conditions
Seyed Javad Ahmadi, Sodeh Sadjadi, Morteza Hosseinpour
Effect of Salt Bath Composition on the Chromium Diffusion on Plain Carbon Steels by TRD Process
A. Ghadi, Mansour Soltanieh, H.R. Karimi Zarchi
Effect of Structure on the Electrochemical Oxidation Rate of Copper and Nickel Sulfides
O.V. Nechvoglod, E.N. Selivanov, S.V. Mamyachenkov
The Increased Flow of a Railway Line by Repositioning of a Minimum Number of Axes Halts
H. Siguerdjidjene, I.V. Turbine, D. Saidi
Characterization of Pt-Doped WO3 Nanoparticles Synthesized by Flame Spray Pyrolysis
Thanittha Samerjai, Nittaya Tamaekong, Sukon Phanichphant
Assessment of Heat Affected Zone of Submerged Arc Welding Process through Digital Image Processing
Aniruddha Ghosh, Somnath Chattopadhyaya, N.K. Singh
Prediction of Weld Bead Parameters, Transient Temperature Distribution & HAZ Width of Submerged Arc Welded Structural Steel Plates
Aniruddha Ghosh, Somnath Chattopadhyaya, N.K. Singh
Dispersion in Metal Foam: A Pore Scale Numerical Study
Jean Michel Hugo, Frédéric Topin
CFD Simulation of Coaxial Jet Mixer Using RANS Turbulent Models
Ku Zilati Ku Shaari, Afiq Mohd Laziz, Kerstin Heinen, Mokhtar Awang, Suriati Sufian, Shuhaimi Mahadzir
Rheology Assessment of PSf/ NMP Solution and its Influence on Membrane Structure
Priscila Anadão, Rafael Rezende Montes, Henrique Souza de Santis, Hélio Wiebeck
Experimental Evaluation and Simulation of Al/Si Diffusion in Hot Dipped Fe-Si Steels
I. Infante Danzo, Benny Malengier, S. Miyar, E. Gomez, Kim Verbeken, Yvan Houbaert, Roger Van Keer, Iris de Graeve
Solid Skin Characterization of PMMA/MAM Foams Fabricated by Gas Dissolution Foaming over a Range of Pressures
Javier Pinto, Samuel Pardo, E. Solórzano, Miguel A. Rodríguez-Pérez, M. Dumon, Jose A. de Saja
Heat Transfer Enhancement Using Cu-Water Nanofluid in an Enclosure with Moving Cold Sidewalls
Ghanbar Ali Sheikhzadeh, M. Tavakoli, H. Alizadeh
Phase Field Simulation of the Collapse of the Rafted Structure in Ni-Based Superalloys
Toshiya Tanimoto, Yuhki Tsukada, Yoshinori Murata, Toshiyuki Koyama
Measurement of the Molecular Mass Dependence of the Mass Diffusion Coefficient in Protein Aqueous Solutions
Juan F. Torres, Atsuki Komiya, Junnosuke Okajima, Maruyama Shigenao
Diffusivity of Hydrogen in ZnO Single Crystal
Jakub Cížek, František Lukác, Marián Vlcek, Ivan Procházka, Franziska Traeger, Detlef Rogalla, Hans Werner Becker
Metal-Ceramic Composite Foams and their Fire Resistance
Janusz Grabi
Crystallisation of Silicon on Reinforcement Fibres as a Consequence of Overheating of Matrix Metal during Saturation in MMC
Katarzyna Gawdzinska, Dorota Nagolska, Janusz Grabian
Microstructure and Thermal Analysis of Mg-Al-Ca-Sr Alloys
Tomasz Rzychon
Effect of Thermal Contact Resistance on Alumina Molten Particle Impacting onto a Metal Substrate
S. Oukach, Bernard Pateyron, H. Hamdi, M. El Ganaoui
An Attempt to Apply Darcy's Flow Law in MMC Recycling Process Analysis
Dorota Nagolska, Katarzyna Gawdzinska
Characteristics and Wear Performance of Nitrided Ti6Al4V
Farid Siyahjani, Huseyin Cimenoglu
Fluoride Influence on the Properties of Oxide Layer Produced by Plasma Electrolytic Oxidation
Barbara Kazanski, Alexei Kossenko, Alex Lugovskoy, Michael Zinigrad
Modifying the Sorption Capacity of Biopolymers by the Mechanochemical Activation
Svetlana Lugovskoy, Michael Zinigrad, Moshe Eliaszade
Creep Behavior of the Inconel 718 Superalloy
Tarcila Sugahara, Karina Martinolli, Danieli A.P. Reis, Carlos de Moura Neto, Antonio Augusto Couto, F. Piorino Neto, M.J.R. Barboza
Modeling Analyze from Titanium Alloy
N.M. Guimarães, Danieli A.P. Reis, Carlos de Moura Neto, G.C. Coelho, Antonio Augusto Couto
Determination of Creep Parameters of Ti-6Al-4V with Bimodal and Equiaxed Microstructure
L.A.N.S. Briguente, Antonio Augusto Couto, N.M. Guimarães, Danieli A.P. Reis, Carlos de Moura Neto, M.J.R. Barboz
Evaluation of Inconel 718 Creep Behavior
Karina Martinolli, Tarcila Sugahara, Danieli A.P. Reis, Carlos de Moura Neto, Ana Cláudia Hirschmann, Antonio Augusto Couto
The Analysis of Heat Transfer and Thermal Stresses in Thermal Barrier Coatings under Exploitation
Tomasz Sadowski, Przemyslaw Golewski
Lattice Boltzmann Analysis of the Heat Transfer in Cubical Enclosures
Djamel Eddine Ameziani, Rachid Benacer, Mohamed Belmedani, Abdelkader Boutraa
Numerical Simulation of Diffusive Processes in Heated Cylinder Using the Finite Volume and Finite Difference Methods
M.D. de Campos, E.C. Romão, L.F. Mendes de Moura
Influence of Casting Conditions and Alloy Additions on the Zn22Al2Cu Structure
Rafal Michalik, A. Tomaszewska, H. Woznica
Structure and Corrosion Resistance of Cast ZnAl40Cu2 Alloy
Rafal Michalik, H. Woznica
Heat-Mass Transfer and Related Microstructures in TiAl-Based Alloys Directionally Solidifying in the Earth Gravity and Microgravity
A.V. Kartavykh, V.P. Ginkin, S. Ganina, S. Rex, Ulrike Hecht, D. Voss
Measurement of the Transverse Diffusion Coefficient of Charge in Liquid Xenon
W. T. Chen, H. Carduner, J. P. Cussonneau, J. Donnard, S. Duval, A. F. Mohamad-Hadi, J. Lamblin, O. Lemaire, P. Le Ray, E. Morteau, T. Oger, L. Scotto-
Lavina, J. S. Stutzmann, D. Thers
Study of Phase Transformation in Alloys of the Al-Fe System
Magdalena Jablonska, Marta Mikuskiewicz, A. Smiglewicz, E. Bernstock-Kopaczynska
Evaluation of the System Free Energy in FG-HAZ of Mod.9Cr-1Mo Steel for Nuclear Power Plants
Mitsunao Iwata, Yuichi Sugiyama, Yoshinori Murata, Shigeru Takay
Effect of Manganese on Titanium Thin Films Adhesion Deposited on Steel Substrates
R. Gheriani, Raouf Mechiakh
Thermal Expansion of Alloys from the Al-Fe System
A. Smiglewicz, Magdalena Jablonska
Development of Nonlinear Analytical Models for the Study of Heat/Mass Transfer Properties in the Drying of Porous Type Fabric
Ralph W.L. Ip, Elvis Iok Cheong Wan
Comparison of Two Models for Simulation of Binary Alloy Solidification
S. Ganina, Olga Budenkova, V.P. Ginkin, B. Saadi, L. Hachani, Yves Fautrelle
Application of Simplified Inverse Solution to Estimate the Thermo-Physical Parameters of Granular Porous Materials Bonded by Different Resins
Zenon Ignaszak, Pawel Popielarski
Problem of Acceptability of Internal Porosity in Semi-Finished Cast Product as New Trend "Tolerance of Damage" Present in Modern Design Office
Zenon Ignaszak, Pawel Popielarski, Jakub Hajkowski, J.B. Prunier
The Effect of Hydrogen on Pitting Corrosion of Superaustenitic and Austenitic-Ferritic Stainless Steels
Joanna Michalska
Flow Controllability of Hydrogen Diffusion Driven by Local Stress Field for Steel under Cyclic Loading Condition
Toshihito Ohmi, A.Toshimitsu Yokobori Jr., Kenichi Takei
Analysis of Stress Induced Voiding Using by Finite Element Analysis Coupled with Finite Difference Analysis
Haruhisa Shigeyama, A. Toshimitsu Yokobori Jr., Toshihito Ohmi, Takenao Nemoto
Exergetic Analyses of a Particular Absorption Cooling System
Nahla Bouaziz, D. Lounissi, Lakdar Kairouani, M. El Ganaoui
Effect of Synthesis Duration on the Physicochemical Properties of Siliceous Mesoporous Molecular Sieve (Si-MMS)
Anita Ramli, Sohail Ahmed, Suzana Yusup
Effect of Frequency on Hydrocarbon (HC) Detection Using 3D Finite Integral Modeling
Hanita Daud, Majid Niaz Akhtar, Noorhana Binti Yahya, Nadeem Nasir, Hasan Soleimani
Drying Kinetics of External Thermal Insulation Composite Systems (ETICS)
E. Barreira, J.M.P.Q. Delgado, N.M.M. Ramos, V.P. de Freitas
The Effect of Shading Devices in Rising Damp Phenomenon of Historical Buildings
J.M.P.Q. Delgado, A.S. Guimarães, V.P. de Freitas
Structure, Thermal Stability and Properties of Grain Boundaries of Submicrocrystalline Mo Obtained by Severe Plastic Deformation
Vladimir V. Popov, G. P. Grabovetskaya, A.V. Sergeev, I.P. Mishin
Quantum Dots Based Optical Sensors
Aleksandra Lobnik, Špela Korent Urek, Matejka Turel
Characterising the Differences between the Adsorption and Desorption Processes in a Desiccant Layer by Detailed Numerical Modelling
C.R. Ruivo, J.J. Costa, A.R. Figueiredo
Diffusion of Oxygen and Nitrogen in the Ti-15Mo Alloy Used for Biomedical Applications
José Roberto Severino Martins Júnior, Renata Abdallah Nogueira, Raul Oliveira de Araújo, Carlos Roberto Grandini
Oxygen Diffusion in Ti-20Mo Alloys, Used as Biomaterial, Measured by Mechanical Spectroscopy
Renata Abdallah Nogueira, Carlos Roberto Grandini
Diffusion of Interstitial Solutes in Nb-46wt% Ti Alloys Measured by Mechanical Spectroscopy
Carlos Roberto Grandini, Odila Florêncio, Walter José Botta Filho
Isotopic Exchange of Gaseous Oxygen with Mechanoactivated Manganese Oxides
A.Ya. Fishman, T.E. Kurennykh, E.V. Vykhodets, V.B. Vykhodets
Study of the Anelastic Behavior of PZT and PLZT Ferroelectric Ceramics
Odila Florêncio, Paulo Sergio da Silva Jr., José Antônio Eiras, Ducinei Garcia, Eriton Rodrigo Botero
Numerical Simulation of 2D Flow through a Packed Bed of Square Cylinders
P.J.S.A. Ferreira de Sousa, Isabel Malico, Gérson Fernandes
Hydrogen Mobility in the Non-Martensitically Transforming Shape Memory Alloy Ni52Ti48
Giovanni Mazzolai
Product Samples
A sample for this product is available. Please Login/Register to download this sample.
Customers who bought this item also bought
All rights reserved. © Copyright 2013 Research and Markets WWW5
Terms and Conditions Privacy Policy Publishers Employment Opportunities Site Map Link to us Webmaster Affiliate Network
