• SELECT SITE CURRENCY
Select a currency for use throughout the site
Magnesium Technology 2010. Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS
John Wiley and Sons Ltd, May 2010, Pages: 594
Magnesium Technology 2010 presents all aspects of magnesium production, properties and application, including primary production, alloy development, performance and the global market. This all-inclusive book contains sections on wrought alloys; thermodynamics and phase transformations; casting; alloy microstructure and properties; corrosion, surface finishing and joining; creep resistant magnesium alloys; and advanced magnesium materials.
About the Editor.
About the Organizers.
Magnesium Technology 2010.
Corrosion Resistance of Graphite Anode for Magnesium Electrolyzers (B. Li, J. Lou, C. Zhan, and J. Yu).
Magnesium Alloys in Aerospace Applications - Flammability Testing and Results (B. Gwynne).
A Possible Route to Making Magnesium Fit for Hydrogen Storage in Automotive Applications (V. Skripnyuk, E. Rabkin, Y. Estrin, and R. Lapovok).
Precipitation Strengthening in Magnesium Alloys Containing Rare Earth Elements (X. Zeng, W. Ding, Y. Wu, L. Peng, and A. Luo).
Thermodynamics and Constitution of Mg-Zn-Ce Alloys (C. Chiu, A. Kozlov, J. Groebner, and R. Schmid-Fetzer).
Magnesium Alloys in Army Applications: Past, Current and Future Solutions (S. Mathaudhu, and E. Nyberg).
Integrated Computational Materials Engineering (ICME) for Magnesium: An International Pilot Project (J. Allison, B. Liu, K. Boyle, L. Hector, and R. McCune).
Thermodynamic and Elastic Properties of La-X (X=Al,Mg) Intermetallic Compounds from First Principles Calculations (L. Hector, J. Wrobel, and K. Kurzydlowski).
Numerical Simulation of Direct Extrusion of Magnesium Alloys (W. Misiolek, and L. DePari).
Transmutation and Accommodation Effects by Glide Twinning (A. Oppedal, and H. ElKadiri).
Plasticity in a Rod-Textured Extruded Mg AM30 Alloy (Q. Ma, and H. ElKadiri).
Extracting Post-uniform Constitutive Behavior from High Temperature Tensile Test Data (C. Dreyer, L. Hector, and S. Agnew).
Strain Field Measurement during Bending of Extruded Magnesium Alloys (A. Ben-Artzy, L. Hector, and P. Krajewski).
Cyberinfrastructure for Integrated Computational Material Engineering (T. Haupt).
Primary Production and Flammability Issues.
The Magnesium Industry Today: A Global Perspective (G. Patzer).
Magnesium: Bridging Diverse Metal Markets (S. Slade).
Development of Recyclable Mg-Based Alloys (N. Reade, J. Sokolowski, A. Gesing, C. Blawert, D. Fechner, and N. Hort).
Preparation of Al-Mg Alloys from MgO by Molten Salt Electrolysis Method (S. Yang, F. Yang, X. Hu, Z. Wang, Z. Shi, and B. Gao).
Effect of KCl on Conductivity of BaF2-LiF-MgF2 Molten Salts (S. Yang, F. Yang, G. Wang, X. Hu, Z. Wang, Z. Shi, and B. Gao).
Powder Metallurgy of Magnesium: Is it Feasible? (P. Burke, and G. Kipouros).
Fireproof Evaluation of CaO added Mg-3Al, Mg-6Al, and Mg-9Al Mg Cast Products (J. Lee, and S. Kim).
Effect of Ca(OH)2 on Oxidation and Ignition Resistances of Pure Mg (D. Jang, and S. Kim).
Research on the Oxidation Behavior of AZ91D-based Magnesium Alloys (H. Luo).
Coatings and Corrosion.
A Novel Method for the Preparation of Electroless Coating on Magnesium Alloys (H. Zhao, Z. Huang, P. Li, and J. Cui).
Galvanic Corrosion and Stress Corrosion Cracking of Steel and Aluminum Bolts in Magnesium Die Cast Alloy AZ91 (G. Gerstmayr, G. Mori, and W. Eichlseder).
Characterization of Multilayer Coating Prepared by Combining Plasma Electrolyte Deposition and Electroless Copper and BTA Passivity on Magnesium Alloy (Y. Jiang, and Y. Bao).
Enhanced Corrosion Resistance of AZ91 Mg Alloy by Plasma Electrolytic Oxidation with Kmno4 (D. Shin, I. Hwang, K. Shin, K. Lee, and B. Yoo).
Laser Surface Alloying of a Creep Resistant Magnesium Alloy MRI 230D with Al and Al2O3 (G. Rapheal, S. Kumar, C. Blawert, and N. B. Dahotre).
Corrosion Phenomenon Evaluation of Mg Alloys Using Surface Potential Difference Measured by SKPFM (R. Takei, H. Fukuda, H. Imai, J. Umeda, and K. Kondoh).
A Study of Corrosion Film Growth on Pure Magnesium and a Creep-Resistant Magnesium Alloy in an Automotive Engine Coolant (Z. Shi, P. Mallick, R. McCune, S. Simko, and F. Naab).
Improving Corrosion Performance of AZ31B Mg Alloy Sheet by Surface Polishing (G. Song, and Z. Xu).
Microstructure and Corrosion of AZ91D with Small Amounts of Cerium (D. Zander, M. Heilig, N. Hort, G. Klaus, A. Buehrig-Polaczek, J. Gröbner, and R. Schmid-Fetzer).
Effect of Neodymium Addition on Corrosion Resistance of Mg-Li Alloy (M. Li, G. Yao, Y. Liu, and H. Ji).
Creep, Relaxation, Recovery, and Recrystallization.
Effect of Aluminum Addition on the Strengthening and High Temperature Deformation Behavior of Mg-3Sn-2CaAlloy (P. Kamineni, Y. Prasad, N. Hort, and K. Kainer).
Atomistic Simulation of Grain Boundary Sliding in Mg during High Temperature Deformation (H. Zhang).
Grain Size Effect on the Dome-Forming Limit and Deformation Mechanism of AZ31B Magnesium Alloy Sheets (H. Kim, W. Bang, and Y. Chang).
Approaching Bolt Load Retention Behaviour of AS41 through Compliance and Creep Deformation (O. Anopuo, Y. Huang, N. Hort, H. Dieringa, and K. Kainer).
Elevated Temperature Tensile Behavior of Extruded Magnesium Sheets (P. Krajewski, and A. Ben-Artzy).
Elevated-Temperature Tensile Behavior of a Rapidly Solidified and Reverse Extruded Mg-Zn-Y-Ce-Zr Alloy (J. Carter, P. Krajewski, and D. Shechtman).
Microstructure, Tensile Properties and Creep Resistance of Binary Mg-Rare Earth Alloys (M. Gibson, S. Zhu, M. Easton, and J. Nie).
The Role of Strain on the Recrystallization Behaviour of Hot Worked and Annealed Magnesium Alloy Mg-3Al-1Zn (A. Beer).
The Relationships between Grain Boundary Sliding and Grain Orientation in AZ31 Magnesium Alloys at Room Temperature (D. Ando, Y. Sutou, and J. Koike).
Texture Change in Pure Mg and Mg-1.5wt%Mn Casting Alloy During Compressive Creep-Deformation (M. Celikin, D. Sediako, and M. Pekguleryuz).
Fatigue, Failure, and Wear.
Effect of Shot Peening on High Cycle Fatigue Performance of Mg–10Gd–3Y–0.5Zr Magnesium Alloy (W. Liu, J. Dong, P. Zhang, L. Jin, and W. Ding).
Monotonic and Multiaxial Cyclic Behavior of the Extruded AZ31B Magnesium Alloy (J. Albinmousa, H. Jahed, and S. Lambert).
Fatigue Evaluation of Friction Stir Spot Welds in Magnesium Sheets (J. Jordon, M. Horstemeyer, and J. Grantham).
Atomistic Simulations of Fatigue Crack Growth and the Influence of Temperature on Fatigue Behavior in Magnesium Crystals (T. Tang, S. Kim, and M. Horstemeyer).
Structure-Property Evaluation of Fatigue Damage in a Magnesium AM30 Alloy (J. Bernard, J. Jordon, M. Horstemeyer, and H. ElKadiri).
Very High Cycle Fatigue Property of Magnesium Alloy in Axial Loading and Rotating Bending (T. Sakai, Y. Nakamori, N. Ninomiya, and M. Ueda).
Numerical Modeling of Failure in Magnesium Alloys during Crush Simulations (J. Rossiter, K. Inal, and R. Mishra).
Dry Sliding Wear Behavior of AE44 Magnesium Alloy Reinforced with Saffil Alumina Fibers (B. Hu, L. Peng, B. Powell, M. Lukitsch, and A. Sachdev).
Influence of Cerium on Stress Corrosion Cracking in AZ91D (M. Heilig, D. Zander, D. Olson, B. Mishra, N. Hort, G. Klaus, A. Buehrig-Polaczek, J. Gröbner, and R. Schmid-Fetzer).
Mg-RE (Rare Earth) Alloys.
Development of High Ductility Magnesium-Zinc-Cerium Extrusion Alloys (A. Luo, R. Mishra, and A. Sachdev).
Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr Alloy Solid State Recycled by Hot Extrusion (J. Chen, Q. Wang, T. Peng, Z. Zhao, and W. Ding).
Structure of ß1 Precipitates in Mg-Zn Based Alloys: Co-existence of MgZn2 and Mg4Zn7 phases (A. Singh, J. Rosalie, H. Somekawa, and T. Mukai).
Rheological Behavior of Semi-solid Mg-Y Alloys (Q. Peng, Y. Huang, N. Hort, and K. Kainer).
The Use of Computer Modeling for Producing DC Cast WE43 Magnesium Alloy Slab (M. Turski, J. Grandfield, T. Wilks, B. Davis, and R. DeLorme).
Effects of Extrusion Conditions on the Microstructure and Properties of Mg-Zn-Y-RE Alloys (J. Kim, and Y. Kawamura).
Effect of Cerium on the Deformation Behavior of Two Mg-Ce Alloys (L. Jiang, X. Quelennec, J. Jonas, and R. Mishra).
Structural Relationships Between Monoclinic and Laves Phase Precipitates in Mg-Zn-Y alloys (J. Rosalie, H. Somekawa, A. Singh, and T. Mukai).
Exploiting Low Levels of Rare Earth Addition in Mg Extrusion Alloys (M. Barnett, A. Beer, and N. Stanford).
Thermodynamic Database Development of Mg Alloys with RE Elements and Its Applications to Mg Alloy Design (Y. Kang, L. Jin, I. Jung, A. Pelton, P. Chartrand, and C. Fuerst).
Casting and Cast Alloys.
Effects of Section Thicknesses on Tensile Properties of Permanent Mould Cast Magnesium Alloy AJ62 (J. Burns, L. Han, H. Hu, and X. Nie).
Growth Restriction Factor Effects Near the Surface of High Pressure Die Cast Mg-Al Binary Alloys (A. Nagasekhar, C. Caceres, and M. Easton).
Strengthening Mechanisms in Mg-Al-Sn Based Alloys (S. Avraham, A. Katsman, and M. Bamberger).
Numerical Simulation and Experimental Study of Squeeze Casting Magnesium Alloy AM50 (Z. Sun, H. Hu, and A. Yu).
Section Thickness and the Skin Effect in a High Pressure Die Cast Mg-12%Al Alloy (K. Yang, A. Nagasekhar, and C. Caceres).
Investigations on Microstructure and Properties of Mg-Sn-Ca alloys with 3% Al Additions (F. ElSayed, T. Abuleil, A. El-Aziz, K. Kainer, and N. Hort).
Simulation of Stresses during Casting of Binary Magnesium-Aluminum Alloys (M. Pokorny, C. Monroe, C. Beckermann, Z. Zhen, and N. Hort).
Study on the Microstructure Changes during the in situ Tensile Processes of as-cast and Aged Specimens of High-vacuum Die-cast Mg-9Al-1Zn Alloy (J. Song, and S. Xiong).
Structure-Property Relationships for Die-Cast Magnesium Alloys (J. Wood, J. Weiler, J. Jekl, and R. Berkmortel).
Grain Refinement of Mg-Al Alloys by Carbon Inoculation (Y. Huang, B. Liu, O. Anopuo, N. Hort, and K. Kainer).
A Systematic Study of the Grain Refinement of Magnesium by Zirconium (P. Saha, K. Lolies, S. Viswanathan, A. Gokhale, and R. Batson).
The Evolution of In-Grain Misorientation Axes (IGMA) During Deformation of Wrought Magnesium Alloy AZ31 (Y. Chun, and C. Davies).
Influence of Deformation Processing on the Tensile/Compressive Asymmetry in Wrought Mg-3Al-Zn Alloy (R. Liu, D. Yin, and J. Wang).
Importance of Crystallographic Texture of AZ31B on Flow Stress Anisotropy and Tension-Compression Asymmetry (M. Al-Maharbi, D. Floey, I. Karaman, I. Beyerlein, T. Hartwig, L. Kecskes, and S. Mathaudhu).
Mechanical Behavior of AZ31 Due to Texture and Microstructure (D. Foley, M. Al-Maharbi, K. Hartwig, I. Karaman, L. Kecskes, and S. Mathaudhu).
Tensile Mechanical Properties and the Ductile-To-Brittle Transition Behavior of the Mg-Li-Al-Zn Alloy (C. Yang, T. Lui, and L. Chen).
The Influence of Sn and Pb Addition on the Tensile Properties of Mg Alloys (W. Gao, and H. Liu).
Room Temperature Tensile Anisotropy of Extruded Magnesium Plates (P. Krajewski, A. Ben-Artzy, and R. Mishra).
Mechanical Properties and Microstructural Analysis of AXJ530 Magnesium Alloy Reinforced with Alumina Fibers (B. Hu, L. Peng, B. Powell, and A. Sachdev).
Very High Strain Rate Deformation of AZ31b Mg Alloys Using Split Hopkinson Pressure Bar (M. Sanjari, A. Farzadfar, S. Yue, and E. Essadiqi).
Effects of Heat Treatment and Casting Process.
On Mechanical Properties and Microstructures of TTMP Wrought Mg Alloys (J. Huang, T. Arbel, L. Ligeski, J. McCaffrey, S. Kulkarni, J. Jones, T. Pollock, R. Decker, and S. LeBeau).
The Effect of Thermomechanical Processing on the Tensile and Fatigue Behavior of Thixomolded AM60 (Z. Chen, B. Kuhr, A. Ritter, J. Huang, R. Decker, S. LeBeau, and C. Boehlert).
Influence of the Heat Treatment on Mechanical Properties and Microstructure in LPSO Mg-Zn-Y Alloys (M. Noda, T. Mayama, and Y. Kawamura).
The Effect of Zn Additions on Precipitation Hardening of Mg-Ca Alloys (B. Langelier, and S. Esmaeili).
The Recent Developments in Mg-Sn based Alloy Thermodynamic Database (M. Paliwal, J. Kim, D. Kang, and I. Jung).
Influence of Zn Additions on Age Hardening Response and Microstructure of Mg- 0.3at.%Ca Alloys (K. Oh-ishi, C. Mendis, R. Watanabe, and K. Hono).
Implementation of the Anisotropy of Plastic Flow in Inverse Parameter Calculations of the Deformation Behavior of AZ31 Magnesium Alloy (T. Ebeling, C. Hartig, and R. Bormann).
Effect of Aging and Thermomechanical Processes in Twin Roll Cast Mg AZ91 Alloy Sheet (O. Duygulu, S. Ucuncuoglu, G. Oktay, O. Yucel, and A. Kaya).
Experimental Studies on the As-Cast Microstructure of Mg-Al Binary Alloys with Various Solidification Rates and Compositions (D. Kang, M. Paliwal, E. Essadiqi, and I. Jung).
Impurity and Tracer Diffusion Studies of Magnesium and its Alloys (S. Brennan, A. Warren, K. Coffey, Y. Sohn, N. Kulkarni, and P. Todd).
Effect of Alloying and Solidification Rates on Microstructure of Hot Rolled and Annealed Micro-Alloyed Az31 Sheet (E. Essadiqi, A. Javaid, M. Shehata, T. Muller, S. Yue, and R. Verma).
Forming and Welding.
Test Results and FEA Predictions from Magnesium AZ31 Sheet Beams in Bending and Axial Compression (D. Wagner, S. Logan, K. Wang, and T. Skszek).
Microstructure and Mechanical Properties of Magnesium Extrusion Alloys AM30 and AZ31 (A. Luo, J. Forsmark, X. Sun, S. Shook, W. Misiolek, and R. Mishra).
Texture Development in a Twin Roll Cast and Warm Rolled ZK60 Magnesium Alloy (H. Chen, H. Yu, S. Kang, and G. Min).
Cruciform Geometries for Elevated Temperature Biaxial Testing of Mg AZ31B (F. Abu-Farha, and L. Hector).
Characterization of Continuous-Cast AZ31B Magnesium Alloy Sheets and Lubricants for Warm-Forming - Friction Effects (A. Rohatgi, D. Herling, and E. Nyberg).
High Strength ZK60 Mg Plate Produced by Grain Refinement and Precipitation during Alternate Biaxial Reverse Corrugation (ABRC) Process and Friction Stir Process (FSP) (B. Mansoor, S. Mukherjee, and A. Ghosh).
Formability of Mg Alloys at Room Temperature (D. Kim, D. Kang, S. Kim, G. Bae, K. Kim, and N. Kim).
Dynamic Blankholder Control for the Enhanced Forming Limit of Magnesium Sheets (W. Bang).
Accumulative Roll Bonding of Wrought Magnesium Alloy (H. Nayaka, B. Daniel, and G.).
ICME II and Biomedical Applications.
Two- and Three-Dimensional Cellular Automaton Models for Simulating Dendrite Morphology Evolution of Cast Magnesium Alloys (L. Huo, Z. Han, and B. Liu).
Elemental Partitioning and Microstructure of Mg-Al-Ca-Sn Quaternary Alloys (J. TerBush, O. Chen, J. Jones, and T. Pollock).
Numerical Simulation of Flow-Induced Air Entrapment Defects in the High Pressure Die Casting Process (S. Li, S. Xiong, B. Liu, M. Li, and J. Allison).
ESPEI: Extensible, Self-optimizing Phase Equilibrium Infrastructure for Magnesium Alloys (S. Shang, Y. Wang, and Z. Liu).
Modeling Casting and Heat Treatment Effects on Microstructure in Super Vacuum Die Casting (SVDC) AZ91 Magnesium Alloy (M. Li, R. Zhang, and J. Allison).
Experimental and Computational Simulation of the Post-Warm Forming Constitutive Behavior of AZ31 (F. Polesak, B. Raeisinia, and S. Agnew).
Assessing and Modeling the Impact of Initial Microstructure on Dynamic Recrystallization of Sheets (F. Polesak, P. Krajewski, B. Raeisinia, and S. Agnew).
Modified AZ80 Magnesium Alloys for Biomedical Applications (M. Erinc).
The Dissolution Behavior of a Mg-Zn-Ca Alloy for Biomedical Applications (M. Manuel, and H. Brar).
Neale R. Neelameggham
Eric A. Nyberg