U.S Market for Dental Prosthetics and CAD/CAM Devices
iData Research, February 2013, Pages: 250
In 2012 the U.S market for dental prosthetics, which includes crowns, bridges, inlays/onlays, veneers and dentures, exceeded $11.6 billion.
Lingering effects of the recession continue to affect this market adversely. Dental care is an elective procedure; therefore patients are likely to opt out of treatment during times of financial uncertainty. As the economy recovers and baby boomers continue to age, market growth will begin to accelerate. Furthermore, built up demand from patients delaying dental care will become apparent over the next couple years. However, due to increased personal hygiene, the demographic evidence pointing to increased prosthetic sales has not yet been seen. High market growth is expected to occur nearing the end of the forecast period as people are keeping their teeth healthy for longer periods of time.
Scope: This report pertains to a forecast period of 10 years (2009 – 2019) for the U.S.
Report Contents:
- Competitor Analysis
- Identified Strategic Opportunities
- Market Overview by Segment & Country
- Trend Analysis by Segment & Country
- Market Drivers & Limiters
- Mergers & Acquisitions
- Customer Feedback and Market Monitoring
Main Segments Included:
- Crowns and Bridges
- Inlays and Onlays
- Veneers
- Dentures
- CAD/CAM Systems
- CAD/CAM Blocks and Prosthetic Devices
- Intra-Oral Digital Impression-Taking Systems
- Automated Prosthetics Manufacturing
- Rapid Prototyping Systems/3D Printing
Reasons To Buy:
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “bottom up” approach, which includes primary and secondary research methods.
List Of Figures
List Of Charts
Executive Summary
1.1 U.Smarket For Dental Prosthetics
1.2 Growth Trends By Segment
1.3 Crown And Bridge Market
1.4 Inlay And Onlay Market
1.5 Veneer Market
1.6 Denture Market
1.7 Cad/Cam System Market
1.8 Cad/Cam Blocks And Prosthetics Market
1.9 Intra-Oral Digital Impression-Taking System Market
1.10 Rapid Prototyping System Market
1.11 Competitive Analysis
1.11.1 Dental Prosthetics Market
1.11.2 Leading Competitors Cad/Cam System And Rapid Prototyping Markets
Research Methodology
2.1 Research Scope
2.2 Idata’S 9-Step Methodology
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems And Perform Secondary Research
Step 3: Preparation For Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast And Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review And Market Release
Step 9: Customer Feedback And Market Monitoring
Dental Prosthetics Market Overview
3.1 Introduction
3.1.1 Dental Health Statistics In The United States
3.1.2 Crowns And Bridges
3.1.2.1 Crowns
3.1.2.2 Bridges
3.1.2.3 Material Types
3.1.3 Inlays And Onlays
3.1.3.1 Material Types
3.1.4 Veneers
3.1.4.1 Material Types
3.1.5 Dentures
3.1.5.1 Full Dentures
3.1.5.2 Partial Dentures
3.1.6 Manufacturing Process And Technological Developments
3.1.6.1 Conventional Fabrication
3.1.6.2 Cad/Cam Technology
3.1.6.3 Intra-Oral Digital Impression-Taking
3.1.6.4 Rapid Prototyping
3.2Market Overview
3.3Market By Segment
3.3.1 Unit Analysis
3.3.2 Dental Implant Supported Prosthetics
3.3.2.1 Dental Implant Penetration In The Dental Prosthetics Market
3.4 Trend Analysis By Segment
3.5Market Drivers And Limiters
3.5.1 Market Drivers
3.5.2 Market Limiters
3.6 Competitive Analysis
3.7 Dental Laboratory Industry
3.8Mergers, Acquisitions And Partnerships
3.8.1 Dental Prosthetics Market
3.8.2 Cad/Cam System Market
3.8.3 Intra-Oral Digital Impression-Taking System Market
3.8.4 Rapid Prototyping System Market
Crown And Bridge Market
4.1 Introduction
4.2Market Overview
4.3Market Analysis And Forecast
4.3.1 Crown Market
4.3.2 Bridge Market
4.4Market By Material Type: Total Crown And Bridge Market
4.4.1 Full- Cast Crown And Bridge Market
4.4.1.1 Total Full-Cast Crown And Bridge Market
4.4.1.2 Full Cast Crown Market
4.4.1.3 Full-Cast Bridge Units
4.4.2 All-Ceramic Crown And Bridge Market
4.4.2.1 Total All Ceramic Crown And Bridge Market
4.4.2.2 All-Ceramic Crown Market
4.4.2.3 All-Ceramic Bridge Units
4.4.2.4 All-Ceramic, Zirconia
4.4.3 Pfm Non-Precious Alloy Crown And Bridge Market
4.4.3.1 Total Pfm Non-Precious Alloy Crown And Bridge Market
4.4.3.2 Non-Precious Alloy Crown Market
4.4.3.3 Pfm Non-Precious Alloy Bridge Market
4.4.4 Pfm Semi-Precious Alloy Crown And Bridge Market
4.4.4.1 Total Pfm Semi-Precious Alloy Crown Market
4.4.4.2 Pfm Semi-Precious Alloy Crown Market
4.4.4.3 Pfm Semi-Precious Alloy Bridge Market
4.4.4.4 Pfm Precious Alloy Crown And Bridge Market
4.4.4.5 Pfm Precious Alloy Crown Market
4.4.4.6 Pfm Precious Alloy Bridge Market
4.5Market Drivers And Limiters
4.5.1 Market Drivers
4.5.2 Market Limiters
4.6 Competitive Analysis
Inlay And Onlay Market
5.1 Introduction
5.2Market Analysis And Forecast
5.3Market By Material Type
5.3.1 Gold
5.3.2 Ceramic
5.3.3 Composite Resin
5.4Market Drivers And Limiters
5.4.1 Market Drivers
5.4.2 Market Limiters
5.5 Competitive Analysis
Veneer Market
6.1 Introduction
6.2Market Analysis And Forecast
6.3Market By Material Type
6.3.1 Porcelain
6.3.2 Composite Resin
6.4Market Drivers And Limiters
6.4.1 Market Drivers
6.4.2 Market Limiters
6.5 Competitive Analysis
Denture Market
7.1 Introduction
7.2Market Analysis And Forecast
7.2.1 Denture Market
7.2.1.1 Full Dentures
7.2.1.2 Partial Dentures
7.2.2 Denture False Teeth Market
7.2.3 Denture False Teeth Units By Material Type
7.2.3.1 Acrylic
7.2.3.2 Porcelain
7.2.3.3 Composite Resin
7.3Market Drivers And Limiters
7.3.1 Market Drivers
7.3.2 Market Limiters
7.4 Competitive Analysis
7.4.1 Denture Market
7.4.2 Denture False Teeth Market
7.5 Technological Advances
7.5.1 Digitized Dentures
Cad/Cam System Market
8.1 Introduction
8.2Market Overview
8.3Market Analysis And Forecast
8.3.1 Full In-Lab Cad/Cam System Market
8.3.2 Standalone Scanner Cad/Cam System Market
8.3.3 Chairside System Market
8.4Market Drivers And Limiters
8.4.1 Market Drivers
8.4.2 Market Limiters
8.5 Competitive Analysis
8.5.1 Full In-Lab Systems Market
Cad/Cam Block And Prosthetic Market
9.1 Introduction
9.2Market Analysis And Forecast
9.2.1 Cad/Cam Block Market
9.2.2 Cad/Cam Block Market By Material Type
9.2.2.1 Zirconia
9.2.2.2 Porcelain
9.2.2.3 Acrylic/Composite
9.2.2.4 Metal
9.2.3 Cad/Cam Prosthetic Device Market
9.2.3.1 Total Cad/Cam Prosthetic Device Market
9.2.3.2 Chairside Cad/Cam Prosthetics Market
9.2.3.3 In-Lab Cad/Cam Prosthetics Market
9.2.3.4 Cad/Cam Blocks Versus Cad/Cam Prosthetic Ratio
9.2.3.5 Penetration Rate, Cad/Cam Prosthetics Market
9.3Market Drivers And Limiters
9.3.1 Market Drivers
9.3.2 Market Limiters
9.4 Competitive Analysis
9.4.1 Cad/Cam Block Market
9.4.2 Cad/Cam Prosthetic Device Market
9.4.2.1 Chairside Cad/Cam Prosthetic Device Market
9.4.2.2 In-Lab Cad/Cam Prosthetic Device Market
9.4.2.3 Total Cad/Cam Prosthetic Device Market
Intra-Oral Digital Impression-Taking System Market
10.1 Introduction
10.2Market Analysis And Forecast
10.3Market Drivers And Limiters
10.3.1 Market Drivers
10.3.2 Market Limiters
10.4 Competitive Analysis
Rapid Prototyping System Market
11.1 Introduction
11.2Market Analysis And Forecast
11.3Market Drivers And Limiters
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 Competitive Analysis
Leading Competitors In The Market For Automated Prosthetics Manufacturing
12.1 Introduction
12.2 Cad/Camsystems
12.3 Digital Impression-Taking Systems
12.4 Rapid Prototyping Systems
Abbreviations
- Dental Services Group
- Astra Tech
- Solidscape
- Cadent
- Align Technology
- 3M ESPE
- Stratasys
- Novadent
- 3Shape
- IOS Technologies
- Dental Technologies Inc.
- Objet Geometries
- Dental Wings
- Glidewell Laboratories
- National Dentex Corporation
- Optimet
- Noritake
- Kuraray
- Noritake Integrates
- Nobel Biocare
- BIOMET 3i
- Straumann
- GeoDigm Corporation
- Dentsply
Also available
Customers who bought this item also bought
All rights reserved. © Copyright 2013 Research and Markets WWW6
Terms and Conditions Privacy Policy Publishers Employment Opportunities Site Map Link to us Webmaster Affiliate Network
