0 CHECKOUT

Automotive Fuel Injection Systems Market by Technology (Port Fuel, Gasoline Direct, & Direct Diesel), Fuel Type (Gasoline & Diesel), Region, and by Component - Trends & Forecast to 2020

  • ID: 3345910
  • July 2015
  • Region: Global
  • 183 Pages
  • Markets and Markets
In 2015, The Global Market For Fuel Injection Systems Is Estimated To Be At USD 54.72 Billion, Which Would Reach USD 73.62 Billion By 2020, Growing At A CAGR Of 6.11%

FEATURED COMPANIES

  • Benteler International AG
  • Continental AG
  • KYB Co.Ltd
  • Magneti Marelli S.P.A.
  • Mando Corp.
  • Schaeffler AG
  • MORE

The demand for automotive fuel injection system is governed by global vehicle production. Improved fuel efficiency & power output, reliability, ability to accommodate alternative fuels, and stringent exhaust emissions are some of the factors that are driving the demand for fuel injection systems in the automobile industry. Rising demand from countries such as China, India, and Brazil for two -wheelers is creating new growth opportunities for fuel injection systems. The overall demand of fuel injection system is expected to increase at a promising rate in the future.
The purpose of the fuel injection system is to calibrate and optimize the fuel/air ratio that enters the engine of a vehicle. The injection system consists of electronic components and sensors. It must be well-calibrated to maximize engine power & efficiency and to reduce gas consumption. The fuel injection system in gasoline engine cars is mostly indirect, with gasoline being injected into the inlet manifold or inlet port rather than directly into the combustion chambers. This ensures that the fuel is well mixed with the air before it enters the chamber. However, gasoline direct injection is an advanced injection READ MORE >

Note: Product cover images may vary from those shown

FEATURED COMPANIES

  • Benteler International AG
  • Continental AG
  • KYB Co.Ltd
  • Magneti Marelli S.P.A.
  • Mando Corp.
  • Schaeffler AG
  • MORE

1 Introduction
1.1 Objectives Of The Study
1.2 Markets Definition
1.3 Market Scope
1.3.1 Markets Covered
1.3.2 Years Considered In The Report
1.4 Currency
1.5 Limitations
1.6 Stakeholders

2 Research Methodology
2.1 Research Data
2.2 Secondary Data
2.2.1 Key Secondary Sources
2.2.2 Key Data From Secondary Sources
2.3 Primary Data
2.3.1 Sampling Techniques & Data Collection Methods
2.3.2 Primary Participants
2.4 Factor Analysis
2.4.1 Introduction
2.4.2 Demand Side Analysis
2.4.2.1 Impact Of Gdp On Commercial Vehicle Sales
2.4.2.2 Urbanization Vs. Passenger Car Per 1,000 People
2.4.2.3 Infrastructure: Roadways
2.4.3 Supply Side Analysis
2.4.3.1 Vehicle Production Increasing In Developing Countries
2.4.4 Technological Advancement
2.4.5 Influence Of Other Factors
2.5 Market Estimation
2.5.1 Bottom-Up Approach
2.5.2 Data Triangulation
2.5.3 Assumptions

3 Executive Summary

4 Premium Insights
4.1 Introduction
4.2 Emerging Opportunities In The Suspension System Market
4.3 Suspension System Market Growth, By Country (Usd Million)
4.4 Suspension System Market Growth, By System Type (Usd Million)
4.5 Macpherson Strut And Double Wishbone Suspension System Type,
2015 Vs. 2020, (Usd Million)
4.6 Suspension System Market Growth, By Damping Type (Usd Million)
4.7 Life Cycle Analysis
4.8 Who Supplies To Whom

5 Market Overview
5.1 Introduction
5.2 Market Segmentation
5.2.1 By System Type
5.2.2 By Region
5.2.3 By Architecture
5.2.4 By Damping Type
5.3 Technological Roadmap
5.4 Market Dynamics
5.4.1 Drivers
5.4.1.1 Increasing Vehicle Production
5.4.1.2 Significance Of Ride Control Performance
5.4.2 Restraints
5.4.2.1 High Development Cost Of Advanced Suspension System
5.4.2.2 Fluctuating Raw Materials Price
5.4.3 Opportunities
5.4.3.1 Increase In Demand For Adaptive / Semi-Active Suspension System
5.4.3.2 Growing Demand For Fuel Economy And Environment Concerns
5.4.4 Challenges
5.4.4.1 Lack Of Standardization In The Independent Suspension System
5.4.4.2 Overcoming Steer Torque For Better Vehicle Performance And Ride Comfort
5.5 Burning Issue
5.5.1 Control On Fuel Consumption & Carbon Emissions
5.6 Porter’S Five Forces Analysis
5.6.1 Threat Of New Entrants
5.6.2 Threat Of Substitutes
5.6.3 Bargaining Power Of Suppliers
5.6.4 Bargaining Power Of Buyers
5.6.5 Intensity Of Competitive Rivalry
5.7 Value Chain Analysis
5.8 Further Suspension System Technologies
5.8.1 Energy Recovery Suspension System
5.8.2 Linear ElectromAGnetic Motor
5.8.3 E-Corner Suspension Modules
5.8.4 Active Curve Tilting
5.9 Types Of Suspension Systems
5.9.1 Passive Suspension System
5.9.2 Semi-Active Suspension System
5.9.3 Active Suspension System
5.10 Key Components Of A Suspension System
5.10.1 Springs
5.10.2 Shock Absorbers
5.10.3 Control Arm
5.10.4 Struts
5.10.5 Ball Joints

6 Automotive Suspension System Market, By Architecture
6.1 Introduction
6.1.1 Dependent Suspension System
6.1.2 Semi-Independent/Independent Suspension System
6.1.3 Macpherson Strut
6.1.4 Double Wishbone

7 Automotive Suspension System Market, By Damping Type
7.1 Introduction
7.2 Hydraulically/Pneumatically Damped Suspension System Market
7.3 ElectromAGnetically Damped Suspension System Market

8 Suspension System Market, By Region
8.1 Introduction
8.1.1 Asia-Oceania
8.1.1.1 China
8.1.1.2 India
8.1.1.3 Japan
8.1.1.4 South Korea
8.1.1.5 Rest Of Asia-Oceania
8.1.1.6 Pest Analysis
8.1.1.6.1 Political Factors
8.1.1.6.2 Economic Factors
8.1.1.6.3 Social Factors
8.1.1.6.4 Technological Factors
8.1.2 Europe
8.1.2.1 Germany
8.1.2.2 France
8.1.2.3 U.K
8.1.2.4 Spain
8.1.2.5 Rest Of Europe
8.1.2.6 Pest Analysis
8.1.2.6.1 Political Factors
8.1.2.6.2 Economic Factors
8.1.2.6.3 Social Factors
8.1.2.6.4 Technological Factors
8.1.3 North America
8.1.3.1 U.S.
8.1.3.2 Mexico
8.1.3.3 Canada
8.1.3.4 Pest Analysis
8.1.3.4.1 Political Factors
8.1.3.4.2 Economic Factors
8.1.3.4.3 Social Factors
8.1.3.4.4 Technological Factors
8.1.4 Row (Rest Of World)
8.1.4.1 Brazil
8.1.4.2 Russia
8.1.4.3 South Africa
8.1.4.4 Row Others
8.1.4.5 Pest Analysis
8.1.4.5.1 Political Factors
8.1.4.5.2 Economic Factors
8.1.4.5.3 Social Factors
8.1.4.5.4 Technological Factors

9 Competitive Landscape
9.1 Market Share Analysis, Suspension System Market
9.2 Competitve Situation And Trends
9.3 New Product Launches
9.4 Expansions
9.5 Mergers & Acquisitons And Other Developments
9.6 AGreements/Joint Ventures/Supply Contracts/Partnerships

10 Company Profiles
10.1 Introduction
10.2 Zf Friedrichshafen AG
10.3 Tenneco Inc.
10.4 Kyb Co.Ltd
10.5 Continental AG
10.6 Magneti Marelli S.P.A.
10.7 Benteler International AG
10.8 Schaeffler AG
10.9 Wabco Holdings Inc.
10.10 Mando Corp.
10.11 Thyssenkrupp AG

11 Appendix
11.1 Discussion Guide
11.2 Introducing Rt: Real Time Market Intelligence
11.3 Available Customizations
11.3.1 Automotive Suspension Systems Market, By Component
11.3.1.1 Spring
11.3.1.2 Damper
11.3.1.3 Strut
11.3.1.4 Control Arm
11.3.1.5 Ball Joint
11.3.2 Automotive Suspension Systems Market, By Two-Wheeler
11.3.2.1 Asia-Oceania
11.3.2.2 Europe
11.3.2.3 North America
11.3.2.4 Row
11.3.3 Automotive Suspension Systems Market, By Off-Highway Vehicles
11.3.3.1 Construction Equipment
11.3.3.2 Mining Equipment
11.4 Related Reports

List Of Tables

Table 1 Micro And Macro Factor Analysis
Table 2 Trend In Euro Emission Standards
Table 3 Dependent Suspension System Market Size, By Region ,
2013-2020 (‘000 Units)
Table 4 Dependent Suspension System Market Size , By Region ,
2013-2020 (USD Million)
Table 5 Semi-Independent/Independent Suspension System Market Size ,
By Region , 2013-2020 (‘000 Units)
Table 6 Semi-Independent/Independent Suspension System Market Size ,
By Region , 2013-2020 (USD Million)
Table 7 Macpherson Strut Market Size , By Region , 2013-2020 (‘000 Units)
Table 8 Macpherson Strut Market Size , By Region , 2013-2020 (USD Million)
Table 9 Double Wishbone Market Size , By Region , 2013-2020 (‘000 Units)
Table 10 Double Wishbone Market Size , By Region , 2013-2020 (USD Million)
Table 11 Automotive Suspension System Market Size, By Damping ,
2013–2020 (‘000 Units)
Table 12 Automotive Suspension System Market Size , By Damping ,
2013–2020 (USD Million)
Table 13 Hydraulically/Pneumatically Damped Suspension System Market Size , By Region , 2013-2020 (‘000 Units)
Table 14 Hydraulically/Pneumatically Damped Suspension System Market Size , By Region , 2013–2020 (USD Million)
Table 15 Electromagnetically Damped Suspension System Market Size , By Region , 2013-2020 (‘000 Units)
Table 16 Electromagnetically Suspension System Market Size , By Region ,
2013-2020 (USD Million)
Table 17 Automotive Suspension System Market Size, By Geography,
2013-2020 (‘000 Units)
Table 18 Automotive Suspension System Market Size, By Geography,
2013-2020 (USD Million)
Table 19 Automotive Suspension System Market Size, By Vehicle Type,
2013-2020 (‘000 Units)
Table 20 Automotive Suspension System Market Size, By Vehicle Type,
2013-2020 (USD Million)
Table 21 Automotive Suspension System Market Size, By System Type,
2013-2020 (‘000 Units)
Table 22 Automotive Suspension System Market Size, By System Type,
2013-2020 (USD Million)
Table 23 Asia-Oceania: Suspension System Market Size, By Country,
2013-2020 (‘000 Units)
Table 24 Asia-Oceania: Suspension System Market Size, By Country,
2013-2020 (USD Million)
Table 25 China: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 26 China: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 27 India: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 28 India: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 29 Japan: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 30 Japan: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 31 South Korea: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 32 South Korea: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 33 Rest Of Asia-Oceania: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 34 Rest Of Asia-Oceania: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 35 Europe: Automotive Suspension System Market Size , By Country ,
2013-2020 (‘000 Units)
Table 36 Europe : Automotive Suspension System Market Size , By Country ,
2013-2020 (USD Million)
Table 37 Germany: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 38 Germany: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 39 France: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 40 France: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 41 U.K: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 42 U.K: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 43 Spain: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 44 Spain: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 45 Rest Of Europe: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 46 Rest Of Europe: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 47 North America: Automotive Suspension System Market Size , By Country , 2013-2020 (‘000 Units)
Table 48 North America: Automotive Suspension System Market Size , By Country , 2013-2020 (USD Million)
Table 49 U.S.: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 50 U.S.: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 51 Mexico: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 52 Mexico: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 53 Canada: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 54 Canada: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 55 Row: Automotive Suspension System Market Size , By Country ,
2013-2020 (‘000 Units)
Table 56 Row: Automotive Suspension System Market Size , By Country ,
2013-2020 (USD Million)
Table 57 Brazil: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 58 Brazil: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 59 Russia: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 60 Russia: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 61 South Africa: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 62 South Africa: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 63 Others: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (‘000 Units)
Table 64 Others: Automotive Suspension System Market Size,
By Vehicle And System Type, 2013-2020 (USD Million)
Table 65 New Product Launches, 2012–2015
Table 66 Expansions, 2010–2015
Table 67 Mergers & Acqusitions And Other Developments , 2010–2015
Table 68 Agreements/Joint Ventures/Supply Contracts/Partnerships ,
2010–2014

List Of Figures

Figure 1 Research Design
Figure 2 Research Methodology Model
Figure 3 Breakdown Of Primary Interviews: By Company Type, Designation,
& Region
Figure 4 Gross Domestic Product (Gdp) Vs. Commercial Vehicle Sales
Figure 5 Urbanization Vs. Passenger Cars Per 1,000 People
Figure 6 Road Network Vs Total Vehicle Sales
Figure 7 Vehicle Production, 2009-2014
Figure 8 Market Size Estimation Methodology: Bottom-Up Approach
Figure 9 Data Triangulation
Figure 10 Asia-Oceania Suspension System Market Estimated To Hold Market Share, By Volume, 2015 (‘000 Units)
Figure 11 Asia-Oceania Suspension System Market, By Damping Type, 2015 Vs. 2020
Figure 12 Passive Suspension System Market In Asia-Oceania Estimated To Hold
The Largest Share, 2015
Figure 13 Semi-Independent/Independent Suspension System In Asia-Oceania To Hold The Largest Market Share, 2015
Figure 14 Automotive Suspension System Market: Asia-Oceania Projected To Be
The Fastest Growing Market During The Forecast Period
Figure 15 Attractive Market Opportunities In Automotive Suspension System Market
Figure 16 China,Spain, And India To Be The Fastest Growing Markets For Automotive Suspension Systems, 2015–2020
Figure 17 Semi-Active/Active Suspensions To Dominate The Automotive Market
Figure 18 Macpherson Strut Type Of Suspension System Is Projected To Grow At A Higher CAGr From 2015 To 2020
Figure 19 Hydraulically/Pneumatically Damped Suspension System Is Estimated To Have A Higher Market Size, By Value, 2015
Figure 20 Life Cycle Analysis, By System, 2015
Figure 21 Evolution Of Suspension System, 1873-2013
Figure 22 Automotive Suspension System – Market Dynamics
Figure 23 Global Vehicle Production, 2013-2020 (‘000 Units)
Figure 24 Porter’S Five Forces Analysis : Suspension System Market
Figure 25 Automotive Suspension System Market : Value Chain Analysis
Figure 26 Dependent Suspension System Market, 2015 Vs. 2020
Figure 27 Semi-Independent/Independent Suspension System Market Size,
2015 Vs. 2020
Figure 28 Macpherson Strut Market Size, 2013 – 2020, (‘000 Units)
Figure 29 Hydraulically/Pneumatically Damped Suspension System Estimated To Have Highest Market Share, 2015 Vs. 2020
Figure 30 Asia-Oceania Is Estimated To Be The Largest Market For Hydraulically/Pneumatically Damped Suspension System
Figure 31 Asia-Oceania Is The Largest Market For ElectromAGnetically Damped System Globally , By Volume (‘000 Units)
Figure 32 Region-Wise Snapshot Of Automotive Suspension System Market Size
By Volume (2015)- Rapid Growth Markets Are Emerging As New Hot Spots
Figure 33 Automotive Suspension System Market : China Is Having Largest Market Globally, 2015
Figure 34 China Is Estimated To Be The Largest Market For Automotive Suspension System (2015)
Figure 35 Germany Is Estimated To Be The Largest Market For Automotive Suspension System Market (2015)
Figure 36 North America: Automotive Suspension System Market, By Country
Figure 37 Brazil Is Estimated To Hold The Largest Market Share Of Automotive Suspension System Market In Row
Figure 38 Companies Adopted Expansion As The Key Growth Strategy
Figure 39 Tenneco Inc. Registered The Highest Growth Rate From 2010-2013
Figure 40 Automotive Suspension System Market Share, 2014
Figure 41 Market Evaluation Framework: 2012 To 2015
Figure 42 Battle For Market Share Expansion Was The Key Startegy Adopted
By Major Oems
Figure 43 Region-Wise Revenue Mix Of Four Major Players
Figure 44 Competitive Benchmarking Of Key Market Players
Figure 45 Zf Friedrichshafen AG.: Business Overview
Figure 46 Swot Analysis – Zf Friedrichshafen AG
Figure 47 Tenneco Inc.: Business Overview
Figure 48 Swot Analysis- Tenneco Inc.
Figure 49 Kyb Co.Ltd.: Business Overview
Figure 50 Swot Analysis – Kyb Co. Ltd
Figure 51 Continental AG.: Business Overview
Figure 52 Swot Analysis – Continental AG
Figure 53 Magneti Marelli S.P.A.: Business Overview
Figure 54 Swot Analysis – MAGneti Marelli S.P.A
Figure 55 Benteler International AG.: Business Overview
Figure 56 Swot Analysis – Benteler International AG
Figure 57 Schaeffler AG: Business Overview
Figure 58 Wabco Holdings Inc.: Business Overview
Figure 59 Mando Corp.: Business Overview
Figure 60 Thyssenkrupp AG.: Business Overview

Note: Product cover images may vary from those shown

FEATURED COMPANIES

  • Benteler International AG
  • Continental AG
  • KYB Co.Ltd
  • Magneti Marelli S.P.A.
  • Mando Corp.
  • Schaeffler AG
  • MORE

In 2015, the global market for fuel injection systems is estimated to be at USD 54.72 Billion, which would reach USD 73.62 Billion by 2020, growing at a CAGR of 6.11%.

The demand for automotive fuel injection system is governed by global vehicle production. Improved fuel efficiency & power output, and stringent exhaust emissions are some of the factors are driving demand for fuel injection systems in the automobile industry. Rising demand from countries such as China, India, and Brazil for two-wheeler is creating new growth opportunities for fuel injection systems. The overall demand of fuel injection system is expected to increase at a promising rate in the future.

Growing concerns over fuel efficiency, increasing fuel prices & environmental regulations, and vehicle exhaust gases have made companies look for alternative technologies. In case of gasoline engines, the gasoline direct injection technology can offer all these benefits at a reasonable cost. This technology has already started gaining a significant market share over gasoline port fuel injection technology in all the developed countries and developing countries. The diesel direct injection technology is widely preferred across the globe.

This report estimates the global automotive fuel injection market for 2015 and projects the demand for the same by 2020. The report segments the market based on vehicle types (passenger car, light commercial vehicles, and heavy commercial vehicles), by region (Asia-Pacific, Europe, North America, and the rest of the world), fuel types (gasoline and diesel), by technology (port injection, gasoline direct injection, and diesel direct injection), and components (injectors, ECU, pressure regulators, and fuel pumps).

The market in Asia-Pacific region is growing at a good pace, given the increasing automotive production in these regions. Growing purchasing power, demand for high fuel efficient vehicles, and enforcement of stringent emission norms in emerging nations such as China, Thailand, and India has resulted in an increase in demand for fuel injection system. The market in Asia-Pacific is estimated to be the largest market for fuel injection system market and is projected to grow at the highest rate from 2015 to 2020.

The global fuel injection system market is dominated by few top players such as Continental AG (Germany), Delphi Automotive PLC (U.K.), Denso Corporation (Japan), Robert Bosch (Germany), Hitachi Limited (Japan), and Magneti Marelli (Italy) among others along with regional suppliers.

Note: Product cover images may vary from those shown

- Benteler International AG
- Continental AG
- KYB Co.Ltd
- Magneti Marelli S.P.A.
- Mando Corp.
- Schaeffler AG
- Tenneco Inc.
- Thyssenkrupp AG
- Wabco Holdings Inc.
- Zf Friedrichshafen AG

Note: Product cover images may vary from those shown
Note: Product cover images may vary from those shown

PLEASE SELECT A FORMAT

  • Quick Help: The report will be emailed to you. The report is sent in PDF format. This is a single user license, allowing one specific user access to the product.

  • Quick Help: The report will be emailed to you. The report is sent in PDF format. This is a 1-5 user licence, allowing up to five users have access to the product.

  • Quick Help: The report will be emailed to you. The report is sent in PDF format. This is a site license, allowing all users within a given geographical location of your organisation access to the product.

  • Quick Help: The report will be emailed to you. The report is sent in PDF format. This is an enterprise license, allowing all employees within your organisation access to the product.

HAVE A QUESTION?

If you have a more general question about our products please try our

FAQ SECTION

RELATED PRODUCTS

Our Clients

  • Lear Corporation
  • Ford Motor Company
  • Visteon Corporation
  • Meritor, Inc.
  • BorgWarner Inc.
  • Pirelli & C. SpA