Mrs
Dr
Miss
Ms
Prof
Printer Friendly
Printed from http://www.researchandmarkets.com/reports/358045
U.S. Radiation-Curable Adhesives Market
Description:
New Wave Of Technologies Challenge Solvent-Based Systems
Stringent regulations from the U.S. Environmental Protection Agency (EPA) are forcing manufacturers in a wide range of industries to switch from solvent-based adhesives to newer, environmentally-friendly technologies. Consequently, demand for radiation-curable adhesives, which do not emit volatile organic compounds (VOCs), should see substantial growth over the forecast period. Improved product performance and faster cure rates will further help radiation-curable adhesives replace solvent-based formulations.
This Frost & Sullivan report analyzes the markets for ultraviolet (UV)-and electron beam (EB)-curable adhesives. By evaluating industry drivers and restraints as well as environmental regulations, it offers users an up-to-date guide to the future of the marketplace.
Innovative Products Determine Market Leaders
Despite the increasing popularity of radiation-curable adhesives, the industry as a whole continues to face imposing technical challenges, states the reports author. In some bonding situations, for example, it is difficult to get light, or radiation, to the adhesive for curing. Without a direct path for the light to reach the adhesive, curing is impossible. By focusing on research and development to create new procedures by which light can be integrated into the adhesive curing process, manufacturers stand to greatly increase their market share. This report tracks research and development trends and highlights key market opportunities that companies will face, helping your firm devise an effective business plan.
Client Education: Top Priority For Successful Companies
Even with the push to use environmentally-friendly adhesives, many potential consumers of radiation-curable solutions remain unaware of these alternative adhesives. Some end users believe that radiation-curable adhesives do not perform as well and are more expensive than solvent- or water-based formulations, says the author.
Manufacturers must devote sufficient resources to consumer education. Emphasizing the cost and performance advantages while dispelling myths should help motivate companies to replace their current systems. This report discusses end-user concerns and provides effective strategic recommendations, allowing your company to gear its efforts toward meeting client needs and maximizing gains.
Stringent regulations from the U.S. Environmental Protection Agency (EPA) are forcing manufacturers in a wide range of industries to switch from solvent-based adhesives to newer, environmentally-friendly technologies. Consequently, demand for radiation-curable adhesives, which do not emit volatile organic compounds (VOCs), should see substantial growth over the forecast period. Improved product performance and faster cure rates will further help radiation-curable adhesives replace solvent-based formulations.
This Frost & Sullivan report analyzes the markets for ultraviolet (UV)-and electron beam (EB)-curable adhesives. By evaluating industry drivers and restraints as well as environmental regulations, it offers users an up-to-date guide to the future of the marketplace.
Innovative Products Determine Market Leaders
Despite the increasing popularity of radiation-curable adhesives, the industry as a whole continues to face imposing technical challenges, states the reports author. In some bonding situations, for example, it is difficult to get light, or radiation, to the adhesive for curing. Without a direct path for the light to reach the adhesive, curing is impossible. By focusing on research and development to create new procedures by which light can be integrated into the adhesive curing process, manufacturers stand to greatly increase their market share. This report tracks research and development trends and highlights key market opportunities that companies will face, helping your firm devise an effective business plan.
Client Education: Top Priority For Successful Companies
Even with the push to use environmentally-friendly adhesives, many potential consumers of radiation-curable solutions remain unaware of these alternative adhesives. Some end users believe that radiation-curable adhesives do not perform as well and are more expensive than solvent- or water-based formulations, says the author.
Manufacturers must devote sufficient resources to consumer education. Emphasizing the cost and performance advantages while dispelling myths should help motivate companies to replace their current systems. This report discusses end-user concerns and provides effective strategic recommendations, allowing your company to gear its efforts toward meeting client needs and maximizing gains.
Contents:
Executive Summary
Introduction to the U.S. Radiation-curable adhesives market
Summary of Major Findings
Market Engineering Research Methodology
Research Scope
Research Methodology
Market Engineering Forecasting Methodology
Industry Definitions
Industry Challenges
Identification of Challenges Facing the U.S. Radiation-curable Adhesives Industry
Market Engineering Measurement Analysis of the Total U.S. Radiation-curable Adhesives Industry
Introduction
Market Engineering Research Measurement System
Market Engineering Research for the U.S. UV-curable Adhesives Market 2000-2005
Total Market Segment Analysis
Strategic Analysis and Forecasts of the UV-curable Structural Adhesives Market
Strategic Analysis and Forecasts of the UV-Curable Pressure-sensitive Adhesives Market
Strategic Analysis and Forecasts of the UV-Curable Laminating Adhesives Market
Market Engineering Research for the U.S. EB-curable Adhesives Market 2000-2005
Total Market Segment Analysis
Market Engineering Strategy
What Is Market Engineering Strategy?
Market Engineering Strategic Recommendations
Market Engineering Planning
Integrating Market Engineering into the Business Planning Process
Implementation of Market Engineering
How to Implement Market Engineering in a Company
Market Engineering Monitoring of the U.S. Radiation-cured Adhesives and Coatings Market
Purpose of Market Engineering Monitoring
Market Engineering Awards for the U.S. Radiation-curable Adhesives Market
Frost & Sullivans 2001 Market Engineering Awards
Market Engineering Awards
Table of Figures
Table of Charts
Introduction to the U.S. Radiation-curable adhesives market
Summary of Major Findings
Market Engineering Research Methodology
Research Scope
Research Methodology
Market Engineering Forecasting Methodology
Industry Definitions
Industry Challenges
Identification of Challenges Facing the U.S. Radiation-curable Adhesives Industry
Market Engineering Measurement Analysis of the Total U.S. Radiation-curable Adhesives Industry
Introduction
Market Engineering Research Measurement System
Market Engineering Research for the U.S. UV-curable Adhesives Market 2000-2005
Total Market Segment Analysis
Strategic Analysis and Forecasts of the UV-curable Structural Adhesives Market
Strategic Analysis and Forecasts of the UV-Curable Pressure-sensitive Adhesives Market
Strategic Analysis and Forecasts of the UV-Curable Laminating Adhesives Market
Market Engineering Research for the U.S. EB-curable Adhesives Market 2000-2005
Total Market Segment Analysis
Market Engineering Strategy
What Is Market Engineering Strategy?
Market Engineering Strategic Recommendations
Market Engineering Planning
Integrating Market Engineering into the Business Planning Process
Implementation of Market Engineering
How to Implement Market Engineering in a Company
Market Engineering Monitoring of the U.S. Radiation-cured Adhesives and Coatings Market
Purpose of Market Engineering Monitoring
Market Engineering Awards for the U.S. Radiation-curable Adhesives Market
Frost & Sullivans 2001 Market Engineering Awards
Market Engineering Awards
Table of Figures
Table of Charts
Ordering:
Order Online - visit http://www.researchandmarkets.com/reports/1582661
Order by Fax - using the order form below
Order By Post - print the order form below and send to
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Page 1 of 2
Printed Tuesday, May 21, 2013
2:10:29 PM
2:10:29 PM
Fax order form
To place a fax order simply print this form, fill in and fax the completed form to the number below. If you have any questions please email help@researchandmarkets.net
Order information
Please verify that the product information is correct and select the format you require.
Product name
U.S. Radiation-Curable Adhesives Market
Web Address
http://www.researchandmarkets.com/reports/358045
Office Code
OC8DIQSQLSUTTR
Report Formats
Please enter the quantity of the report format you require.
| Format | Quantity | Price | Electronic - Site License |
|
EURO€ 2,029.00 |
|---|---|---|
| Electronic - Enterprisewide |
|
EURO€ 3,182.00 |
| Electronic and Hard Copy (PDF) - Enterprisewide |
|
EURO€ 3,567.00 + EUR€ 50.00 Shipping/Handling * |
| Electronic and Hard Copy (PDF) - Site License |
|
EURO€ 2,414.00 + EUR€ 50.00 Shipping/Handling * |
* Shipping/Handling is only charged once per order.
Contact information
Please enter all the information below in block capitals.
Title:
Mr
Mrs
Dr
Miss
Ms
Prof
Mrs
Dr
Miss
Ms
Prof
First Name:
Last Name:
Email Address:
Job Title:
Organisation:
Address:
City:
Postal / Zip Code:
Country:
Phone Number:
Fax Number:
Please fax this form to:
(646) 607-1907 or (646) 964-6609 (from USA)
+353-1-481-1716 or +353-1-653-1571 (from Rest of World)
Page 2 of 2
Printed Tuesday, May 21, 2013
2:10:29 PM
2:10:29 PM
Payment information
Please indicate the payment method you would like to use by selecting the appropriate box.
Pay by Credit Card:
American Express
Diners Club
Master Card
Visa
Cardholder's Name:
Cardholder's Signature:
Expiry Date:
/
Card Number:
CVV Security Code:
Issue date:
/ (Diners Club only)
Pay by Check:
Please post the check, accompanied by this form, to:
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Pay by Wire Transfer:
Please transfer funds to:
Account Number:
83313083
Sort Code:
98-53-30
Swift Code:
ULSBIE2D
IBAN Number:
IE78ULSB98533083313083
Bank Address:
Ulster Bank,
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
27-35 Main Street
Blackrock,
Co. Dublin
Ireland.
If you have a Marketing Code please enter it below:
Marketing Code:
Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at http://www.researchandmarkets.com/info/terms.asp