The 2007-2012 Outlook for Household Sewing Machines and Heads in Japan
ICON Group International, September 2006, Pages: 115
WHAT IS LATENT DEMAND AND THE P.I.E.?
The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if Japan is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).
The latent demand for household sewing machines and heads in Japan is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a market.
For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends). If inflation rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand.
As mentioned in the introduction, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. In fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be latent demand for household sewing machines and heads at the aggregate level. Product and service offerings, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand.
THE METHODOLOGY
In order to estimate the latent demand for household sewing machines and heads across the prefectures and cites of Japan, we used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, we heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a prefecture, city, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium is realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question.
Ignoring, for the moment, exogenous shocks and variations in utility across geographies, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled "A" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data). This type of consumption function is shown as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant.
Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles. In the long-run, however, the propensity to consume is more constant. Similarly, in the long run, households with no income eventually have no consumption (wealth is depleted). While the debate surrounding beliefs about how income and consumption are related is interesting, in this study a very particular school of thought is adopted. In particular, we are considering the latent demand for household sewing machines and heads across the prefectures and cities of Japan. The smallest cities have few inhabitants. we assume that all of these cities fall along a "long-run" aggregate consumption function. This long-run function applies despite some of these prefectures having wealth; current income dominates the latent demand for household sewing machines and heads. So, latent demand in the long-run has a zero intercept. However, we allow different propensities to consume (including being on consumption functions with differing slopes, which can account for differences in industrial organization, and end-user preferences).
Given this overriding philosophy, we will now describe the methodology used to create the latent demand estimates for household sewing machines and heads in Japan. Since this methodology has been applied to a large number of categories, the rather academic discussion below is general and can be applied to a wide variety of categories and geographic locations, not just household sewing machines and heads in Japan.
Step 1. Product Definition and Data Collection
Any study of latent demand requires that some standard be established to define “efficiently served”. Having implemented various alternatives and matched these with market outcomes, we have found that the optimal approach is to assume that certain key indicators are more likely to reflect efficiency than others. These indicators are given greater weight than others in the estimation of latent demand compared to others for which no known data are available. Of the many alternatives, we have found the assumption that the highest aggregate income and highest income-per-capita markets reflect the best standards for “efficiency”. High aggregate income alone is not sufficient (i.e. some cities have high aggregate income, but low income per capita and can not assumed to be efficient). Aggregate income can be operationalized in a number of ways, including gross domestic product (for industrial categories), or total disposable income (for household categories; population times average income per capita, or number of households times average household income).
Latent demand is therefore estimated using data collected for relatively efficient markets from independent data sources (e.g. Official Chinese Agencies, the World Resources Institute, the Organization for Economic Cooperation and Development, various agencies from the United Nations, industry trade associations, the International Monetary Fund, Euromonitor, Mintel, Thomson Financial Services, the U.S. Industrial Outlook, and the World Bank). Depending on original data sources used, the definition of “household sewing machines and heads” is established. In the case of this report, the data were reported at the aggregate level, with no further breakdown or definition. In other words, any potential product or service that might be incorporated within household sewing machines and heads falls under this category. Public sources rarely report data at the disaggregated level in order to protect private information from individual firms that might dominate a specific product-market. These sources will therefore aggregate across components of a category and report only the aggregate to the public. While private data are certainly available, this report only relies on public data at the aggregate level without reliance on the summation of various category components. In other words, this report does not aggregate a number of components to arrive at the “whole”. Rather, it starts with the “whole”, and estimates the whole for all prefectures and cities in Japan (without needing to know the specific parts that went into the whole in the first place).
Given this caveat, this study covers “household sewing machines and heads” as defined by the NAICS coding system (pronounced “nakes”). For a complete definition of household sewing machines and heads, please see below. The NAICS code for household sewing machines and heads is 33329871R1. It is for this definition of household sewing machines and heads that the aggregate latent demand estimates are derived for the prefectures and cities of Japan.
Step 2. Filtering and Smoothing
Based on the aggregate view of household sewing machines and heads as defined above, data were then collected for as many geographic locations as possible for that same definition, at the same level of the value chain. This generates a convenience sample of indicators from which comparable figures are available. If the series in question do not reflect the same accounting period, then adjustments are made. In order to eliminate short-term effects of business cycles, the series are smoothed using an 2 year moving average weighting scheme (longer weighting schemes do not substantially change the results). If data are available for a geographic region, but these reflect short-run aberrations due to exogenous shocks (such as would be the case of beef sales in a prefecture or city stricken with foot and mouth disease), these observations were dropped or "filtered" from the analysis.
Step 3. Filling in Missing Values
In some cases, data are available on a sporadic basis. In other cases, data may be available for only one year. From a Bayesian perspective, these observations should be given greatest weight in estimating missing years. Assuming that other factors are held constant, the missing years are extrapolated using changes and growth in aggregate national, prefecture and city-level income. Based on the overriding philosophy of a long-run consumption function (defined earlier), prefectures and cities which have missing data for any given year, are estimated based on historical dynamics of aggregate income for that geographic entity.
Step 4. Varying Parameter, Non-linear Estimation
Given the data available from the first three steps, the latent demand is estimated using a “varying-parameter cross-sectionally pooled time series model”. Simply stated, the effect of income on latent demand is assumed to be constant unless there is empirical evidence to suggest that this effect varies (i.e., . the slope of the income effect is not necessarily same for all prefectures or cities). This assumption applies along the aggregate consumption function, but also over time (i.e., not all prefectures or cities in Japan are perceived to have the same income growth prospects over time). Another way of looking at this is to say that latent demand for household sewing machines and heads is more likely to be similar across prefectures or cities that have similar characteristics in terms of economic development.
This approach is useful across geographic regions for which some notion of non-linearity exists in the aggregate cross-region consumption function. For some categories, however, the reader must realize that the numbers will reflect a prefecture’s or city’s contribution to latent demand in Japan and may never be realized in the form of local sales.
Step 5. Fixed-Parameter Linear Estimation
Nonlinearities are assumed in cases where filtered data exist along the aggregate consumption function. Because Japan consists of more than 1,000 cities, there will always be those cities, especially toward the bottom of the consumption function, where non-linear estimation is simply not possible. For these cities, equilibrium latent demand is assumed to be perfectly parametric and not a function of wealth (i.e., a city’s stock of income), but a function of current income (a city’s flow of income). In the long run, if a prefecture has no current income, the latent demand for household sewing machines and heads is assumed to approach zero. The assumption is that wealth stocks fall rapidly to zero if flow income falls to zero (i.e., cities which earn low levels of income will not use their savings, in the long run, to demand household sewing machines and heads). In a graphical sense, for low income cities, latent demand approaches zero in a parametric linear fashion with a zero-zero intercept. In this stage of the estimation procedure, a low-income city is assumed to have a latent demand proportional to its income, based on the cities closest to it on the aggregate consumption function.
Step 6. Aggregation and Benchmarking
Based on the models described above, latent demand figures are estimated for all major cities in Japan. These are then aggregated to get prefecture totals. This report considers a city as a part of the regional and national market. The purpose is to understand the density of demand within a prefecture and the extent to which a city might be used as a point of distribution within its prefecture. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another. we allocate latent demand across areas of dominant influence based on the relative economic importance of cities within its prefecture. Not all cities (e.g. the smaller towns) are estimated within each prefecture as demand may be allocated to adjacent areas of influence. Since some cities have higher economic wealth than others within the same prefecture, a city’s population is not generally used to allocate latent demand. Rather, the level of economic activity of the city vis-à-vis others
1 INTRODUCTION 10
1.1 Overview 10
1.2 What is Latent Demand and the P.I.E.? 10
1.3 The Methodology 11
1.3.1 Step 1. Product Definition and Data Collection 12
1.3.2 Step 2. Filtering and Smoothing 13
1.3.3 Step 3. Filling in Missing Values 13
1.3.4 Step 4. Varying Parameter, Non-linear Estimation 13
1.3.5 Step 5. Fixed-Parameter Linear Estimation 14
1.3.6 Step 6. Aggregation and Benchmarking 14
2 SUMMARY OF FINDINGS 15
2.1 The Latent Demand in Japan 15
2.2 Top 100 Cities Sorted by Rank 17
3 AICHI 20
3.1 Latent Demand by Year - Aichi 20
3.2 Cities Sorted by Rank - Aichi 21
3.3 Cities Sorted Alphabetically - Aichi 21
4 AKITA 22
4.1 Latent Demand by Year - Akita 22
4.2 Cities Sorted by Rank - Akita 23
4.3 Cities Sorted Alphabetically - Akita 23
5 AOMORI 24
5.1 Latent Demand by Year - Aomori 24
5.2 Cities Sorted by Rank - Aomori 25
5.3 Cities Sorted Alphabetically - Aomori 25
6 CHIBA 26
6.1 Latent Demand by Year - Chiba 26
6.2 Cities Sorted by Rank - Chiba 27
6.3 Cities Sorted Alphabetically - Chiba 27
7 EHIME 28
7.1 Latent Demand by Year - Ehime 28
7.2 Cities Sorted by Rank - Ehime 29
7.3 Cities Sorted Alphabetically - Ehime 29
8 FUKUI 30
8.1 Latent Demand by Year - Fukui 30
8.2 Cities Sorted by Rank - Fukui 31
8.3 Cities Sorted Alphabetically - Fukui 31
9 FUKUOKA 32
9.1 Latent Demand by Year - Fukuoka 32
9.2 Cities Sorted by Rank - Fukuoka 33
9.3 Cities Sorted Alphabetically - Fukuoka 33
10 FUKUSHIMA 34
10.1 Latent Demand by Year - Fukushima 34
10.2 Cities Sorted by Rank - Fukushima 35
10.3 Cities Sorted Alphabetically - Fukushima 35
11 GIFU 36
11.1 Latent Demand by Year - Gifu 36
11.2 Cities Sorted by Rank - Gifu 37
11.3 Cities Sorted Alphabetically - Gifu 37
12 GUMMA 38
12.1 Latent Demand by Year - Gumma 38
12.2 Cities Sorted by Rank - Gumma 39
12.3 Cities Sorted Alphabetically - Gumma 39
13 HIROSHIMA 40
13.1 Latent Demand by Year - Hiroshima 40
13.2 Cities Sorted by Rank - Hiroshima 41
13.3 Cities Sorted Alphabetically - Hiroshima 41
14 HOKKAIDO 42
14.1 Latent Demand by Year - Hokkaido 42
14.2 Cities Sorted by Rank - Hokkaido 43
14.3 Cities Sorted Alphabetically - Hokkaido 43
15 HYOGO 44
15.1 Latent Demand by Year - Hyogo 44
15.2 Cities Sorted by Rank - Hyogo 45
15.3 Cities Sorted Alphabetically - Hyogo 45
16 IBARAKI 46
16.1 Latent Demand by Year - Ibaraki 46
16.2 Cities Sorted by Rank - Ibaraki 47
16.3 Cities Sorted Alphabetically - Ibaraki 47
17 ISHIKAWA 48
17.1 Latent Demand by Year - Ishikawa 48
17.2 Cities Sorted by Rank - Ishikawa 49
17.3 Cities Sorted Alphabetically - Ishikawa 49
18 IWATE 50
18.1 Latent Demand by Year - Iwate 50
18.2 Cities Sorted by Rank - Iwate 51
18.3 Cities Sorted Alphabetically - Iwate 51
19 KAGAWA 52
19.1 Latent Demand by Year - Kagawa 52
19.2 Cities Sorted by Rank - Kagawa 53
19.3 Cities Sorted Alphabetically - Kagawa 53
20 KAGOSHIMA 54
20.1 Latent Demand by Year - Kagoshima 54
20.2 Cities Sorted by Rank - Kagoshima 55
20.3 Cities Sorted Alphabetically - Kagoshima 55
21 KANAGAWA 56
21.1 Latent Demand by Year - Kanagawa 56
21.2 Cities Sorted by Rank - Kanagawa 57
21.3 Cities Sorted Alphabetically - Kanagawa 57
22 KOCHI 58
22.1 Latent Demand by Year - Kochi 58
22.2 Cities Sorted by Rank - Kochi 59
22.3 Cities Sorted Alphabetically - Kochi 59
23 KUMAMOTO 60
23.1 Latent Demand by Year - Kumamoto 60
23.2 Cities Sorted by Rank - Kumamoto 61
23.3 Cities Sorted Alphabetically - Kumamoto 61
24 KYOTO 62
24.1 Latent Demand by Year - Kyoto 62
24.2 Cities Sorted by Rank - Kyoto 63
24.3 Cities Sorted Alphabetically - Kyoto 63
25 MIE 64
25.1 Latent Demand by Year - Mie 64
25.2 Cities Sorted by Rank - Mie 65
25.3 Cities Sorted Alphabetically - Mie 65
26 MIYAGI 66
26.1 Latent Demand by Year - Miyagi 66
26.2 Cities Sorted by Rank - Miyagi 67
26.3 Cities Sorted Alphabetically - Miyagi 67
27 MIYAZAKI 68
27.1 Latent Demand by Year - Miyazaki 68
27.2 Cities Sorted by Rank - Miyazaki 69
27.3 Cities Sorted Alphabetically - Miyazaki 69
28 NAGANO 70
28.1 Latent Demand by Year - Nagano 70
28.2 Cities Sorted by Rank - Nagano 71
28.3 Cities Sorted Alphabetically - Nagano 71
29 NAGASAKI 72
29.1 Latent Demand by Year - Nagasaki 72
29.2 Cities Sorted by Rank - Nagasaki 73
29.3 Cities Sorted Alphabetically - Nagasaki 73
30 NARA 74
30.1 Latent Demand by Year - Nara 74
30.2 Cities Sorted by Rank - Nara 75
30.3 Cities Sorted Alphabetically - Nara 75
31 NIIGATA 76
31.1 Latent Demand by Year - Niigata 76
31.2 Cities Sorted by Rank - Niigata 77
31.3 Cities Sorted Alphabetically - Niigata 77
32 OITA 78
32.1 Latent Demand by Year - Oita 78
32.2 Cities Sorted by Rank - Oita 79
32.3 Cities Sorted Alphabetically - Oita 79
33 OKAYAMA 80
33.1 Latent Demand by Year - Okayama 80
33.2 Cities Sorted by Rank - Okayama 81
33.3 Cities Sorted Alphabetically - Okayama 81
34 OKINAWA 82
34.1 Latent Demand by Year - Okinawa 82
34.2 Cities Sorted by Rank - Okinawa 83
34.3 Cities Sorted Alphabetically - Okinawa 83
35 OSAKA 84
35.1 Latent Demand by Year - Osaka 84
35.2 Cities Sorted by Rank - Osaka 85
35.3 Cities Sorted Alphabetically - Osaka 85
36 SAGA 86
36.1 Latent Demand by Year - Saga 86
36.2 Cities Sorted by Rank - Saga 87
36.3 Cities Sorted Alphabetically - Saga 87
37 SAITAMA 88
37.1 Latent Demand by Year - Saitama 88
37.2 Cities Sorted by Rank - Saitama 89
37.3 Cities Sorted Alphabetically - Saitama 89
38 SHIGA 90
38.1 Latent Demand by Year - Shiga 90
38.2 Cities Sorted by Rank - Shiga 91
38.3 Cities Sorted Alphabetically - Shiga 91
39 SHIMANE 92
39.1 Latent Demand by Year - Shimane 92
39.2 Cities Sorted by Rank - Shimane 93
39.3 Cities Sorted Alphabetically - Shimane 93
40 SHIZUOKA 94
40.1 Latent Demand by Year - Shizuoka 94
40.2 Cities Sorted by Rank - Shizuoka 95
40.3 Cities Sorted Alphabetically - Shizuoka 95
41 TOCHIGI 96
41.1 Latent Demand by Year - Tochigi 96
41.2 Cities Sorted by Rank - Tochigi 97
41.3 Cities Sorted Alphabetically - Tochigi 97
42 TOKUSHIMA 98
42.1 Latent Demand by Year - Tokushima 98
42.2 Cities Sorted by Rank - Tokushima 99
42.3 Cities Sorted Alphabetically - Tokushima 99
43 TOKYO 100
43.1 Latent Demand by Year - Tokyo 100
43.2 Cities Sorted by Rank - Tokyo 101
43.3 Cities Sorted Alphabetically - Tokyo 101
44 TOTTORI 102
44.1 Latent Demand by Year - Tottori 102
44.2 Cities Sorted by Rank - Tottori 103
44.3 Cities Sorted Alphabetically - Tottori 103
45 TOYAMA 104
45.1 Latent Demand by Year - Toyama 104
45.2 Cities Sorted by Rank - Toyama 105
45.3 Cities Sorted Alphabetically - Toyama 105
46 WAKAYAMA 106
46.1 Latent Demand by Year - Wakayama 106
46.2 Cities Sorted by Rank - Wakayama 107
46.3 Cities Sorted Alphabetically - Wakayama 107
47 YAMAGATA 108
47.1 Latent Demand by Year - Yamagata 108
47.2 Cities Sorted by Rank - Yamagata 109
47.3 Cities Sorted Alphabetically - Yamagata 109
48 YAMAGUCHI 110
48.1 Latent Demand by Year - Yamaguchi 110
48.2 Cities Sorted by Rank - Yamaguchi 111
48.3 Cities Sorted Alphabetically - Yamaguchi 111
49 YAMANASHI 112
49.1 Latent Demand by Year - Yamanashi 112
49.2 Cities Sorted by Rank - Yamanashi 113
49.3 Cities Sorted Alphabetically - Yamanashi 113
50 DISCLAIMERS, WARRANTEES, AND USER AGREEMENT PROVISIONS 114
50.1 Disclaimers & Safe Harbor 114
50.2 User Agreement Provisions 115
Customers who bought this item also bought
All rights reserved. © Copyright 2013 Research and Markets WWW4
Terms and Conditions Privacy Policy Publishers Employment Opportunities Site Map Link to us Webmaster Affiliate Network
