EUR USD GBP
+353-1-416-8900REST OF WORLD
1-800-526-8630U.S. (TOLL FREE)

The 2007-2012 World Outlook for Women’s, Girls’, and Infants’ Straw Hats

  • ID: 490325
  • Report
  • May 2006
  • Region: Global
  • 186 pages
  • ICON Group International
1 of 3
WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for women’s, girls’, and infants’ straw hats is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends) and not adjusted for future dynamics in exchange rates (i.e., the figures reflect average exchange rates over recent history). If inflation rates or exchange rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (when expressed in U.S. dollars, not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand.

As mentioned in the introduction, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. If fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be an international latent demand for women’s, girls’, and infants’ straw hats at the aggregate level. Product and service offering details, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand.

THE METHODOLOGY

In order to estimate the latent demand for women’s, girls’, and infants’ straw hats on a worldwide basis, we used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, we heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a country, city, state, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium in realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question.

Ignoring, for the moment, exogenous shocks and variations in utility across countries, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled "A" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data across countries). This type of consumption function is show as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant.

Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles. In the long-run, however, the propensity to consume is more constant. Similarly, in the long run, households, industries or countries with no income eventually have no consumption (wealth is depleted). While the debate surrounding beliefs about how income and consumption are related and interesting, in this study a very particular school of thought is adopted. In particular, we are considering the latent demand for women’s, girls’, and infants’ straw hats across some 230 countries. The smallest have fewer than 10,000 inhabitants. we assume that all of these counties fall along a "long-run" aggregate consumption function. This long-run function applies despite some of these countries having wealth, current income dominates the latent demand for women’s, girls’, and infants’ straw hats. So, latent demand in the long-run has a zero intercept. However, we allow firms to have different propensities to consume (including being on consumption functions with differing slopes, which can account for differences in industrial organization, and end-user preferences).

Given this overriding philosophy, we will now describe the methodology used to create the latent demand estimates for women’s, girls’, and infants’ straw hats. Since this methodology has been applied to a large number of categories, the rather academic discussion below is general and can be applied to a wide variety of categories, not just women’s, girls’, and infants’ straw hats.

Step 1. Product Definition and Data Collection

Any study of latent demand across countries requires that some standard be established to define “efficiently served”. Having implemented various alternatives and matched these with market outcomes, we have found that the optimal approach is to assume that certain key countries are more likely to be at or near efficiency than others. These countries are given greater weight than others in the estimation of latent demand compared to other countries for which no known data are available. Of the many alternatives, we have found the assumption that the world’s highest aggregate income and highest income-per-capita markets reflect the best standards for “efficiency”. High aggregate income alone is not sufficient (i.e., China has high aggregate income, but low income per capita and can not assumed to be efficient). Aggregate income can be operationalized in a number of ways, including gross domestic product (for industrial categories), or total disposable income (for household categories; population times average income per capita, or number of households times average household income per capita). Brunei, Nauru, Kuwait, and Lichtenstein are examples of countries with high income per capita, but not assumed to be efficient, given low aggregate level of income (or gross domestic product); these countries have, however, high incomes per capita but may not benefit from the efficiencies derived from economies of scale associated with large economies. Only countries with high income per capita and large aggregate income are assumed efficient. This greatly restricts the pool of countries to those in the OECD (Organization for Economic Cooperation and Development), like the United States, or the United Kingdom (which were earlier than other large OECD economies to liberalize their markets).

The selection of countries is further reduced by the fact that not all countries in the OECD report industry revenues at the category level. Countries that typically have ample data at the aggregate level that meet the efficiency criteria include the United States, the United Kingdom and in some cases France and Germany.

Latent demand is therefore estimated using data collected for relatively efficient markets from independent data sources (e.g. Euromonitor, Mintel, Thomson Financial Services, the U.S. Industrial Outlook, the World Resources Institute, the Organization for Economic Cooperation and Development, various agencies from the United Nations, industry trade associations, the International Monetary Fund, and the World Bank). Depending on original data sources used, the definition of “women’s, girls’, and infants’ straw hats” is established. In the case of this report, the data were reported at the aggregate level, with no further breakdown or definition. In other words, any potential product or service that might be incorporated within women’s, girls’, and infants’ straw hats falls under this category. Public sources rarely report data at the disaggregated level in order to protect private information from individual firms that might dominate a specific product-market. These sources will therefore aggregate across components of a category and report only the aggregate to the public. While private data are certainly available, this report only relies on public data at the aggregate level without reliance on the summation of various category components. In other words, this report does not aggregate a number of components to arrive at the “whole”. Rather, it starts with the “whole”, and estimates the whole for all countries and the world at large (without needing to know the specific parts that went into the whole in the first place).

Given this caveat, this study covers “women’s, girls’, and infants’ straw hats” as defined by the North American Industrial Classification system or NAICS (pronounced “nakes”). For a complete definition of women’s, girls’, and infants’ straw hats, please see below. The NAICS code for women’s, girls’, and infants’ straw hats is 31599152. It is for this definition of women’s, girls’, and infants’ straw hats that the aggregate latent demand estimates are derived. “Women’s, girls’, and infants’ straw hats” is specifically defined as follows:

31599152
women’s, girls’, and infants’ straw hats

3159915216
women’s, girls’, and infants’ straw hats

Step 2. Filtering and Smoothing

Based on the aggregate view of women’s, girls’, and infants’ straw hats as defined above, data were then collected for as many similar countries as possible for that same definition, at the same level of the value chain. This generates a convenience sample of countries from which comparable figures are available. If the series in question do not reflect the same accounting period, then adjustments are made. In order to eliminate short-term effects of business cycles, the series are smoothed using an 2 year moving average weighting scheme (longer weighting schemes do not substantially change the results). If data are available for a country, but these reflect short-run aberrations due to exogenous shocks (such as would be the case of beef sales in a country stricken with foot and mouth disease), these observations were dropped or "filtered" from the analysis.

Step 3. Filling in Missing Values

In some cases, data are available for countries on a sporadic basis. In other cases, data from a country may be available for only one year. From a Bayesian perspective, these observations should be given greatest weight in estimating missing years. Assuming that other factors are held constant, the missing years are extrapolated using changes and growth in aggregate national income. Based on the overriding philosophy of a long-run consumption function (defined earlier), countries which have missing data for any given year, are estimated based on historical dynamics of aggregate income for that country.

Step 4. Varying Parameter, Non-linear Estimation

Given the data available from the first three steps, the latent demand in additional countries is estimated using a “varying-parameter cross-sectionally pooled time series model”. Simply stated, the effect of income on latent demand is assumed to be constant across countries unless there is empirical evidence to suggest that this effect varies (i.e., . the slope of the income effect is not necessarily same for all countries). This assumption applies across countries along the aggregate consumption function, but also over time (i.e., not all countries are perceived to have the same income growth prospects over time and this effect can vary from country to country as well). Another way of looking at this is to say that latent demand for women’s, girls’, and infants’ straw hats is more likely to be similar across countries that have similar characteristics in terms of economic development (i.e., African countries will have similar latent demand structures controlling for the income variation across the pool of African countries).

This approach is useful across countries for which some notion of non-linearity exists in the aggregate cross-country consumption function. For some categories, however, the reader must realize that the numbers will reflect a country’s contribution to global latent demand and may never be realized in the form of local sales. For certain country-category combinations this will result in what at first glance will be odd results. For example, the latent demand for the category “space vehicles” will exist for “Togo” even though they have no space program. The assumption is that if the economies in these countries did not exist, the world aggregate for these categories would be lower. The share attributed to these countries is based on a proportion of their income (however small) being used to consume the category in question (i.e., perhaps via resellers).

Step 5. Fixed-Parameter Linear Estimation

Nonlinearities are assumed in cases where filtered data exist along the aggregate consumption function. Because the world consists of more than 200 countries, there will always be those countries, especially toward the bottom of the consumption function, where non-linear estimation is simply not possible. For these countries, equilibrium latent demand is assumed to be perfectly parametric and not a function of wealth (i.e., a country’s stock of income), but a function of current income (a country’s flow of income). In the long run, if a country has no current income, the latent demand for women’s, girls’, and infants’ straw hats is assumed to approach zero. The assumption is that wealth stocks fall rapidly to zero if flow income falls to zero (i.e., countries which earn low levels of income will not use their savings, in the long run, to demand women’s, girls’, and infants’ straw hats). In a graphical sense, for low income countries, latent demand approaches zero in a parametric linear fashion with a zero-zero intercept. In this stage of the estimation procedure, low-income countries are assumed to have a latent demand proportional to their income, based on the country closest to it on the aggregate consumption function.

Step 6. Aggregation and Benchmarking

Based on the models described above, latent demand figures are estimated for all countries of the world, including for the smallest economies. These are then aggregated to get world totals and regional totals. To make the numbers more meaningful, regional and global demand averages are presented. Figures are rounded, so minor inconsistencies may exist across tables.

Step 7. Latent Demand Density: Allocating Across Cities

With the advent of a “borderless world”, cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report also covers the world’s top 2000 cities. The purpose is to understand the density of demand within a country and the extent to which a city might be used as a point of distribution within its region. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another.

Similar to country-level data, the reader needs to realize that latent demand allocated to a city may or may not represent real sales. For many items, latent demand is clearly observable in sales, as in the case for food or housing items. Consider, again, the category “satellite launch vehicles.” Clearly, there are no launch pads in most cities of the world. However, the core benefit of the vehicles (e.g. telecommunications, etc.) is "consumed" by residents or industries within the worlds cities. Without certain cities, in other words, the world market for satellite launch vehicles would be lower for the world in general. One needs to allocate, therefore, a portion of the worldwide economic demand for launch vehicles to regions, countries and cities. This report takes the broader definition and considers, therefore, a city as a part of the global market. we allocate latent demand across areas of dominant influence based on the relative economic importance of cities within its home country, within its region and across the world total. Not all cities are estimated within each country as demand may be allocated to adjacent areas of influence. Since some cities have higher economic wealth than others within the same country, a city’s population is not generally used to allocate latent demand. Rather, the level of economic activity of the city vis-à-vis others.
READ MORE
Note: Product cover images may vary from those shown
2 of 3
1 INTRODUCTION 10
1.1 Overview 10
1.2 What is Latent Demand and the P.I.E.? 10
1.3 The Methodology 11
1.3.1 Step 1. Product Definition and Data Collection 12
1.3.2 Step 2. Filtering and Smoothing 13
1.3.3 Step 3. Filling in Missing Values 14
1.3.4 Step 4. Varying Parameter, Non-linear Estimation 14
1.3.5 Step 5. Fixed-Parameter Linear Estimation 15
1.3.6 Step 6. Aggregation and Benchmarking 15
1.3.7 Step 7. Latent Demand Density: Allocating Across Cities 15
2 SUMMARY OF FINDINGS 16
2.1 The Worldwide Market Potential 16
3 AFRICA & THE MIDDLE EAST 18
3.1 Executive Summary 18
3.2 Afghanistan 19
3.3 Algeria 20
3.4 Angola 21
3.5 Armenia 21
3.6 Azerbaijan 22
3.7 Bahrain 23
3.8 Benin 24
3.9 Botswana 24
3.10 Burkina Faso 25
3.11 Burundi 26
3.12 Cameroon 26
3.13 Cape Verde 27
3.14 Central African Republic 28
3.15 Chad 28
3.16 Comoros 29
3.17 Congo (formerly Zaire) 30
3.18 Cote dIvoire 31
3.19 Djibouti 31
3.20 Egypt 32
3.21 Equatorial Guinea 33
3.22 Ethiopia 33
3.23 Gabon 34
3.24 Ghana 35
3.25 Guinea 35
3.26 Guinea-Bissau 36
3.27 Iran 37
3.28 Iraq 38
3.29 Israel 39
3.30 Jordan 39
3.31 Kenya 40
3.32 Kuwait 41
3.33 Kyrgyzstan 41
3.34 Lebanon 42
3.35 Lesotho 43
3.36 Liberia 43
3.37 Libya 44
3.38 Madagascar 45
3.39 Malawi 45
3.40 Mali 46
3.41 Mauritania 47
3.42 Mauritius 47
3.43 Morocco 48
3.44 Mozambique 49
3.45 Namibia 49
3.46 Niger 50
3.47 Nigeria 51
3.48 Oman 52
3.49 Pakistan 52
3.50 Palestine 53
3.51 Qatar 54
3.52 Republic of Congo 54
3.53 Reunion 55
3.54 Rwanda 56
3.55 Sao Tome E Principe 56
3.56 Saudi Arabia 57
3.57 Senegal 58
3.58 Sierra Leone 58
3.59 Somalia 59
3.60 South Africa 60
3.61 Sudan 61
3.62 Swaziland 61
3.63 Syrian Arab Republic 62
3.64 Tajikistan 63
3.65 Tanzania 63
3.66 The Gambia 64
3.67 Togo 65
3.68 Tunisia 65
3.69 Turkey 66
3.70 Turkmenistan 67
3.71 Uganda 68
3.72 United Arab Emirates 68
3.73 Uzbekistan 69
3.74 Western Sahara 70
3.75 Yemen 70
3.76 Zambia 71
3.77 Zimbabwe 72
4 ASIA 73
4.1 Executive Summary 73
4.2 Bangladesh 74
4.3 Bhutan 75
4.4 Brunei 76
4.5 Burma 76
4.6 Cambodia 77
4.7 China 78
4.8 Hong Kong 79
4.9 India 79
4.10 Indonesia 80
4.11 Japan 81
4.12 Laos 82
4.13 Macau 83
4.14 Malaysia 84
4.15 Maldives 85
4.16 Mongolia 85
4.17 Nepal 86
4.18 North Korea 87
4.19 Papua New Guinea 88
4.20 Philippines 88
4.21 Seychelles 89
4.22 Singapore 90
4.23 South Korea 90
4.24 Sri Lanka 91
4.25 Taiwan 92
4.26 Thailand 93
4.27 Vietnam 93
5 EUROPE 95
5.1 Executive Summary 95
5.2 Albania 96
5.3 Andorra 97
5.4 Austria 97
5.5 Belarus 98
5.6 Belgium 99
5.7 Bosnia and Herzegovina 100
5.8 Bulgaria 101
5.9 Croatia 102
5.10 Cyprus 102
5.11 Czech Republic 103
5.12 Denmark 104
5.13 Estonia 105
5.14 Finland 105
5.15 France 106
5.16 Georgia 107
5.17 Germany 108
5.18 Greece 109
5.19 Hungary 109
5.20 Iceland 110
5.21 Ireland 111
5.22 Italy 111
5.23 Kazakhstan 112
5.24 Latvia 113
5.25 Liechtenstein 114
5.26 Lithuania 115
5.27 Luxembourg 115
5.28 Malta 116
5.29 Moldova 117
5.30 Monaco 117
5.31 Netherlands 118
5.32 Norway 119
5.33 Poland 119
5.34 Portugal 120
5.35 Romania 121
5.36 Russia 122
5.37 San Marino 123
5.38 Slovakia 123
5.39 Slovenia 124
5.40 Spain 125
5.41 Sweden 126
5.42 Switzerland 127
5.43 Ukraine 128
5.44 United Kingdom 129
6 LATIN AMERICA 130
6.1 Executive Summary 130
6.2 Argentina 131
6.3 Belize 132
6.4 Bolivia 133
6.5 Brazil 133
6.6 Chile 134
6.7 Colombia 135
6.8 Costa Rica 136
6.9 Ecuador 137
6.10 El Salvador 138
6.11 Falkland Islands 138
6.12 French Guiana 139
6.13 Guatemala 140
6.14 Guyana 140
6.15 Honduras 141
6.16 Mexico 142
6.17 Nicaragua 143
6.18 Panama 143
6.19 Paraguay 144
6.20 Peru 145
6.21 Suriname 146
6.22 Uruguay 146
6.23 Venezuela 147
7 NORTH AMERICA & THE CARIBBEAN 149
7.1 Executive Summary 149
7.2 Antigua and Barbuda 150
7.3 Aruba 151
7.4 Bahamas 152
7.5 Barbados 152
7.6 Bermuda 153
7.7 British Virgin Islands 154
7.8 Canada 154
7.9 Cayman Islands 155
7.10 Cuba 156
7.11 Dominica 157
7.12 Dominican Republic 157
7.13 Greenland 158
7.14 Grenada 159
7.15 Guadeloupe 160
7.16 Haiti 160
7.17 Jamaica 161
7.18 Martinique 162
7.19 Netherlands Antilles 162
7.20 Puerto Rico 163
7.21 St. Kitts and Nevis 164
7.22 St. Lucia 164
7.23 St. Vincent and the Grenadines 165
7.24 Trinidad and Tobago 166
7.25 United States 166
7.26 Virgin Islands, US 167
8 OCEANA 169
8.1 Executive Summary 169
8.2 American Samoa 170
8.3 Australia 171
8.4 Christmas Island 172
8.5 Cook Islands 172
8.6 Fiji 173
8.7 French Polynesia 173
8.8 Guam 174
8.9 Kiribati 175
8.10 Marshall Islands 175
8.11 Micronesia Federation 176
8.12 Nauru 176
8.13 New Caledonia 177
8.14 New Zealand 177
8.15 Niue 178
8.16 Norfolk Island 179
8.17 Northern Mariana Island 179
8.18 Palau 180
8.19 Solomon Islands 180
8.20 Tokelau 181
8.21 Tonga 181
8.22 Tuvalu 182
8.23 Vanuatu 182
8.24 Wallis and Futuna 183
8.25 Western Samoa 183
9 DISCLAIMERS, WARRANTEES, AND USER AGREEMENT PROVISIONS 185
9.1 Disclaimers & Safe Harbor 185
9.2 User Agreement Provisions 186

Note: Product cover images may vary from those shown
3 of 3
Note: Product cover images may vary from those shown
Adroll
adroll