The Latin America, Middle East and Africa Automotive Charge Air Cooler Market should witness market growth of 9.8% CAGR during the forecast period (2022-2028).
There are clear thermodynamic correlations between the ratios of density, pressure, and temperature for various compressor efficiencies. It is challenging to achieve the intake charge air densities given in the fig without charge air cooling. The efficiency of the charge air cooler and the pressure drop from the intake manifold to the compressor discharge determine how the charge air cooling affects the density ratio.
When designing a heat exchange, it is important to take into account both the rates of heat transfer between the mechanical pumping power and the fluids required to transfer the fluids through the heat exchanger and overcome fluid friction. Because the friction power expenditure for a heat exchanger working with high-density fluids is typically low in comparison to the heat transfer rate, friction power expenditure is rarely a deciding factor.
However, it is relatively simple to use as much mechanical energy to overcome friction power as is transmitted as heat for low-density fluids like gas. Additionally, keep in mind that in the majority of thermal power systems, mechanical energy is valued four to ten times higher than its counterpart in heat.
Argentina has passed a resolution on energy efficiency for the labelling of light duty cars that mandates the declaration of fuel consumption for each new vehicle model beginning in 2018, followed by the creation and application of an energy efficiency vehicle badge beginning in 2019. This is the outcome of a cooperative effort between the UNEP and the Argentine Ministry of Environment and Development to increase the fuel efficiency of the nation's fleet of vehicles with assistance from the Global Fuel Economy Initiative (GFEI).
The Brazil market dominated the LAMEA Automotive Charge Air Cooler Market by Country 2021, and would continue to be a dominant market till 2028; thereby, achieving a market value of $317.7 million by 2028. The Argentina market is experiencing a CAGR of 10.4% during (2022-2028). Additionally, The UAE market would display a CAGR of 9.5% during (2022-2028).
Based on Product Type, the market is segmented into Air-cooled and Liquid-cooled. Based on Fuel Type, the market is segmented into Diesel and Gasoline. Based on Vehicle Type, the market is segmented into Passenger Vehicles, Light Commercial Vehicles, Heavy Commercial Vehicles and Others. Based on Design Type, the market is segmented into Fin & Tube and Bar & Plate. Based on Position Type, the market is segmented into Standalone and Integrated. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Dana Incorporated, Valeo SA, Mahle GmbH (Mahle Stiftung GmbH), Hanon Systems (Hahn & Co. Auto Holdings Co., Ltd.), T.RAD Co., Ltd., Modine Manufacturing Company, Banco Products (India) Ltd., AKG Group, Sterling Thermal Technology Limited (Nova Capital Gp Investments Xi Lp), and C, G, & J, Inc.
There are clear thermodynamic correlations between the ratios of density, pressure, and temperature for various compressor efficiencies. It is challenging to achieve the intake charge air densities given in the fig without charge air cooling. The efficiency of the charge air cooler and the pressure drop from the intake manifold to the compressor discharge determine how the charge air cooling affects the density ratio.
When designing a heat exchange, it is important to take into account both the rates of heat transfer between the mechanical pumping power and the fluids required to transfer the fluids through the heat exchanger and overcome fluid friction. Because the friction power expenditure for a heat exchanger working with high-density fluids is typically low in comparison to the heat transfer rate, friction power expenditure is rarely a deciding factor.
However, it is relatively simple to use as much mechanical energy to overcome friction power as is transmitted as heat for low-density fluids like gas. Additionally, keep in mind that in the majority of thermal power systems, mechanical energy is valued four to ten times higher than its counterpart in heat.
Argentina has passed a resolution on energy efficiency for the labelling of light duty cars that mandates the declaration of fuel consumption for each new vehicle model beginning in 2018, followed by the creation and application of an energy efficiency vehicle badge beginning in 2019. This is the outcome of a cooperative effort between the UNEP and the Argentine Ministry of Environment and Development to increase the fuel efficiency of the nation's fleet of vehicles with assistance from the Global Fuel Economy Initiative (GFEI).
The Brazil market dominated the LAMEA Automotive Charge Air Cooler Market by Country 2021, and would continue to be a dominant market till 2028; thereby, achieving a market value of $317.7 million by 2028. The Argentina market is experiencing a CAGR of 10.4% during (2022-2028). Additionally, The UAE market would display a CAGR of 9.5% during (2022-2028).
Based on Product Type, the market is segmented into Air-cooled and Liquid-cooled. Based on Fuel Type, the market is segmented into Diesel and Gasoline. Based on Vehicle Type, the market is segmented into Passenger Vehicles, Light Commercial Vehicles, Heavy Commercial Vehicles and Others. Based on Design Type, the market is segmented into Fin & Tube and Bar & Plate. Based on Position Type, the market is segmented into Standalone and Integrated. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Dana Incorporated, Valeo SA, Mahle GmbH (Mahle Stiftung GmbH), Hanon Systems (Hahn & Co. Auto Holdings Co., Ltd.), T.RAD Co., Ltd., Modine Manufacturing Company, Banco Products (India) Ltd., AKG Group, Sterling Thermal Technology Limited (Nova Capital Gp Investments Xi Lp), and C, G, & J, Inc.
Scope of the Study
By Product Type
- Air-cooled
- Liquid-cooled
By Fuel Type
- Diesel
- Gasoline
By Vehicle Type
- Passenger Vehicles
- Light Commercial Vehicles
- Heavy Commercial Vehicles
- Others
By Design Type
- Fin & Tube
- Bar & Plate
By Position Type
- Standalone
- Integrated
By Country
- Brazil
- Argentina
- UAE
- Saudi Arabia
- South Africa
- Nigeria
- Rest of LAMEA
Key Market Players
List of Companies Profiled in the Report:
- Dana Incorporated
- Valeo SA
- Mahle GmbH (Mahle Stiftung GmbH)
- Hanon Systems (Hahn & Co. Auto Holdings Co., Ltd.)
- T.RAD Co., Ltd.
- Modine Manufacturing Company
- Banco Products (India) Ltd.
- AKG Group
- Sterling Thermal Technology Limited (Nova Capital Gp Investments Xi Lp)
- C, G, & J, Inc.
Unique Offerings
- Exhaustive coverage
- The highest number of Market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology1.1 Market Definition
1.2 Objectives
1.3 Market Scope
1.4 Segmentation
1.4.1 LAMEA Automotive Charge Air Cooler Market, by Product Type
1.4.2 LAMEA Automotive Charge Air Cooler Market, by Fuel Type
1.4.3 LAMEA Automotive Charge Air Cooler Market, by Vehicle Type
1.4.4 LAMEA Automotive Charge Air Cooler Market, by Design Type
1.4.5 LAMEA Automotive Charge Air Cooler Market, by Position Type
1.4.6 LAMEA Automotive Charge Air Cooler Market, by Country
1.5 Methodology for the research
Chapter 2. Market Overview
2.1 Introduction
2.1.1 Overview
2.1.1.1 Market Composition and Scenario
2.2 Key Factors Impacting the Market
2.2.1 Market Drivers
2.2.2 Market Restraints
Chapter 3. LAMEA Automotive Charge Air Cooler Market by Product Type
3.1 LAMEA Air-cooled Market by Country
3.2 LAMEA Liquid-cooled Market by Country
Chapter 4. LAMEA Automotive Charge Air Cooler Market by Fuel Type
4.1 LAMEA Diesel Market by Country
4.2 LAMEA Gasoline Market by Country
Chapter 5. LAMEA Automotive Charge Air Cooler Market by Vehicle Type
5.1 LAMEA Passenger Vehicles Market by Country
5.2 LAMEA Light Commercial Vehicles Market by Country
5.3 LAMEA Heavy Commercial Vehicles Market by Country
5.4 LAMEA Others Market by Country
Chapter 6. LAMEA Automotive Charge Air Cooler Market by Design Type
6.1 LAMEA Fin & Tube Market by Country
6.2 LAMEA Bar & Plate Market by Country
Chapter 7. LAMEA Automotive Charge Air Cooler Market by Position Type
7.1 LAMEA Standalone Market by Country
7.2 LAMEA Integrated Market by Country
Chapter 8. LAMEA Automotive Charge Air Cooler Market by Country
8.1 Brazil Automotive Charge Air Cooler Market
8.1.1 Brazil Automotive Charge Air Cooler Market by Product Type
8.1.2 Brazil Automotive Charge Air Cooler Market by Fuel Type
8.1.3 Brazil Automotive Charge Air Cooler Market by Vehicle Type
8.1.4 Brazil Automotive Charge Air Cooler Market by Design Type
8.1.5 Brazil Automotive Charge Air Cooler Market by Position Type
8.2 Argentina Automotive Charge Air Cooler Market
8.2.1 Argentina Automotive Charge Air Cooler Market by Product Type
8.2.2 Argentina Automotive Charge Air Cooler Market by Fuel Type
8.2.3 Argentina Automotive Charge Air Cooler Market by Vehicle Type
8.2.4 Argentina Automotive Charge Air Cooler Market by Design Type
8.2.5 Argentina Automotive Charge Air Cooler Market by Position Type
8.3 UAE Automotive Charge Air Cooler Market
8.3.1 UAE Automotive Charge Air Cooler Market by Product Type
8.3.2 UAE Automotive Charge Air Cooler Market by Fuel Type
8.3.3 UAE Automotive Charge Air Cooler Market by Vehicle Type
8.3.4 UAE Automotive Charge Air Cooler Market by Design Type
8.3.5 UAE Automotive Charge Air Cooler Market by Position Type
8.4 Saudi Arabia Automotive Charge Air Cooler Market
8.4.1 Saudi Arabia Automotive Charge Air Cooler Market by Product Type
8.4.2 Saudi Arabia Automotive Charge Air Cooler Market by Fuel Type
8.4.3 Saudi Arabia Automotive Charge Air Cooler Market by Vehicle Type
8.4.4 Saudi Arabia Automotive Charge Air Cooler Market by Design Type
8.4.5 Saudi Arabia Automotive Charge Air Cooler Market by Position Type
8.5 South Africa Automotive Charge Air Cooler Market
8.5.1 South Africa Automotive Charge Air Cooler Market by Product Type
8.5.2 South Africa Automotive Charge Air Cooler Market by Fuel Type
8.5.3 South Africa Automotive Charge Air Cooler Market by Vehicle Type
8.5.4 South Africa Automotive Charge Air Cooler Market by Design Type
8.5.5 South Africa Automotive Charge Air Cooler Market by Position Type
8.6 Nigeria Automotive Charge Air Cooler Market
8.6.1 Nigeria Automotive Charge Air Cooler Market by Product Type
8.6.2 Nigeria Automotive Charge Air Cooler Market by Fuel Type
8.6.3 Nigeria Automotive Charge Air Cooler Market by Vehicle Type
8.6.4 Nigeria Automotive Charge Air Cooler Market by Design Type
8.6.5 Nigeria Automotive Charge Air Cooler Market by Position Type
8.7 Rest of LAMEA Automotive Charge Air Cooler Market
8.7.1 Rest of LAMEA Automotive Charge Air Cooler Market by Product Type
8.7.2 Rest of LAMEA Automotive Charge Air Cooler Market by Fuel Type
8.7.3 Rest of LAMEA Automotive Charge Air Cooler Market by Vehicle Type
8.7.4 Rest of LAMEA Automotive Charge Air Cooler Market by Design Type
8.7.5 Rest of LAMEA Automotive Charge Air Cooler Market by Position Type
Chapter 9. Company Profiles
9.1 Dana Incorporated
9.1.1 Company Overview
9.1.2 Financial Analysis
9.1.3 Segmental and Regional Analysis
9.1.4 Research & Development Expenses
9.2 Valeo SA
9.2.1 Company Overview
9.2.2 Financial Analysis
9.2.3 Segmental and Regional Analysis
9.2.4 Research & Development Expense
9.3 Mahle GmbH (Mahle Stiftung GmbH)
9.3.1 Company Overview
9.3.2 Financial Analysis
9.3.3 Segmental and Regional Analysis
9.3.4 Research & Development Expense
9.4 Hanon Systems (Hahn & Co. Auto Holdings Co., Ltd.)
9.4.1 Company Overview
9.4.2 Financial Analysis
9.4.3 Regional Analysis
9.4.4 Research & Development Expense
9.5 T.RAD Co., Ltd.
9.5.1 Company Overview
9.5.2 Financial Analysis
9.5.3 Regional Analysis
9.5.4 Research & Development Expenses
9.6 Modine Manufacturing Company
9.6.1 Company Overview
9.6.2 Financial Analysis
9.6.3 Segmental and Regional Analysis
9.6.4 Research & Development Expenses
9.7 Banco Products (India) Ltd.
9.7.1 Company Overview
9.7.2 Financial Analysis
9.7.3 Regional Analysis
9.8 AKG Group
9.8.1 Company Overview
9.9 Sterling Thermal Technology Limited (Nova Capital Gp Investments Xi Lp)
9.9.1 Company Overview
9.10. C, G, & J, Inc.
9.10.1 Company Overview
Companies Mentioned
- Dana Incorporated
- Valeo SA
- Mahle GmbH (Mahle Stiftung GmbH)
- Hanon Systems (Hahn & Co. Auto Holdings Co., Ltd.)
- T.RAD Co., Ltd.
- Modine Manufacturing Company
- Banco Products (India) Ltd.
- AKG Group
- Sterling Thermal Technology Limited (Nova Capital Gp Investments Xi Lp)
- C, G, & J, Inc.
Methodology
LOADING...
