Contents:

Preface v Organizers vi Mechanism of Brittle-Ductile Transition of Single Silicon Wafer at Different Temperatures Y.L. Sun, D.W. Zuo, Y.W. Zhu, D.S. Li, M. Qi and M. Wang Mechanism of Material Removal and the Generation of Defects by MD Analysis in Three- Dimensional Simulation in Abrasive Processes J.X. Chen, Y.C. Liang, Q.S. Bai, Y.L. Tang and M.J. Chen Study of the Wettability between Diamond Abrasive and Vitrified Bond with Low Melting Point and High Strength J.B. Zang, J. Lu, Y.H. Wang, X.H. Zhang and Y.G. Yuan Effect of Si and Ti Coating on Interface Bonding between Diamond and Fe-Based Metal Bond J. Lu, Y.H. Wang, J.B. Zang and S.X. Shan Nanodiamond Modified with SHP Y.W. Zhu, F. Xu, J.L. Shen, B.C. Wang and X.Y. Xu Study on Tribological Performance of Fine-Grained Diamond Films B. Shen, W. Zuo, F.H. Sun and M. Chen The Experimental Study on Wear Performance of Brazed Diamond Grits Y. Chen, H.J. Xu and Y.C. Fu Grinding Titanium Alloy with Brazed Monolayer CBN Wheels C.Y. Yang, J.H. Xu, W.F. Ding and S.T. Tong High Performance Grinding Zirconia Ceramics by Brazed Monolayered Diamond Wheels S.S. Li, J.H. Xu, B. Xiao, Y.C. Fu and H.J. Xu Laser Brazing of Diamond Grits with a Ni-Based Brazing Alloy Z.B. Yang, J.H. Xu, Y.C. Fu and H.J. Xu Experimental Study on Porous Metal Bonded Diamond Grinding Wheels (II) - Grinding Performance of Porous Wheels Q.L. Dai, C.B. Luo and C.J. Liao Research on Interfacial Microstructure of Ti-Coated Diamond Brazed and Uncoated Diamond Brazed by High-Frequency Induction B.J. Ma, Y.C. Fu, W.F. Ding, W. Gao and H.J. Xu Study on the Wear Mechanism of Brazed Diamond Grains G.Q. Zhang, H. Huang and X.P. Xu The Characteristic of Organic Bond Grinding Wheel M.W. Chen, J.L. Yuan, Y. Yang and D.Q. Yu A High-Speed Nickel Plating Bath for Manufacture of Diamond Tools B.S. Pan and Y. Yang Mechanical Behaviors of Metal-Bonded Diamond Abrasive Tools with Different Grit Sizes Y.Q. Yu, X.R. Tie and X.P. Xu Vibration Characteristic Analysis of Diamond Saw Blade with Multitude Holes Structure for Vibration and Noise Reduction S.S. Hu, Y.N. Hu, C.Y. Wang and C.X. Chen Finite Element Modeling and Blister Test to Investigate the Adhesive Strength of Diamond Thin Film D.H. Xiang, M. Chen and F.H. Sun Precision form Grinding of Ceramic Materials with Diamond Grinding Wheel Z.M. Cui, D.J. Zhu and L. Du Passivation Model of Diamond Grinding Wheel in Constant-Force Grinding of Si3N4 Ceramic X.L. Tian, Z.Y. Wu, A.Y. She and Z.X. Hu Formation and Control of Burr in Grind-Hardening G.C. Wang, J.D. Liu, Q.F. Li, Y.M. Zhu, H.J. Pei and J.Y. Zhang Experimental Investigation on Effects of Depth of Cut on Micro-Geometric Properties in Quick- Point Grinding S.C. Xiu, C.H. Li and G.Q. Cai High-Efficiency and Precision Grinding Technology of HIPSN All-Ceramic Bearing Race S.H. Li and Y.H. Wu Experimental Researches on Precision Grinding of KDP Crystal Q.G. Wang, H. Gao, Q.Z. Zhang, X.S. Cao and R.K. Kang Comparison of Power in CBN Grinding of Steels and Stone X.P. Xu and C.J. Du Removal Process Technology of Precision Grinding for Complicated Surface Part of High Performance Hard and Brittle Materials T. Ji, D.M. Guo and G.H. Bian Analysis of Influence Factors for the Contact Length between Wheel and Workpiece in Surface Grinding C. Mao, Z.X. Zhou, D.W. Zhou and D.Y. Gu Thermal Study in Diamond Grinding of Zirconia J.Y. Shen, F.Y. You and X.P. Xu A New Technology of Improving Surface Quality of Engine Cylinder X.J. Zhu, H.J. Xu, Y.X. Gao and Z.M. Lu A Study on Grinding Performance of Porous NiTi Shape Memory Alloy Y.Y. Tao, J.H. Xu and W.F. Ding Research on Grind-Hardening Temperature and Cooling Rate of 48MnV Microalloyed Steel B. Xiao, H.H. Su, S.S. Li and H.J. Xu Force Characteristics in Drilling of Engineering Ceramic with a Brazed Diamond Tool H. Huang, C.F. Huang and X.P. Xu Parameters Optimization on the Lapping Process of 9Cr18 with Taguchi Method X.F. Zheng, J.L. Yuan, D.H. Wen and F.Y. Lou Study on the Control and Test of High Precision Honing Machine for Injection Nozzle L. Shi Numerical Simulation Study on Truing and Dressing of Bronze-Bonded Diamond Wheel with Pulsed Laser G.Y. Chen, L.F. Mei, B. Zhang, D.J. Zhu and G.G. Chen Experimental Research on Erosion and Corrosion of WC-Base Matrix Materials for Drill Bits under Impingement of Drilling Muds L.C. Duan, A. Neville and Y. Yan Research and Practice on the On-Line Measurement of Cylindricity Error in a Grinding Machine L. Zhang, Y. Zhao and L. Ba A Calculating Method of the Least Feeding Times in Cylinder Cam’s Grinding Y.T. Zhang, Z.Q. Hu and H.L. Zhang The Experiment Method of the Study on the Airflow Field around the Grinding Wheel in Super-High Speed Based on PIV Y.D. Gong, H. Li, Y.C. Zhang, G.Q. Cai and Z.H. Deng Dynamic Intelligent Prediction Control in Slender Cylindrical Grinding N. Ding, X.M. Li, Y. Ding, G.F. Li and L.S. Wang Interpretative Structural Modeling for Ceramic Grindability System A.B. Yu, N. Zhao, Y.L. Wang and X.L. Tian Study on Self-Configuration Method of Neural Network Model for Grinding Troubles On-Line Monitoring G.J. Liu, Q. Wang, X.L. Shi and R.K. Kang An Optimal Feed Interpolation with Jerk-Limited Acceleration for Five-Axis Grinding J.C. Feng, Y.H. Li, Y.H. Wang and M. Chen Real Time Thermal Error Modeling and Compensation of 5-Axis NC Grinding Machine Tool X.S. Wang, J.G. Yang, H. Wu and J.Y. Yan Study on Squeeze Oil Film Damper in Ultrahigh Speed Grinding T.B. Yu, Y.D. Gong, H.F. Zhao, S. Liang and W.S. Wang Monitoring and Compensation of Thermal Error of Profile Grinding Spindle L.M. Xu, L. Shi, X.M. Zhao and D.J. Hu Experimental Study on the Hardened Surface Layer of Grinding SKD-11 Hardened Steel W.W. Ming, G. Liu and M. Chen Experimental Investigations on Surface Residual Stresses in the As-Sprayed and Ground Nanostructured WC/12Co Coatings Z.H. Deng, Z.W. Hu, Q. Jing and Y.D. Gong Surface and Sub-Surface Integrity of Ultra- Machined BK7 Using Fine and Coarse Grained Diamond Wheels Q.L. Zhao, B. Wang, E. Brinksmeier, O. Riemer, K. Rickens and J. Corbett Experiment Study on Residual Stresses Based on Quick-Point Grinding with Vitrified CBN Wheel Z.R. Pang, S.X. Yuan, W.S. Wang and C.X. Zhu Experimental Investigation into Surface Integrity Finished by Abrasive Jet with Grinding Wheel as Restraint C.H. Li, S.C. Xiu and G.Q. Cai Lapping Process of Diamond Cutting Tool by Molecular Dynamics Simulating Z.Q. Li, T. Sun, Y.D. Yan, J.J. Zhang, Y.C. Liang and S. Dong Study on Contact Mechanism of Interface in Wafer CMP Based on Abrasion Behavior J.X. Su, X.L. Zhang, X.Q. Chen, J.X. Du and D.M. Guo Design of Surface Finish Using Synchronous Process of Grinding and Electrochemical Finishing P.S. Pa Hydrodynamic Analysis of Circular Translational Polishing under Mixed Lubrication W.J. Zhai, C.X. Liu and P.L. Feng Research on Nanoscale Material Removal Process Using Atomic Force Microscopy F.H. Zhang, H.L. Zhang, Y.D. Yan and J.H. Wang Experimental Study of Precision Polishing of Hard and Brittle Material L.H. Dong, C.H. Fan, J. Huang and H.X. Luo Influences of Machining Parameters on Silicon Wafer Polished with Gel-Coupled Ultra-Fine Abrasive Polishing Pads J. Liu and X.P. Xu Study on Mechanical Polishing for CVD Diamond Films of Forming Nucleus Surface and Growing Surface R.F. Chen, D.W. Zuo, W.Z. Lu, D.S. Li, F. Xu, T. Ji and M. Wang Research on the Hydrodynamic Electro-Chemical Mechanical Polishing for Silicon Wafer with Suspension Fluid J.M. Zhan and D. Zheng Study of Finishing Internal Surface Using Magnetic Force Generated by Rotating Magnetic Field in Electromotor X.G. Yao, S.Y. Wang, Y.H. Ding, G. Ya and J. Zhang Experimental Study on Increasing Magnetic Abrasive Finishing Efficiency of Finishing Nonferromagnetic Materials S.R. Zhang, L.F. Yang and G.X. Wu Optimize Parameters of Floating Polishing with Tri-Polishing-Disk X.C. Xu, Z.J. Yuan and B. Lin Study on Pad Conditioning Parameters in Silicon Wafer CMP Process Z.Z. Zhou, J.L. Yuan, B.H. Lv and J.J. Zheng Technique Optimization of Dual Rotation Plates Lapping Method for Ceramic Ball X. Lv, J.L. Yuan and Y. Dai Study on the Surface Integrity of Polished Diamond Thick Film Prepared by EACVD F. Xu, D.W. Zuo, R.F. Chen, W.Z. Lu and M. Wang The Performance and Optimization of Slurry on the Double Sided Polishing Process of Silicon Wafer W. Li, G.X. Hu, X.D. Hu and X.Z. Hu New Thought for Designing the Multi-Phase and Multi-Scale Nanocomposite Ceramic Tool Materials H.L. Liu, C.Z. Huang, X.Y. Teng and H. Wang Crown Modification of Cylinder-Roller Bearing Raceway Using Electrochemical Abrasive Belt Grinding W.J. Xu, B. Tao, G.B. Pang, X.Y. Wang and X.H. Zhao Surface Texturing Technology by Laser Honing Based on Hydrodynamic Lubrication Y.K. Zhang, C.J. Yang, Y.H. Fu, J.Z. Zhou, X.J. Hua and J.H. Ji Research on Micro-Mechanism of Nanocomposite Ceramic in Two-Dimensional Ultrasound Grinding B. Zhao, Y. Wu, G.F. Gao and F. Jiao Experimental Study on the Ultraprecision Lapping Technology of the Copper Substrates for Alloy Films C.R. Zhu, Q. Xu, J.L. Yuan, D.H. Wen and B.H. Lv Influences of Ultrasonic Assistance in High Speed Lapping of Nano ZTA Engineering Ceramic on the Surface Machining Quality F. Jiao, B. Zhao, C.S. Liu and X.S. Zhu Electrochemical Grinding for Unclosed Internal Cylinder Surface P.M. Ming, D. Zhu and Z.Y. Xu Study on the Performances of the Ferromagnetic Poles Based on the Curved Surface Magnetic Abrasive Finishing Y.H. Ding, X.G. Yao, X.X. Wang and S.C. Yang Basic Experimental Research on the NC-Contour Evolution Ultrasonic Assisted Grinding Ceramic Blade Surface J.X. Zheng and J.W. Xu Experimental Research on Small Holes by Electrical Discharge Machining Combined with Ultrasonic Vibration and Assisted Inwall Polish with the Ultrasonic Vibrating M.R. Cao, S.C. Yang, W.H. Li and S.Q. Yang Experimental Study on Lapping Force Characteristics of Hard-Brittle Materials in Ultrasonic Vibration Lapping C.J. Zhang, C.S. Liu, B. Zhao and W.J. Jiang A Mechanistic Model of Material Removal in Magnetorheological Finishing (MRF) F.J. Chen, S.H. Yin, J.W. Yu, H. Ohmori, W.M. Lin and Y. Uehara A Study of Micro Machining with Instantaneous Tiny-Grinding Wheel Based on the Fe3O4 Magnetorheological Fluid J.B. Lu, Q.S. Yan, J. Yu, H. Tian and W.Q. Gao Theoretic Analysis and Experimental Research on Barrel Finishing Uniformity of Crank Shafts with Larger Size W.H. Li, S.Q. Yang and S.C. Yang Surface Waviness Analysis for Axisymmetric Aspheric Lens in Precision Grinding Z.Z. Wang and Y.B. Guo Effect of Nozzle Type and Abrasive on Machinablity in Micro Abrasive Air Jet Machining of Glass J.M. Fan, C.Y. Wang, J. Wang and G.S. Luo Fabrication of WC-6Co-1.5Al (wt%) Hardmetal by High Energy Milling and Electrical Current Sintering X.Q. Li, Y.Y. Li, Y. Long, M. Shao and J.B. Zhang Study on Dynamical Characteristics of Catenary Transformer in Gear Honing S.Y. Wang, M. Lv and G. Ya Ultrasonic Machining Aided Tool Rotation of Sintered NdFeB Magnet L. Li, D. Wang, Z.W. Niu, Z.Y. Li and G.M. Yuan Experimental Investigation of Intermittent Rotary Ultrasonic Machining W.M. Zeng, Z.C. Li, X.P. Xu, Z.J. Pei, J.D. Liu and J. Pi Modeling of Material Removal Rate in Two-Dimensional Ultrasonic Grinding Complex Ceramics G.F. Gao, B. Zhao, Q.H. Kong and C.S. Liu Research on Design and Manufacture of Ultrasonic-Vibration-Based Gear-Honing Device M. Lv, L. Ma, G.X. Liang and Y. Zhang Injection of Thermoplastic Polyurethane to Fix Diamond Beads on Wire Saws H. Guo, X.S. Wu, Y.J. Zhang, Y.X. Chen and X.P. Xu Researching and Manufacturing of Endless Diamond Wire Saws and the Cutting Experiment W. Gao, B.J. Ma, T.K. Cao and Z.C. Liu Study on Removal Mechanism of Fixed-Abrasive Diamond Wire Saw Slicing Monocrystalline Silicon Y.F. Gao, P.Q. Ge and Z.J. Hou The Numerical Analysis on Action Mechanism of Slurry in Free Abrasive Wiresaw Slicing P.Q. Ge, B. Sang and Y.F. Gao Research on Cryogenic Pneumatic Mist Jet Impinging Cooling and Lubricating of Grinding Processes Q.L. An, Y.C. Fu and J.H. Xu Two Domensional Simulation of Velocity Field of Two-Phase Flow for Gas and Solid in the Abrasive Air Jet Nozzle C.Z. Huang, R.G. Hou, Z.W. Liu, Q.L. Li and H.T. Zhu Simulation of the Gas-Liquid-Solid Three-Phase Flow Velocity Field Outside the Abrasive Water Jet(AWJ) Rectangle Nozzle and Ellipse Nozzle R.G. Hou, C.Z. Huang, L. Li, Z.W. Niu and Z.Y. Li The Modeling and Finite Elements Simulation for Pressure Field of Abrasive Jet Precision Finishing With Grinding Wheel as Restraint S.X. Yuan, X.Y. Liu, G.Q. Cai and J.P. Shao Real-Time Measurement and Compensation for Wheel Wear in Curve Grinding Based on Image Processing Method Y.M. Luo and D.J. Hu Fractal Tool-Path Planning for Free-Form Surface Polishing System Y.H. Li, J.C. Feng and Y.H. Wang Apply Image Registration to the Wear Measurement and Analysis of Different PVD-Coating Drills Y.C. Chiou and Y.T. Liang Nonlinearity Analysis and Wavelet Package Transform of Measured Chatter Vibrations in Grinding Process Q.K. Han and B.C. Wen Detection of Grinding Surface’s Quality Based on Image Technique X.L. Liu, C.Y. Wu, Y.Z. Liu, F.G. Yan, Y.F. Li and P. Wang A Fundamental Study on the Digital Recognition of Grinding Wheel J.F. Gong and X.P. Xu Analysis and Simulation of Grinding Wheel Surface Topography B. Lin and X.Y. Huang Evaluation and Measurement of 3D Form Errors of Ground Curve Surface J. Xie, J.L. Guo and J. Xu Study on Remote Control and Fault Diagnosis for Ultrahigh Speed Grinding W.S. Wang, T.B. Yu, X.Y. Jiang and J.Y. Yang 3D Fractal Analysis of Ultra Precision Grinding Influencing on the Surface Topography of Brittle Material M.J. Chen, Q.L. Pang, J.H. Wang and K. Cheng Grinding Process Fuzzy Control on CNC Tool Grinder J. Kang, C.J. Feng, H.Y. Hu and Q. Shao Experiment on Dynamics of the Hybrid Polishing Kinematics Machine Tool with Clearance Based on the Flexible Multi-Body Systems M. Yu and Y.M. Zhang Structural Parameter Optimal Design of a 3-TPS Parallel Grinding Machine Tool Based on Stiffness L. Zhao, Y.D. Gong and G.Q. Cai Study on a Grinding Quality Assessing Method Based on Fuzzy Decision Combined with Analytic Hierarchy Process (AHP) X.L. Shi, G.J. Liu, Q. Wang and R.K. Kang The Experimental Study of Phase Transformation Heat-Transfer in Simulation of Grinding of Ti Alloy J.L. Ren, W. Li, H. Hang and X.Y. Guan On Programming for NC Grinding of Grooved Cam with Discretional Plane Curve Profile Z.Q. Zhang, Y.C. Ge, Z.D. Zheng and S.B. Chen Technology Improvement and Parameter Optimization on the Electroplating Superhard Grinding Material Y.W. Wang, Y.Z. Liu, X.L. Liu, G.B. Wang and H.C. Deng Research on Design Knowledge Expression Method of Abrasive Machine Tool Based on Axiomatic Design Y.X. Feng, B. Zheng, Z. Wei and J.R. Tan Research on Thermal Error Compensation Technology of Grinding Machine Based on Neural Networks Q.J. Guo, J.G. Yang and X.N. Qi Development of the 6-Axles CNC Abrasive Belt Grinding Machine Z. Huang, Y. Huang, M.D. Zhang and X.D. Guo Author Index Keyword Index