The 2009-2014 Outlook for Burial Boxes and Vaults, Casket Shells, Casket Shipping Cases and Containers, and Children's Caskets and Coffins Excluding Concrete and Stone Burial Boxes and Vaults in the United States
ICON Group International, February 2009, Pages: 562
WHAT IS LATENT DEMAND AND THE P.I.E.?
The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if the United States is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).
The latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults in the United States is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a market.
For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends). If inflation rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand.
As mentioned in the introduction, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. In fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults at the aggregate level. Product and service offerings, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand.
THE METHODOLOGY
In order to estimate the latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults across the states and cites of the United States, I used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, I heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a state, city, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium is realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question.
Ignoring, for the moment, exogenous shocks and variations in utility across geographies, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled "A" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data). This type of consumption function is shown as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant.
Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles. In the long-run, however, the propensity to consume is more constant. Similarly, in the long run, households with no income eventually have no consumption (wealth is depleted). While the debate surrounding beliefs about how income and consumption are related is interesting, in this study a very particular school of thought is adopted. In particular, we are considering the latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults across the states and cities of the United States. The smallest cities have few inhabitants. I assume that all of these cities fall along a "long-run" aggregate consumption function. This long-run function applies despite some of these states having wealth; current income dominates the latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults. So, latent demand in the long-run has a zero intercept. However, I allow different propensities to consume (including being on consumption functions with differing slopes, which can account for differences in industrial organization, and end-user preferences).
Given this overriding philosophy, I will now describe the methodology used to create the latent demand estimates for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults in the United States. Since ICON Group has asked me to apply this methodology to a large number of categories, the rather academic discussion below is general and can be applied to a wide variety of categories and geographic locations, not just burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults in the United States.
Step 1. Product Definition and Data Collection
Any study of latent demand requires that some standard be established to define “efficiently served”. Having implemented various alternatives and matched these with market outcomes, I have found that the optimal approach is to assume that certain key indicators are more likely to reflect efficiency than others. These indicators are given greater weight than others in the estimation of latent demand compared to others for which no known data are available. Of the many alternatives, I have found the assumption that the highest aggregate income and highest income-per-capita markets reflect the best standards for “efficiency”. High aggregate income alone is not sufficient (i.e. some cities have high aggregate income, but low income per capita and can not assumed to be efficient). Aggregate income can be operationalized in a number of ways, including gross domestic product (for industrial categories), or total disposable income (for household categories; population times average income per capita, or number of households times average household income).
Latent demand is therefore estimated using data collected for relatively efficient markets from independent data sources (e.g. Official Chinese Agencies, the World Resources Institute, the Organization for Economic Cooperation and Development, various agencies from the United Nations, industry trade associations, the International Monetary Fund, Euromonitor, Mintel, Thomson Financial Services, the U.S. Industrial Outlook, and the World Bank). Depending on original data sources used, the definition of “burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults” is established. In the case of this report, the data were reported at the aggregate level, with no further breakdown or definition. In other words, any potential product or service that might be incorporated within burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults falls under this category. Public sources rarely report data at the disaggregated level in order to protect private information from individual firms that might dominate a specific product-market. These sources will therefore aggregate across components of a category and report only the aggregate to the public. While private data are certainly available, this report only relies on public data at the aggregate level without reliance on the summation of various category components. In other words, this report does not aggregate a number of components to arrive at the “whole”. Rather, it starts with the “whole”, and estimates the whole for all states and cities in the United States (without needing to know the specific parts that went into the whole in the first place).
Given this caveat, this study covers “burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults” as defined by the NAICS coding system (pronounced “nakes”). For a complete definition of burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults, please refer to the Web site at http://www.icongrouponline.com/codes/NAICS.html. The NAICS code for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults is 3399955. It is for this definition of burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults that the aggregate latent demand estimates are derived for the states and cities of the United States. “Burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults” is specifically defined as follows:
3399955
OTHER BURIAL CASKETS AND COFFINS, INCLUDING BURIAL BOXES AND VAULTS (EXCEPT CONCRETE AND STONE), CASKET SHELLS, CASKET SHIPPING CASES AND CONTAINERS, AND CHILDREN’S CASKETS AND COFFINS
33999551
Other burial caskets and coffins, including burial boxes and vaults (except concrete and stone), casket shells, casket shipping cases and containers, and children’s caskets and coffins
3399955100
Other burial caskets and coffins, including burial boxes and vaults (except concrete and stone), casket shells, casket shipping cases and containers, and children’s caskets and coffins
Step 2. Filtering and Smoothing
Based on the aggregate view of burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults as defined above, data were then collected for as many geographic locations as possible for that same definition, at the same level of the value chain. This generates a convenience sample of indicators from which comparable figures are available. If the series in question do not reflect the same accounting period, then adjustments are made. In order to eliminate short-term effects of business cycles, the series are smoothed using an 2 year moving average weighting scheme (longer weighting schemes do not substantially change the results). If data are available for a geographic region, but these reflect short-run aberrations due to exogenous shocks (such as would be the case of beef sales in a state or city stricken with foot and mouth disease), these observations were dropped or "filtered" from the analysis.
Step 3. Filling in Missing Values
In some cases, data are available on a sporadic basis. In other cases, data may be available for only one year. From a Bayesian perspective, these observations should be given greatest weight in estimating missing years. Assuming that other factors are held constant, the missing years are extrapolated using changes and growth in aggregate national, state and city-level income. Based on the overriding philosophy of a long-run consumption function (defined earlier), states and cities which have missing data for any given year, are estimated based on historical dynamics of aggregate income for that geographic entity.
Step 4. Varying Parameter, Non-linear Estimation
Given the data available from the first three steps, the latent demand is estimated using a “varying-parameter cross-sectionally pooled time series model”. Simply stated, the effect of income on latent demand is assumed to be constant unless there is empirical evidence to suggest that this effect varies (i.e., . the slope of the income effect is not necessarily same for all states or cities). This assumption applies along the aggregate consumption function, but also over time (i.e., not all states or cities in the United States are perceived to have the same income growth prospects over time). Another way of looking at this is to say that latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults is more likely to be similar across states or cities that have similar characteristics in terms of economic development.
This approach is useful across geographic regions for which some notion of non-linearity exists in the aggregate cross-region consumption function. For some categories, however, the reader must realize that the numbers will reflect a state’s or city’s contribution to latent demand in the United States and may never be realized in the form of local sales.
Step 5. Fixed-Parameter Linear Estimation
Nonlinearities are assumed in cases where filtered data exist along the aggregate consumption function. Because the United States consists of more than 15,000 cities, there will always be those cities, especially toward the bottom of the consumption function, where non-linear estimation is simply not possible. For these cities, equilibrium latent demand is assumed to be perfectly parametric and not a function of wealth (i.e., a city’s stock of income), but a function of current income (a city’s flow of income). In the long run, if a state has no current income, the latent demand for burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults is assumed to approach zero. The assumption is that wealth stocks fall rapidly to zero if flow income falls to zero (i.e., cities which earn low levels of income will not use their savings, in the long run, to demand burial boxes and vaults, casket shells, casket shipping cases and containers, and childrens caskets and coffins excluding concrete and stone burial boxes and vaults). In a graphical sense, for low income cities, latent demand approaches zero in a parametric linear fashion with a zero-zero intercept. In this stage of the estimation procedure, a low-income city is assumed to have a latent demand proportional to its income, based on the cities closest to it on the aggregate consumption function.
Step 6. Aggregation and Benchmarking
Based on the models described above, latent demand figures are estimated for all major cities in the United States. These are then aggregated to get state totals. This report considers a city as a part of the regional and national market. The purpose is to understand the density of demand within a state and the extent to which a city might be used as a point of distribution within its state. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another. I allocate latent demand across areas of dominant influence based on the relative economic importance of cities within its state. Not all cities (e.g. the smaller towns) are estimated within each state as demand may be allocated to adjacent areas of influence. Since some cities have higher economic wealth than others within the same state, a city’s population is not generally used to allocate latent demand. Rather, the level of economic activity of the city vis-à-vis others is used. Figures are rounded, so minor inconsistencies may exist across tables.
1 INTRODUCTION 9
1.1 Overview 9
1.2 What is Latent Demand and the P.I.E.? 9
1.3 The Methodology 10
1.3.1 Step 1. Product Definition and Data Collection 11
1.3.2 Step 2. Filtering and Smoothing 13
1.3.3 Step 3. Filling in Missing Values 13
1.3.4 Step 4. Varying Parameter, Non-linear Estimation 13
1.3.5 Step 5. Fixed-Parameter Linear Estimation 14
1.3.6 Step 6. Aggregation and Benchmarking 14
2 SUMMARY OF FINDINGS 15
2.1 Latent Demand in The US 15
3 FAR WEST 17
3.1 Executive Summary 17
3.2 Latent Demand by Year - Alaska 19
3.3 Cities Sorted by Rank - Alaska 20
3.4 Cities Sorted by Zipcode - Alaska 21
3.5 Latent Demand by Year - California 22
3.6 Cities Sorted by Rank - California 23
3.7 Cities Sorted by Zipcode - California 40
3.8 Latent Demand by Year - Hawaii 58
3.9 Cities Sorted by Rank - Hawaii 59
3.10 Cities Sorted by Zipcode - Hawaii 61
3.11 Latent Demand by Year - Nevada 63
3.12 Cities Sorted by Rank - Nevada 64
3.13 Cities Sorted by Zipcode - Nevada 65
3.14 Latent Demand by Year - Oregon 67
3.15 Cities Sorted by Rank - Oregon 68
3.16 Cities Sorted by Zipcode - Oregon 71
3.17 Latent Demand by Year - Washington 74
3.18 Cities Sorted by Rank - Washington 75
3.19 Cities Sorted by Zipcode - Washington 81
4 GREAT LAKES 88
4.1 Executive Summary 88
4.2 Latent Demand by Year - Illinois 90
4.3 Cities Sorted by Rank - Illinois 91
4.4 Cities Sorted by Zipcode - Illinois 102
4.5 Latent Demand by Year - Indiana 112
4.6 Cities Sorted by Rank - Indiana 113
4.7 Cities Sorted by Zipcode - Indiana 117
4.8 Latent Demand by Year - Michigan 122
4.9 Cities Sorted by Rank - Michigan 123
4.10 Cities Sorted by Zipcode - Michigan 129
4.11 Latent Demand by Year - Ohio 136
4.12 Cities Sorted by Rank - Ohio 137
4.13 Cities Sorted by Zipcode - Ohio 146
4.14 Latent Demand by Year - Wisconsin 156
4.15 Cities Sorted by Rank - Wisconsin 157
4.16 Cities Sorted by Zipcode - Wisconsin 164
5 MID-ATLANTIC 171
5.1 Executive Summary 171
5.2 Latent Demand by Year - Delaware 173
5.3 Cities Sorted by Rank - Delaware 174
5.4 Cities Sorted by Zipcode - Delaware 175
5.5 Latent Demand by Year - District of Columbia 175
5.6 Cities Sorted by Rank - District of Columbia 177
5.7 Cities Sorted by Zipcode - District of Columbia 177
5.8 Latent Demand by Year - Maryland 178
5.9 Cities Sorted by Rank - Maryland 179
5.10 Cities Sorted by Zipcode - Maryland 185
5.11 Latent Demand by Year - New Jersey 191
5.12 Cities Sorted by Rank - New Jersey 192
5.13 Cities Sorted by Zipcode - New Jersey 201
5.14 Latent Demand by Year - New York 210
5.15 Cities Sorted by Rank - New York 211
5.16 Cities Sorted by Zipcode - New York 230
5.17 Latent Demand by Year - Pennsylvania 250
5.18 Cities Sorted by Rank - Pennsylvania 251
5.19 Cities Sorted by Zipcode - Pennsylvania 261
6 NEW ENGLAND 272
6.1 Executive Summary 272
6.2 Latent Demand by Year - Connecticut 274
6.3 Cities Sorted by Rank - Connecticut 275
6.4 Cities Sorted by Zipcode - Connecticut 280
6.5 Latent Demand by Year - Maine 285
6.6 Cities Sorted by Rank - Maine 286
6.7 Cities Sorted by Zipcode - Maine 289
6.8 Latent Demand by Year - Massachusetts 293
6.9 Cities Sorted by Rank - Massachusetts 294
6.10 Cities Sorted by Zipcode - Massachusetts 302
6.11 Latent Demand by Year - New Hampshire 310
6.12 Cities Sorted by Rank - New Hampshire 311
6.13 Cities Sorted by Zipcode - New Hampshire 314
6.14 Latent Demand by Year - Rhode Island 318
6.15 Cities Sorted by Rank - Rhode Island 319
6.16 Cities Sorted by Zipcode - Rhode Island 320
6.17 Latent Demand by Year - Vermont 322
6.18 Cities Sorted by Rank - Vermont 323
6.19 Cities Sorted by Zipcode - Vermont 325
7 PLAINS 327
7.1 Executive Summary 327
7.2 Latent Demand by Year - Iowa 329
7.3 Cities Sorted by Rank - Iowa 330
7.4 Cities Sorted by Zipcode - Iowa 333
7.5 Latent Demand by Year - Kansas 336
7.6 Cities Sorted by Rank - Kansas 337
7.7 Cities Sorted by Zipcode - Kansas 339
7.8 Latent Demand by Year - Minnesota 342
7.9 Cities Sorted by Rank - Minnesota 343
7.10 Cities Sorted by Zipcode - Minnesota 348
7.11 Latent Demand by Year - Missouri 353
7.12 Cities Sorted by Rank - Missouri 354
7.13 Cities Sorted by Zipcode - Missouri 359
7.14 Latent Demand by Year - Nebraska 364
7.15 Cities Sorted by Rank - Nebraska 365
7.16 Cities Sorted by Zipcode - Nebraska 366
7.17 Latent Demand by Year - North Dakota 368
7.18 Cities Sorted by Rank - North Dakota 369
7.19 Cities Sorted by Zipcode - North Dakota 370
7.20 Latent Demand by Year - South Dakota 371
7.21 Cities Sorted by Rank - South Dakota 372
7.22 Cities Sorted by Zipcode - South Dakota 373
8 ROCKIES 374
8.1 Executive Summary 374
8.2 Latent Demand by Year - Colorado 376
8.3 Cities Sorted by Rank - Colorado 377
8.4 Cities Sorted by Zipcode - Colorado 380
8.5 Latent Demand by Year - Idaho 384
8.6 Cities Sorted by Rank - Idaho 385
8.7 Cities Sorted by Zipcode - Idaho 386
8.8 Latent Demand by Year - Montana 388
8.9 Cities Sorted by Rank - Montana 389
8.10 Cities Sorted by Zipcode - Montana 390
8.11 Latent Demand by Year - Utah 391
8.12 Cities Sorted by Rank - Utah 392
8.13 Cities Sorted by Zipcode - Utah 395
8.14 Latent Demand by Year - Wyoming 398
8.15 Cities Sorted by Rank - Wyoming 399
8.16 Cities Sorted by Zipcode - Wyoming 400
9 SOUTHEAST 401
9.1 Executive Summary 401
9.2 Latent Demand by Year - Alabama 403
9.3 Cities Sorted by Rank - Alabama 404
9.4 Cities Sorted by Zipcode - Alabama 408
9.5 Latent Demand by Year - Arkansas 412
9.6 Cities Sorted by Rank - Arkansas 413
9.7 Cities Sorted by Zipcode - Arkansas 415
9.8 Latent Demand by Year - Florida 418
9.9 Cities Sorted by Rank - Florida 419
9.10 Cities Sorted by Zipcode - Florida 432
9.11 Latent Demand by Year - Georgia 445
9.12 Cities Sorted by Rank - Georgia 446
9.13 Cities Sorted by Zipcode - Georgia 451
9.14 Latent Demand by Year - Kentucky 456
9.15 Cities Sorted by Rank - Kentucky 457
9.16 Cities Sorted by Zipcode - Kentucky 460
9.17 Latent Demand by Year - Louisiana 463
9.18 Cities Sorted by Rank - Louisiana 464
9.19 Cities Sorted by Zipcode - Louisiana 467
9.20 Latent Demand by Year - Mississippi 470
9.21 Cities Sorted by Rank - Mississippi 471
9.22 Cities Sorted by Zipcode - Mississippi 473
9.23 Latent Demand by Year - North Carolina 476
9.24 Cities Sorted by Rank - North Carolina 477
9.25 Cities Sorted by Zipcode - North Carolina 482
9.26 Latent Demand by Year - South Carolina 487
9.27 Cities Sorted by Rank - South Carolina 488
9.28 Cities Sorted by Zipcode - South Carolina 491
9.29 Latent Demand by Year - Tennessee 494
9.30 Cities Sorted by Rank - Tennessee 495
9.31 Cities Sorted by Zipcode - Tennessee 499
9.32 Latent Demand by Year - Virginia 503
9.33 Cities Sorted by Rank - Virginia 504
9.34 Cities Sorted by Zipcode - Virginia 508
9.35 Latent Demand by Year - West Virginia 512
9.36 Cities Sorted by Rank - West Virginia 513
9.37 Cities Sorted by Zipcode - West Virginia 514
10 SOUTHWEST 516
10.1 Executive Summary 516
10.2 Latent Demand by Year - Arizona 518
10.3 Cities Sorted by Rank - Arizona 519
10.4 Cities Sorted by Zipcode - Arizona 522
10.5 Latent Demand by Year - New Mexico 525
10.6 Cities Sorted by Rank - New Mexico 526
10.7 Cities Sorted by Zipcode - New Mexico 528
10.8 Latent Demand by Year - Oklahoma 530
10.9 Cities Sorted by Rank - Oklahoma 531
10.10 Cities Sorted by Zipcode - Oklahoma 533
10.11 Latent Demand by Year - Texas 536
10.12 Cities Sorted by Rank - Texas 537
10.13 Cities Sorted by Zipcode - Texas 549
11 DISCLAIMERS, WARRANTEES, AND USER AGREEMENT PROVISIONS 561
11.1 Disclaimers & Safe Harbor 561
11.2 ICON Group International, Inc. User Agreement Provisions 562
Customers who bought this item also bought
All rights reserved. © Copyright 2013 Research and Markets WWW4
Terms and Conditions Privacy Policy Publishers Employment Opportunities Site Map Link to us Webmaster Affiliate Network
