• 1-800-526-8630U.S. (TOLL FREE)
  • 1-917-300-0470EAST COAST U.S.
  • +353-1-416-8900REST OF WORLD
Smart Materials - Product Image

Smart Materials

  • ID: 679961
  • November 2008
  • 1000 Pages
  • Trans Tech Publications Inc

Selected, peer reviewed papers from the 2nd International Workshop on Functional Materials and Nanomaterials (IWOFM-2)

The main theme of this special volume is that of intelligent and smart materials and their application. One particular aim is to encourage the ‘cross-fertilisation’ of these materials with nanomaterials.

The main topics covered are: devices, processing, applications, modeling and characterization of a wide range of materials including piezoelectric ceramics/polymers, magnetostrictive materials, smart structural materials and composites, electro-optics and other photonic systems, carbon and other nanotubes, new nano and micromaterials, biomedical materials, sensors and divers smart materials.

This wide coverage therefore makes this book an excellent handbook on the subject.

Ed: Tawee Tunkasiri

Note: Product cover images may vary from those shown

Committees

Preface

Piezoelectric Actuators 2008: Key Factors for Commercialization
K. Uchino

Tailored Intelligent Materials
R.P. Tandon

Origin of P-E Hysteresis Offsets in Compositionally Graded Ba(1-x)SrxTiO3 Thick Films
J. Barrel, E. Stytsenko, M. Viviani and K. MacKenzie

Nanosized Titania, a Smart Material or is it just Clever?
R. Stevens, D. Regonini, C.R. Bowen and A. Jaroenworaluck

Magnetic Nanoparticles as Smart Heating Mediator for Hyperthermia and Sorbent Regeneration
N.X. Phuc, N.A. Tuan, N.C. Thuan, V.A. Tuan and L.V. Hong

Defining Structure in Electrospun Polymer Fibres
G.R. Mitchell, M. Belal, F.J. Davis, D.E. Elliott, M. Kariduraganavar, S.D. Mohan, R.H. Olley and S. Sen

I. Piezoelectric Ceramic/Polymers

Sonocatalyzed Ammonothermal Preparation of Fine Lithium Niobate Powders
A. Rujiwatra, N. Thammajak, Y. Chimupala and P. Laoratanakul

Effectively Doping of Rare Earth Additives in Sol Gel Derived PZT Ceramics
S.K. Asl and S.K. Asl

Micro- and Macroscopic Observations of the Microtexture, the Dielectric and Piezoelectric Properties in Bulk and Multilayer Pb (Zr, Ti)O3
N. Binhayeeniyi, A. Dasaesamoh, J. Khakong, P. Khaenamkaew and S. Muensit

Effect of Annealing on the Structure and Dielectric Properties in PZT-PCoN Ceramics
N. Vittayakorn, N. Chaiyo, R. Muanghlua, A. Ruangphanit and W.C. Vittayakorn

Phase Evolution and Physical Properties of (1-x)BZT-xBFN Ceramic System
H. Maimon, S. Eitssayeam, U. Intatha, T. Tunkasiri and G. Satittada

Relationships between Processing Parameters and Properties of PZT Ceramics
C. Puchmark and G. Rujijanagul

Synthesis of Conducting Polymer Films by Plasma Polymerization Process
W. Bhanthumnavin, P. Kamphiranon and B. Paosawatyanyong

Chemical Synthesis and Characterization of ZnTiO3 Powder Prepared by the Coprecipitation Oxalate Method
P. Pookmanee, J. Yotasing and S. Phanichphant

Dielectric and Piezoelectric Properties of B2O3 and SnO2 Doped Barium Titanate Ceramics
N. Tawichai and G. Rujijanagul

Ferroelectricity of (1-x)(Bi0.5Na0.5)TiO3 – xBa(Ti0.95Zr0.05)O3 Solid Solution Ceramics
N. Sawangwan, J. Tontrakoon, S. Sirisoonthorn and T. Tunkasiri

Effect of Calcination Temperature on Phase and Morphology of Sol-Gel Derived PZTN Powders
C. Sangsubun, A. Watcharapasorn and S. Jiansirisomboon

BaMnTiO3 Synthesized by the Oxalate and Impregnation Methods
P. Pookmanee, P. Ketwong and S. Phanichphant

Ammonothermal Preparation of Barium Zirconate Fine Powders
S. Wannapaiboon and A. Rujiwatra

Effect of Al2O3 Addition on Dielectric, Piezoelectric and Ferroelectric Properties of 0.2Pb(Zn1/3Nb2/3)O3–0.8Pb(Zr1/2Ti1/2)O3 Ceramics
A. Ngamjarurojana, S. Ananta and R. Yimnirun

Microstuctural Study and Properties of 0.8PZT-0.2BT Ceramics Using a Two-Stage Sintering Procedure
W.C. Vittayakorn

Effects of Manganese Addition on Phase Formation, Microstructure and Electrical Properties of Barium Titanate Ceramics
J. Tangsritrakul, M. Unruan, P. Ketsuwan and R. Yimnirun

Induced Internal Bubble Shapes Affected Piezoelectric Behaviors of PVDF Films
D. Suwansumpan, H. Manuspiya, P. Laoratanakul and A.S. Bhalla

Dielectric Properties Enhancement in Polybenzoxazine Composite at Multi-Frequency Range
N. Krueson, H. Manuspiya, P. Laoratanakul and H. Ishida

Effect of Thermal Treatment on Dielectric Properties of 0.8Pb(Zr1/2Ti1/2)O3 - 0.2Pb(Co1/3Nb2/3)O3 Ceramics
A. Prasatkhetragarn, S. Ananta, R. Yimnirun and D.P. Cann

Influence of Fabrication Processing on Perovskite Phase Formation of KNN-BZT
M. Sutapun, R. Muanghlua, C.C. Huang, D.P. Cann, W.C. Vittayakorn and N. Vittayakorn

Effect of Lead Nickel Niobate Substitution on Phase Transitions of Lead Zirconate Ceramics Prepared by the Solid State Reaction Method
S. Wirunchit, P. Laoratanakul and N. Vittayakorn

Synthesis, Crystal Structures, Phase Transition Characterization and Thermal Properties of the (1–x)PbZrO3-xPb(Co1/3Nb2/3)O3 Solid Solution System
W. Banlue, R. Muanghlua, W.C. Vittayakorn and N. Vittayakorn

Effects of Zr/Ti Ratio on the Structure and Ferroelectric Properties in PZT-PZN-PMN Ceramics near the Morphotropic Phase Boundary
R. Muanghlua, S. Niemchareon, W.C. Vittayakorn and N. Vittayakorn

Impedance and Dielectric Properties of Nb-Doped Pb(Zr0.52Ti0.48)O3 Ceramics
P. Ketsuwan, A. Ngamjarurojana, Y. Laosiritaworn, S. Ananta, R. Yimnirun and D.P. Cann

Dielectric and Piezoelectric Properties of Zirconium-Doped Bismuth Sodium Titanate Ceramics
A. Watcharapasorn and S. Jiansirisomboon

Structural and Morphologies of (1-x)BaTiO3-xBaFe0.5Nb0.5O3 Solid Solution
S. Eitssayeam

Fabrication of 0-3 Non-Lead Based Piezoceramic/Polymer Composites Using Suction Technique
T. Sareein, W. Thamjaree, W. Nhuapeng and T. Tunkasiri

Microstructures of Zirconium Titanate Powders and Ceramics Prepared by Solid-State Mixed Oxide Method
C. Puchmark and P. Tipparak

Preparation and Properties of B2O3-Doped Ba(Zr0.07Ti0.93)O3 Ceramics
P. Jarupoom, G. Rujijanagul, K. Pengpat and T. Tunkasiri

Characterization of LiNbO3 Powder Prepared by Citrate Gel Method
S. Onnom, D. Wongratanaphisn, P. Supaphol, P. Udomsamuthirun, T. Nilkamjon, S. Radrang, S. Sonkrua and S. Payoogthum

X-Ray Absorption Spectroscopy Study of Ba1-xSrxTiO3 (x = 0.0-0.2) at the Ti-K and Ba-LIII Edges
W. Somphon and S. Srilomsak

Synthesis of Na0.5Bi0.5TiO3 Submicron Particles in Molten Salt
P. Setasuwon and S. Kijamnajsuk

Effects of Starting Materials on Molten Salt Synthesis of Bi4Ti3O12
P. Setasuwon and S. Kijamnajsak

Effect of ZrO2 Doping on Crystal Structure, Microstructure and Phase Transition of Lead Titanate Ceramics
P. Sittiketkron, S. Sukkho and T. Bongkarn

Fabrication of Barium Stannate Tatanate Ceramics via Combustion Technique
C. Wattanawikkam and T. Bongkarn

The Effect of Excess PbO on Crystal Structure and Microstructure of (Pb0.925Ba0.075)TiO3 Ceramics
T. Bongkarn and R. Sumang

The Preparation of Barium Stannate Titanate Ceramics via Solid State Reaction Method
T. Bongkarn and W. Khiawwangthong

Preparation of Barium Strontium Titanate Ceramics via Combustion Method
T. Bongkarn and C. Wicheanrat

Effect of MnO2 Impurity on the PZT-PMN System Ceramics for Piezoelectric Transformer
Y. Suwan, A. Niyompan, R. Tipakontitikul and P. Laoratanakul

Effect of Excess PbO on Crystal Structure, Microstructure and Phase Transition of Lead Titanate Ceramics
W. Tangkawsakul, P. Sittiketkron and T. Bongkarn

Effects of Calcination Temperatures on Phase and Morphology Evolution of (Ba0.25Sr0.75)(Zr0.75Ti0.25)O3 Powders Synthesized via Solid-State Reaction and Combustion Technique
A. Thongtha, K. Angsukased and T. Bongkarn

Phase Formation and Microstructure of PBZT Powders Prepared via Mixed Oxide Method
T. Bongkarn and C. Thiangchit

Effect of Calcination Temperatures on Microstructure and Phase Formation of Ba(Zr0.25Ti0.75)O3 Powders
T. Bongkarn, N. Phungjitt and N. Vittayakorn

Fabrication of Lead Barium Titanate Ceramics via Conventional Solid-State Mixed Oxide Technique
T. Bongkarn and P. Panya

Fabrication of Barium Zirconium Titanate Ceramics Using Ultrasonic Ball Milling Technique
W. Thamjaree, W. Nhuapeng and T. Tunkasiri

Ferroelectric and Mechanical Properties of PZT-PZN-PNN Ceramics
S. Nabunmee, N. Vittayakorn, D.P. Cann and G. Rujijanagul

Antiferroelectric Lead Zirconate Ceramics with Nanoparticle Alumina Additions
C. Puchmark, S.J. Milne and G. Rujijanagul

Morphotropic Phase Boundary of Lead-Free Piezoelectric Ceramics from BNT- KN System
N. Pisitpipathsin, W. Koontasing, S. Eitssayeam, U. Intatha, G. Rujijanagul, K. Pengpat and T. Tunkasiri

Formation of NaNbO3 Crystals in Dielectric Glass and Glass-Ceramics of a Na2O-Nb2O5-Al2O3-SiO2 System
S. Thongsaeng, A. Niyompan, R. Tipakontitikul and K. Pengpat

Ferroelectric and Dielectric Aging Effects of Fe3+/Nb5+ Hybrid-Doped Barium Titanate Ceramics
S. Prasertpalichatr, M. Unruan, J. Tungsritrakul and R. Yimnirun

II. Magnetostrictive Materials

Effect of Calcination Conditions on Phase Formation and Characterization of BiFeO3 Powders Synthesized by a Solid-State Reaction
C. Silawongsawat, S. Chandarak, T. Sareein, A. Ngamjarurojana, S. Maensiri, P. Laoratanakul, S. Ananta and R. Yimnirun

Effect of Calcination Conditions on Phase Formation and Characterization of BiFeO3-BaTiO3 Powders Synthesized by a Solid-State Reaction
S. Chandarak, T. Sareein, A. Ngamjarurojana, S. Maensiri, P. Laoratanakul, S. Ananta and R. Yimnirun

III. Shape Memory Alloys
Assessment of Mechanical Properties and Transformation Behavior of Locally-Made Ni-Ti Alloys Used in Orthodontics
N. Chiranavanit, A. Khantachawana, N. Anuwongnukroh and S. Dechkunakorn

Effect of Direct Electric Resistance Heat Treatment on Mechanical Properties of NiTi Orthodontic Arch Wires
W. Kiattiwongse, A. Khantachawana and P. Santiwong

IV. Actuator and Sensor Materials

Materials of Nanocrystalline Sr1-xBaxBi4Ti4O15 for Piezoelectric Sensor
N.A.A. Manaf, M.M. Salleh and M. Yahaya

Electrical Conductivity of Poly(3,4-Ethylenedioxythiophene)-Poly(Styrenesulfonate) Coatings on Polyacrylonitrile Nanofibers for Sensor Applications
M. Panapoy, M. Saengsil and B. Ksapabutr

SiO2-Multiwalled Carbon Nanotube Base Gas Sensor
S. Jesen, S. Ruangphet and S. Cheirsirikul

Application of the PEGDE Modified Silk Fibroin Membrane to an Amperometric Glucose Biosensor
P. Moonsri, S. Watanesk, R. Watanesk, H. Niamsup, Q. Cheng and R.L. Deming

Enhanced the Performance of Fluorescence Gas Sensor of Porphyrin Dye by Using TiO2 Nanoparticles
N.H. Yusoff, M.M. Salleh and M. Yahaya

Determination of Mn Site in BaTiO3 by X-Ray Absorption Spectroscopy
R. Yimnirun, J. Tangsritrakul, S. Rujirawat and S. Limpijumnong

Changes in Ferroelectric Properties of 0.7PMN–0.3PT Ceramic with Compressive Stress
M. Unruan, R. Wongmaneerung, Y. Laosiritaworn, S. Ananta and R. Yimnirun

Scaling Behavior of Dynamic Hysteresis in Hard PZT Bulk Ceramics under Influence of Compressive Stress
N. Wongdamnern, A. Ngamjarurojana, S. Ananta, Y. Laosiritaworn and R. Yimnirun

Gas-Sensing Property Evaluation of Reactively Sputtered Chromium Oxide Thin Films
C. Oros, A. Wisitsoraat, P. Limsuwan, M. Horpathum, V. Patthanasettakul and A. Tuantranont

Effect of Platinum Impregnation on ZnO Tetrapods for Ethanol Sensor
N. Hongsith and S. Choopun

Ethanol Sensing Characteristics of ZnO Nanostructures Impregnated by Gold Colloid
E. Wongrat, P. Pimpang, N. Mangkorntong and S. Choopun

Structural and Optical Study of Nano-Structured CdS-CBD Thin Films on CdTe Substrates Grown by Various Temperatures Deposited
C. Suwattanaphiboon, N. Suttisiri, E. Hoonnivathana and C. Kunsombat

Spectroscopys Studies of Iron Phthalocyanine Thin Films
O. Chamlek, S. Pratontep, T. Kerdcharoen and T. Osotchan

Feature Difference of Interaction between Various Organic Solvent Vapors and Metal Phthalocyanines Coated on Quartz Crystal
T. Hongkachern, W. Suwannet, R. Jaisutti, S. Pratontep and T. Osotchan

V. Smart Structural Materials and Composites

Stability of Liquid Al Foams by Oxidised Al Powders
S. Asavavisithchai

Transparent Glass Ceramics from 65LiNbO3-35SiO2 Glass Composition
P. Prapitpongwanich, R. Harizanova, C. Rüssel and K. Pengpat

Surfactant-Templated Synthesis of Modified Porous Clay Heterostructure (PCH)
K. Srithammaraj, R. Magaraphan and H. Manuspiya

Evaluation the Manufacturing Process of Silk/Gelatin Electrospun Membrane
C.Y. Chao, C.W. Lou, C.T. Lu, C.C. Huang and J.H. Lin

Influence of ZnO Content on Film Morphology and Device Performance of MEH-PPV/ZnO Hybrid Solar Cells
K. Kasemsuwan, T. Suvewong, V. Pavarajarn and C. Thanachayanont

Water Absorption and Phase Transition of Calcium Carbonate in the Sea Water Mussel (Anadara Granosa)
W. Siriprom, W. Onreabroy and P. Limsuwan

Temperature Effect on Chicken Egg Shell Investigated by XRD, TGA and FTIR
K. Naemchan, S. Meejoo, W. Onreabroy and P. Limsuwan

Structural and Optical Properties of Zn0.8Co0.2O Ceramics
S. Sujinnapram, W. Onreabroy and T. Nantawisarakul

The Effect of Organic Modificaition Method onto Montmorillonite on Mechanical Properties of Natural Rubber
C. Thongpin, N. Tangchantra, P. Kaewpetch, J. Dejkun and A. Chartsiriwattana

Thermal Stabilization of PVC Using Organic Modified Montmorillonite
C. Thongpin, N. Tangchantra, A. Kositchaiyong, R. Sagnuanmoo, J. Jantham and A. Sooksa-ard

Thermal Conductivity of Ceramic Fibres at High-Temperatures
M. Anis-ur-Rehman

Effect of WC Addition on Phase Formation and Microstructure of TiC-Ni Composites
N. Wora-uaychai, N. Poolthong and R. Tongsri

Effect of Reaction between Fe and Carbide Particles on Mechanical Properties of Fe-Base Composite
S. Chakthin, N. Poolthong and R. Tongsri

Copper Powder Extrusion: A Smart Processing for Energy and Environment Conservation
R. Wichianrak, N. Thavarungkul, N. Poolthong and R. Tongsri

Toughening of PZT Ceramics by In Situ Complex Structures
N. Thongmee, A. Watcharapasorn and S. Jiansirisomboon

Fabrication and Characterization of Sol-Gel Derived PZT/WO3 Ceramics
T. Sreesattabud, A. Watcharapasorn and S. Jiansirisomboon

Influence of Annealing Temperature on the Properties of Nanostructure ITO Thin Films Prepared by Ion-Assisted Electron Beam Evaporation
A. Pokaipisit, M. Horprathum and P. Limsuwan

Effect of Carbon Addition on Dielectric Properties of 0-3 PZT-Portland Cement Composite
N. Jaitanong, K. Wongjinda, P. Tammakun, G. Rujijanagul and A. Chaipanich

Effect of Polarization on the Microstructure and Piezoelectric Properties of PZT-Cement Composites
A. Chaipanich and N. Jaitanong

Magnetic Hysteresis Properties in Dilute Ising Ultra-Thin-Film: Monte Carlo Investigation
Y. Laosiritaworn

Mechanical Properties and Microstructure of Aramid/Al2O3/Epoxy Resin Laminated Composites
S. Kumfu, W. Nhuapeng, W. Thamjaree and T. Tunkasiri

Manufacturing Process and Property Analysis of Sound Absorption Sandwich Board
C.W. Lou, P. Chen and J.H. Lin

Novel Manufacturing Process for Tencel/Chitosan/Pectin Composite Dressing
C.K. Lin, C.W. Lou, C.T. Lu, C.C. Huang and J.H. Lin

Thermoplastic Polyurethane (TPU) Honeycomb Air Cushion Combined with Polylactic Acid (PLA) Nonwoven Fabric for Impact Protection
C.H. Lee, C.W. Lou, W.H. Hsing, I.J. Tsai and J.H. Lin

The Effects of Thermal Consolidation Methods on PET Nonwoven Composites for Thermal Insulation Use
C.W. Lou, C.W. Lin, C.C. Lin, S.J. Li, I.J. Tsai and J.H. Lin

Manufacturing Processing of Polylactic Acid Braids as Artificial Bone Matrix
C.W. Lou, C.T. Lu, C.C. Huang, H.Y. Wang and J.H. Lin

Manufacturing Process and Property Evaluation of Functional Composite Yarn-Dyed Woven Fabrics Made from Bamboo Charcoal/Stainless Steel and TPU
C.I. Huang, C.I. Su, C.W. Lou, W.H. Hsing and J.H. Lin

Manufacturing and Stab-Resisting Properties of Compound Fabric Reinforced Using Recycled Nonwoven Selvages
J.M. Chen, J.C. Hsieh, C.W. Lou, W.H. Hsing, H.J. Yang and J.H. Lin

Manufacturing Process and Practical Examination for a 3D Structural Geocell Made from Recycled PET Fibers
W.H. Hsing, J.C. Hsieh, C.W. Lin, C.W. Lou, P.T. Liu and J.H. Lin

Manufacture and Performance Evaluation of Elastic/Bamboo Wrapped Yarn
S.P. Chang, C.M. Lin, C.W. Lou, W.H. Hsing and J.H. Lin

Evaluation of Manufacturing Technology and Characterization of Composite Fabric for Stab Resistant Materials
C.C. Lin, C.W. Lou, W.H. Hsing, W.H. Ma, C.M. Lin and J.H. Lin

PET/PP Blend with Bamboo Charcoal to Produce Functional Composites: Evaluation of Functionalities
J.H. Lin, C.W. Lou, J.M. Chen, C.T. Hsieh and Z.H. Liu

The Effect of Processing Parameters on Properties of Bi2GeO5 Glass Ceramics
P. Kantha, S. Sirisoonthorn and K. Pengpat

Photo-Induced Superhydrophilic TiO2 Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature
M. Horprathum, P. Chindaudom, V. Patthanasettakul, S. Rotbuathong, P. Eiamchai and P. Limsuwan

Temperature Dependence of Optical Constants of Silver Film Studied by In Situ Spectroscopic Ellipsometry
S. Rojebuathong, P. Chindaudom, W. Luangtip, M. Horphatum, P. Eiamchai, V. Patthanasetthakul and P. Limsuwan

Investigation of Aluminium Diffusion into an Amorphous Silicon Thin Film at High Temperature by In Situ Spectroscopic Ellipsometry
W. Luangtip, S. Rotbuathong, P. Chindaudom, M. Horphatum, V. Patthanasetthakul, P. Eiamchai and T. Srikirin

Self-Cleaning Properties of TiO2 Films Deposited by Reactive Magnetron Sputtering Using Smooth D.C. and Pulsed D.C. Source
S. Pudwat, P. Rakkwamsuk and S. Damrongrattana

Fabrication of Double Layers of Aramid Fiber/Alumina/Epoxy Resin Laminate Composite Using Low-Pressure Technique
W. Nhuapeng, S. Kumfu, W. Thamjaree and T. Tunkasiri

Fabrication of Ferroelectric Bismuth Titanate Glass-Ceramic by Incorporation Method
K. Pengpat

The Influence of Total and Oxygen Partial Pressures on Structure and Hydrophilic Property of TiO2 Thin Films Deposited by Reactive DC Magnetron Sputtering
S. Chaiyakun, A. Buranawong, T. Deelert and N. Witit-anun

Characterization of Anatase and Rutile TiO2 Thin Films Deposited by Two Cathodes Sputtering System
N. Witit-anun, P. Rakkwamsuk and P. Limsuwan

Ferroelectric Glass-Ceramics from the PbO-Bi2O3-GeO2 System
A. Munpakdee, K. Pengpat, T. Tunkasiri and D. Holland

Composites Base on Geopolymer Matrices: Preliminary Fabrication, Mechanical Properties and Future Applications
T.D. Hung, D. Pernica, D. Kroisová, O. Bortnovsky, P. Louda and V. Rylichova

VI. Electro-Optics

High Capacity Packet Switching with a Soliton Pulse in a Nonlinear Micro Ring Resonator
S. Mitatha, K. Dejhan, S. Thongmee and P.P. Yupapin

Attosecond Pulse and Beyond Generation Based on Multi-Stage Micro Ring Resonators
S. Mitatha, K. Dejhan, S. Chaiyasoonthorn and P.P. Yupapin

Entangled Photon Generation in a Nonlinear Micro Ring Resonator for Quantum Key Distribution Use
C. Sripakdee, K. Sarpat, W. Suwancharoen and P.P. Yupapin

Temperature Dependent Photoluminescence of ZnSe/Alq3 Hybrid Heterostructure
W. Pecharapa, P. Potirak and W. Yindeesuk

Light Scattering in Poly(Methyl Methacrylate) Hybrid Sheet Filled by Titanium Dioxide Nanocrystals Prepared by High Electric Field Assisted Spray
Pyrolysis Process
B. Ksapabutr, P. Anukoolwittaya and M. Panapoy

Improvement of UV Protection Properties in Poly(Methyl Methacrylate) Sheet Coated by Titanium Dioxide/ Poly(Methyl Methacrylate) Hybrid Film
M. Panapoy, P. Wannasut and B. Ksapabutr

Packet Switching Start-Stop Bits Generation Based on Bifurcation Behavior of Light in a Micro Ring Resonator
N. Pornsuwancharoen, J. Kumbun and P.P. Yupapin

Construction and Evaluation of the Fiber-Optic Sensor System for Chemical Vapor Detection
M. Kittidechachan, I. Sripichai, W. Supakum, S. Thuamthai, S. Angkaew and P. Limsuwan

Fluoride and Antimony-Doped Tin Oxide Film by Spray Pyrolysis
R. Buntem, P. Kraisingdecha and W. Sadee

VII. MEMS

Improving Sensitivity of p-n Junction Temperature Sensor by Carrier Lifetime Modification
A. Poyai, E. Ratanaudomphisut, J. Supadech, N. Klunngien, C. Hruanan and S. Sophitpan

Novel Design of a Micro Gyroscope Based Birefringence Measurement for Sensor Applications
P. Phiphithirankarn, P. Yabosadee, W. Suwancharoen and P.P. Yupapin

VIII. Carbon and Others

Finite Element Modeling of van der Waals Interaction for Elastic Stability of Multi-Walled Carbon Nanotubes
C. Thongyothee and S. Chucheepsakul

Improvement of Mesopore Structure of Resorcinol and Formaldehyde Carbon Cryogels by Acid Solution
K. Kraiwattanawong, P. Kitchaiya, A. Neramittagapong, P. Praserthdam and H. Tamon

Optimization of Chemical Vapor Deposition Synthesis Conditions for Multiwall Carbon Nanotube by Statistical Analysis of Experiment
P. Saiprasert, D. Koolpiruck and S. Chiangga

Mechanochemical Treated Multi-Walled Carbon Nanotubes for Incorporation of Metal Ions
U. Rinzin, P. Singjai, P. Wilairat and S. Meejoo

Synthesis of Coil-Like Shape CNTs by Thermal CVD Method
U. Pakdee, N. Suttisiri, E. Hoonnivathana and S. Chiangga

Attachment of Metal Oxide Nanoparticles on Carbon Nanotubes with Different Oxidation Levels
C.T. Hsieh and J.Y. Lin

Microstructure and Characterizations of Portland-Carbon Nanotubes Pastes
T. Nochaiya, P. Tolkidtikul, P. Singjai and A. Chaipanich

Mechanical Properties of Hemp Fiber Composites with Carbon Nanotubes Reinforcement
H. Longkullabutra, W. Nhuapeng, W. Thamjaree and T. Tunkasiri

The Diamond Crystal Nucleation by Combustion Activation CVD
Y. Wongprasert, R. Muanghlua and K. Sato

Growth Conditions for Carbon Nanotubes and Helical Nanofibers on Copper Substrates Using Sparked Catalysts
B. Toboonsung and P. Singjai

Electronic Structure of Straight and T-Shape Singled-Wall Carbon Nanotube Junctions: A Molecular Quantum Mechanics Study
A. Udomvech and T. Kerdcharoen

IX. New Nano

Structural Evolution in the Processing of Fe/ BaFe12O19 Nano Composite via Mechanical Alloying
A. Ataie and R. Nikkhah-Moshaie

Oxygen Control on Nanocrystal-AlON Films by Reactive Gas-Timing Technique R.F. Magnetron Sputtering and Annealing Effect
W. Bunjongpru, S. Porntheeraphat, N. Somwang, P. Khomdet, C. Hruanun, A. Poyai and J. Nukeaw

Photocatalytic Decolorization of Red Dye in Aqueous ZnO-TiO2 Suspensions
S.K. Asl, K. Sadrnezhaad and M. Kianpoor rad

Electrode Properties of Nanostructured and Amorphous Mg1.75Nb0.25Ni Compound Produced by Mechanical Alloying
S.F. Kashani Bozorg, M. Mohri and A. Ebrahimi-Purkani

Direct Synthesis of Anisotropic Metal Particles by Ink Jet Printing Technique
R. Kitsomboonloha, T. Bera and J. Dutta

Chitosan Clad Manganese Doped Zing Sulphide Nanocrystallites for Biolabeling
S. Baruah, G. Tumcharern and J. Dutta

The Effects of Substrate Temperature on Optical Properties and Surface Morphology of Nickel Phthalocyanine Thin Films Grown by Organic Evaporator System
P. Inchidjuy, S. Pukird and J. Nukeaw

Electrical Characterization of Diamond-Like Carbon Films Synthesized by Plasma Enhanced CVD Technique
B. Paosawatyanyong, K. Honglertsakul, N. Rujisamphan and W. Bhanthumnavin

Effects of Gold Nanoparticles on the Fabrication of Red Colored High Refractive Index Lead Glass
P. Dararutana, J. Dutchaneephet, P. Chetanachan, P. Wathanakul and N. Sirikulrat

Fabrication of Zirconia Nanofibers Using Zirconatrane Synthesized by Oxide One-Pot Process as Precursor
M. Panapoy and B. Ksapabutr

Mechanical Property Evaluation of ZnO Thin Films Using Nanoindentation and Scanning Probe Microscope
T.H. Fang and S.H. Kang

Influences of Zr4+ and Polyacrylamide on Structural and Optical Properties of ZnO Nanoparticles Prepared via Microwave Irradiation
P. Pisitsak and R. Magaraphan

Functionalized Porous Clay Heterostructure for Heavy Metal Adsorption from Wastewater
R. Tassanapayak, R. Magaraphan and H. Manuspiya

Niobium and Antimony-Modified Titanium Dioxide/Epoxy Thin Film for Proton Exchange Membrane Fuel Cell
T. Kuanchaitrakul, S. Chirachanchai and H. Manuspiya

Improvement of Hydrophobic Properties of the Electrospun PVA Fabrics by SF6 Plasma Treatment
A. Thongphud, B. Paosawatyanyong, P. Visal-athaphand and P. Supaphol

Microstructure and Characterizations of Portland-Bottom Ash-Silica Fume Cement Pastes
W. Wongkeo, W. Thawornson and A. Chaipanich

Investigation of Nanomaterials Prepared by Thermal Evaporation of Carbon-ZnO Mixtures
D. Polsongkram, P. Kasian, P. Limsuwan, U. Tipparach, S. Samran, L. Chow and S. Pukird

Synthesis and Characterization of Nanostructured Materials Prepared from SiO2 and GeO2 Mixture by Carbon Assisted Method
P. Chamninok, P. Kasian, P. Limsuwan, U. Tipparach, S. Samran, L. Chow and S. Pukird

Zn2TiO4 Nanostructures Prepared by Thermal Oxidation Method
T. Santhaveesuk, D. Wongratanaphisan, N. Mangkorntong and S. Choopun

CuO Nanostructure by Oxidization of Copper Thin Films
P. Raksa, A. Gardchareon, N. Mangkorntong and S. Choopun

Synthesis of SiO2 Nanopowder from Rice Husk Ash
A. Ruksudjarit and G. Rujijanagul

Preparation of Nano-Crystalline Boehmite as a Gamma-Alumina Source for the Production of Na.beta-Al2O3 Solid Electrolyte
P. Pimsorn, R. Tipakonthitikul, A. Niyompan, N. Kanchanarat and T. Tunkasiri

Synthesis and Characterization of Zinc Oxide Nanocrystals by Solid-State and Solvothermal Techniques
C. Satienpattanakoon, D. Yiamsawas, W. Kangwansupamonkon and R. Nuisin

Fabrication of Gold Nanocubes by the Electrochemical Method
C.J. Huang, P.H. Chiu, Y.H. Wang and K.L. Chen

Synthesis of Gold Nanodogbones by the Seed Mediated Growth Method with Addition of Vitamin C Solvent
P.H. Chiu, C.J. Huang, Y.H. Wang and C.H. Chen

X. Molecular Actuator and Sensor Materials

Chiral Helices in a 3D Network of Zn2(en)V2O7 (en = Ethylenediamine)
S. Krachodnok, K.J. Haller and I.D. Williams

Time-of-Flight Measurement of Poly(3-Hexylthiophene) Thin Films
M. Sittishoktram, U. Asawapirom and T. Osotchan

Optical Properties of Metal Free and Metal Phthalocyanine by Molecular Band Calculation
S. Pengmanayol and T. Osotchan

XI. Biomedical/Bioresponsive

Design and Preparation of a Bioresponsive Hydrogel for Biomedical Application as a Wound Dressing
C. Witthayaprapakorn, R. Molloy, K. Nalampang and B.J. Tighe

Modification of Thai Silk Fibroin Scaffolds by Gelatin Conjugation for Tissue Engineering
J. Chamchongkaset, S. Kanokpanont, D.L. Kaplan and S. Damrongsakkul

Substitution of Iron in Preparation of Enhanced Thermal Property and Bioactivity of Hydroxyapatite
S. Meejoo, W. Pon-On, S. Charnchai and T. Amornsakchai

Processing, Mechanical Property Development and In Vitro Hydrolytic Degradation Studies of a Poly(L-Lactide-co-e-Caprolactone) Monofilament Fibre for Potential Use as an Absorbable Surgical Suture
P. Chooprayoon, J. Siripitayananon, R. Molloy, S. Bunkird, T. Soywongsa and A. Tariyawong

Differential Expression of Osteogenic Differentiation in Human Umbilical Cord Wharton’s Jelly-Derived Mesenchymal Stem Cells Treated with Demineralized Bone
D. Dhitiseith and S. Honsawek

Development of a Protein-Filled Conduit for Peripheral Nerve Regeneration
K. Yingsukwattana, S. Agthong, R. Mongkonnavin, Y. Tabata and S. Kanokpanont

Electrical Properties and Microstructures of P2O5-CaO-Na2O Glasses
N. Raengthon, K. Pengpat and T. Tunkasiri

Ultrastructural Characterization of Liposomes Using Transmission Electron Microscope
P. Chetanachan, P. Akarachalanon, D. Worawirunwong, P. Dararutana, A. Bangtrakulnonth, M. Bunjop and S. Kongmuang

Cholesteryl Cetyl Carbonate as a Smart Material for Drug Delivery Application
N. Aeinlang, T. Srichana and S. Songkro

Preparation and Drug Release Studies of Chitosan/Methoxy Poly(Ethylene Glycol)-b-Poly(D,LLactide-co-Glycolide) Nanocomposite Films for Use as Controlled Release Drug Delivery
N. Niamsa, M. Srisa-ard, Y. Srisuwan, N. Kotsaeng, Y. Baimark, N. Narkkong and W. Simchuer

Study on Morphology and Thermal Stability of Nanoporous Silk Fibroin Films
Y. Srisuwan, N. Kotsaeng, Y. Baimark, N. Narkkong and W. Simchuer

Preparation and Characterization of Poly(D,L-Lactide) and Silk Fibroin Nanocomposite Microparticles for Potential Use in Tissue Engineering
N. Kotsaeng, Y. Srisuwan, Y. Baimark, N. Narkkong and W. Simchuer

Zwitterionic and Charge-Balanced Polyampholyte Copolymer Hydrogels
D. Campbell and B.J. Tighe

XII. Speciality Polymer with Controlled Microstructures

Morphology of Electrospun Mats of Soy Protein Isolate and its Blend
M. Phiriyawirut, N. Rodchanacheewa, N. Nensiri and P. Supaphol

Novel Three-Component Blends Based on Poly(L-Lactide)
S. Juikham, A.J. Amass and B.J. Tighe

Chemical Resistant Improvement of Natural Rubber and Nitrile Gloves by Coating with Hydrophobic Film
N. Atthi, O. Nimittrakoolchai, W. Jeamsaksiri and S. Supothina

Effect of Nano-Porous Alumina Filler on Thermal and Electrical Transport Properties of Solid Polymer Electrolyte (PEO)12LiBF4
H.M.J.C. Pitawala, M.A.K.L. Dissanayake, V.A. Seneviratne, B.E. Mellander and I. Albinsson

Characterization and Thermal Properties of Sol-Gel Processed PMMA/SiO2 Hybrid Materials
A. Buasri, K. Liangraksa, T. Sirisom and N. Tangkachalakul

Surface Treatment of Polystyrene Films with Inductively Coupled Plasma System
R. Nakhowong, T. Srikhirin and T. Osotchan

Ring-Opening Polymerization of e-Caprolactone Using Novel Tin(II) Alkoxide Initiators
A. Kleawkla, R. Molloy, W. Naksata and W. Punyodom

XIII. Others Smart Materials

Investigation of the Strain Hardening and Bauschinger Effect of Low and High Strength Steel Application in Drawbead-Tester by Experiment and Numerical Simulation
K. Sirivedin, K. Krueger, V. Thoms, D. Suesse, R. Mueller and M. Schatz

Extraction of Defect in Doping Silicon Wafer by Analyzing the Lifetime Profile Method
W. Pengchan, T. Phetchakul and A. Poyai

Preparation and Properties Indium Tin-Oxide Thin Films by RF Sputtered for Photodetectors
I. Srithanachai, K. Nutaman, A. Rerkratn, S. Niemcharoen and S. Supadech

High Resolution X-Ray Diffraction and Raman Scattering Studies of Cubic-Phase InN Films Grown by MBE
S. Kuntharin, S. Sanorpim, H. Yaguchi, Y. Iwahashi, M. Orihara, Y. Hijakata and S. Yoshida

Effect of Palladium on Photocatalytic Activity of SnO2 Nanoparticles
R. Janmanee, P. Pirakitikulr, N. Wetchakun, C. Liewhiran and S. Phanichphant

Computational Study on Thermodynamic and Structural Properties of ZSM-5 Doped by Al/Fe and Al/P
S.B. Pongsai and S. Hannongbua

Synthesis and Characterization of PLA-Based Aliphatic-Aromatic Copolyesters: Effect of Diols
M. Namkajorn, A. Petchsuk, M. Opaprakasit and P. Opaprakasit

Synthesis and Characterization of Degradable Poly(Ethylene Terephthalate-co-Lactic Acid) and its Blends
P. Sriromreun, M. Opaprakasit, A. Petchsuk and P. Opaprakasit

Sintering Behavior of the ß"-Alumina Solid Electrolyte for Battery Applications
A. Niyompan, K. Srisurat, R. Tipakonthitikul, K. Pengpat and T. Tunkasiri

Improved Electrical Conducting Wires for SOFCs
M. Masomtob, K. Wongtida, J. Charoensuk and S. Charojrochkul

Defect-Induced Properties of Doped Alpha Alumina Samples
P. Jantaratana, P. Dararutana, W. Wongkokua, S. Pongkrapan and P. Wathanakul

Preparation of IR Reflective Green Pigment
T. Thongkanluang, P. Limsuwan and P. Rakkwamsuk

Thermoelectric Properties of BixSbyTezSew Nanocomposite Materials
V. Kosalathip, T. Kumpeerapun, S. Migot, B. Lenoir and A. Dauscher

Simple Thermoelectric Module
T. Kumpeerapun, H. Scherrer, V. Kosalathip and I. Sripichai

Behaviour of Various Glass Seal for Planar Solid Oxide Fuel Cell
N. Punbusayakul, W. Wongklang, K. Wongtida, J. Charoensuk and S. Charojrochkul

InGaPN/GaP Lattice-Matched Single Quantum Wells on GaP (001) Grown by MOVPE
D. Kaewket, S. Sanorpim, S. Tungasmita, R. Katayama and K. Onabe

Effect of Substrate-Surface Orientation on the N Incorporation in GaAsN Films on GaAs Grown by MOVPE
P. Klangtakai, S. Sanorpim, S. Kuboya, R. Katayama and K. Onabe

Synthesis and Thermoelectric Properties of CoSb3-yTey
S.C. Ur and I.H. Kim

Sulphate-Based Flame-Retardant for Handmade Mulberry Paper
W. Naksata and M. Naksata

Lead-Free Ferroelectric Material: Dysprosium Doped Bi4Ti3O12
N. Thongmee, A. Watcharapasorn and S. Jiansirisomboon

Sinterbility of (Bi4-xLax)Ti3O12 Ceramics
P. Siriprapa, A. Watcharapasorn and S. Jiansirisomboon

Hydrothermal Synthesis of Zinc Oxide (ZnO) Microparticle
P. Pookmanee, S. Khuanphet and S. Phanichphant

ESR and Optical Absorption Spectra of Copper (II) Ions in Glasses
J. Kaewkhao, S. Rhianphumikarakit and N. Udomkan

Enhancement of the Photocatalytic Performance of Ru-Doped TiO2 Nanoparticles
K. Wetchakun, N. Wetchakun and S. Phanichphant

Magnetic Properties of Mn Doped NiO
E. Swatsitang and A. Pimsawat

Biosurfactant Production from Palm Oil Using Sequencing Batch Reactors: Effect of Cycle Time
O. Huayyai, S. Chavadej, R. Rujiravanit and M. Abe

Cost Effective Natural Adsorbent for Fluoride Removal
S. Janta, S. Watanesk, R. Watanesk and S. Thiansem

Effect of Bi2O3 Content on the Properties of Bi2O3-BaO-B2O3 Glass System
J. Kaewkhao, A. Pokaipisit and W. Chewpraditkul

Synthesis, Phase Formation and Characterization of Co4Nb2O9 Powders Synthesized by Solid-State Reaction
N. Chaiyo, R. Muanghlua, A. Ruangphanit, W.C. Vittayakorn and N. Vittayakorn

A Study of the Effects of Processing Conditions on Mechanical Properties of Polypropylene/Multiwall Carbon Nanotube Nanocomposites Using Design of Experiments
N. Duangphattra and C. Aramphongphun

Influence of Substrate Temperature on Some Properties of Close-Spacing Thermally Evaporated CdTe Thin Films
T. Gaewdang, N. Wongcharoen, P. Siribuddhaiwon and N. Promros

Effects of Potassium Fluoride Salt Additive on the Sintering Temperature and Dielectric Properties of BaFe0.5Nb0.5O3 Ceramics
U. Intatha, K. Sathitada, S. Eitssayeam, K. Pengpat, G. Rujijanagul, P. Thavornyuttakarn and T. Tunkasiri

Effect of ZrO2 Doping in Physical Properties of Barium Iron Niobate Ceramics
U. Intatha, S. Eitssayeam, K. Pengpat, G. Rujijanagul and T. Tunkasiri

Production and Characterization of Polyhydroxyalkanoates (PHAs) from Inexpensive Substrates by Alcaligenes Latus
C. Thammawong, K. Thongkhong, K. Iamtassana, A. Sharp and P. Opaprakasit

Controlled-Release Material for Urea Fertilizer from Polylactic Acid
J. Papangkorn, C. Isaraphan, S. Phinhongthong, M. Opaprakasit and P. Opaprakasit

Application of Artificial Neural Network to Calculate Curie Temperature of Ferromagnetic Materials
W.S. Laosiritaworn

Controlled-Release Materials for Fertilizer Based on Lactic Acid Polymers
N. Jintakanon, P. Opaprakasit, A. Petchsuk and M. Opaprakasit

Fragrant Finishing of Cotton Fabric Using ß-Cyclodextrin
M. Nakpathom, B. Somboon and S. Changpradit

Use of Hydroxypropylmethylcellulose as Thermo-Responsive Flocculant in Skim Natural Rubber Latex
N. Moonprasith, S. Loykulnant and C. Kongkaew

Microstructure and Interfaces of Thin Film Capacitors on Base Metal Foils
T. Dechakupt, G. Yang, I.M. Reaney, C.A. Randall and S. Trolier-McKinstry

Influence of Structural and Electrical Properties of ITO Films on Electrochromic Properties of WO3 Films
K. Aiempanakit, S. Dumrongrattana and P. Rakkwamsuk

Effect of DC Power on Structural and Hydrophilic Activity of TiO2 Films
C. Salawan, A. Muakngam, B. Sukbot, K. Aiempanakit and S. Dumrongrattana

Oily Soil Detergency under Microemulsion Conditions: Effects of Oil Loading and Surfactant Adsorption
R. Kaewpukpa, S. Chavadej and J.F. Scamehorn

Ferroelectric Properties of Sn-Doped PZT–PNN Ceramics
K. Sutjarittangtham, U. Intatha, S. Eitssayeam and G. Rujijanagul

Author Index

Keyword Index

Note: Product cover images may vary from those shown
Note: Product cover images may vary from those shown

RELATED PRODUCTS

Our Clients

Our clients' logos