Handbook of Polymer Coatings for Electronics

  • ID: 1762645
  • Book
  • 408 Pages
  • Elsevier Science and Technology
1 of 4
This completely revised edition remains the only comprehensive treatise on polymer coatings for electronics. Since the original edition, the applications of coatings for the environmental protection of electronic systems have greatly increased, largely driven by the competitive need to reduce costs, weight and volume. The demands for high-speed circuits for the rapid processing of signals and data, high-density circuits for the storage and retrieval of megabits of memory, and the improved reliability required of electronics for guiding and controlling weapons and space vehicles have triggered the development of many new and improved coating polymers and formulations. Both the theoretical aspects of coatings (molecular structure of polymer types and their correlation with electrical and physical properties) and applied aspects (functions, deposition processes, applications, testing) are covered in the book. Over 100 proprietary coating formulations were reviewed, their properties collated, and tables of comparative properties prepared. This book is useful as both a primer and as a handbook for collecting properties data.
Note: Product cover images may vary from those shown
2 of 4
Chemistry and Properties of Coatings
Polyurethanes-Epoxies-Phenoxies-Silicones
Chemistry and Properties of Coatings
Polyimides-Fluorocarbons-Polyxylylenes
Chemistry and Properties of Coatings
Polyesters-Polyvinyls-Polystyrenes-Acrylics-Diallylphthalates-Polyamides-Phenolics-Polysulfides
Functions of Coatings
Manufacturing Technology
Circuit Coatings
Coatings for Space Electronics
Wire and Coil Coatings
Coating for Electronic Components and Devices
Specifications
Appendix
Table A-1: Abbreviations and Symbols Used in Text
Table A-2: Thickness Units and Equivalents Commonly Used for Coatings
Table A-3: Thermal-Conductivity Units and Equivalents
Table A-4: Thermal-Conductivity Data
Table A-5: Coefficients of Linear Thermal Expansion
Table A-6: Water-Absorption Data
Table A-7: Moisture-Vapor-Transmission Rates of Plastic Coatings and Films
Table A-8: Sward Hardness Values for Coatings
Table A-9: Abrasion-Resistance Values for Organic Coatings
Table A-10: Dielectric Strength
Table A-11: Arc Resistance
Table A-12: Volume Resistivities
Table A-13: Dielectric Constants of Polymer Coatings (at 25
C)
Table A-14: Dielectric Constants of Materials Other Than Polymers
Table A-15: Dielectric Constants of Inorganic Insulators
Table A-16: Dissipation Factors (at 25
C)
Index
Note: Product cover images may vary from those shown
3 of 4

Loading
LOADING...

4 of 4
Licari, James J.
has his own consulting firm, AvanTeco, specializing in materials and processes for electronics. He holds a BS in Chemistry from Fordham University and a PhD in Chemistry from Princeton University, where he was a DuPont Senior Fellow. His areas of expertise include materials and processes for electronic applications, primarily for high reliability systems, hybrid microcircuits, printed wiring circuits, and other interconnect packaging technologies. He is an expert on polymeric materials including adhesives, coatings, encapsulants, insulation, reliability based on failure modes and mechanisms. Dr. Licari has had a forty-year career dedicated to the study and advancement of microelectronic materials and processes.

Notable achievements throughout this career include conducting the first studies on the reliability and use of die-attach adhesives for microcircuits, which he did in the mid-1970s through the early 1980s, making industry and the government aware of the degrading effects of trace amounts of ionic contaminants in epoxy resins. He conducted early exploratory development on the use of non-noble metal (Cu) thick-film conductor pastes for thick-film ceramic circuits. He carried out the first studies on the use of Parylene as a dielectric and passivation coating for MOS devices and as a particle immobilizer for hybrid microcircuits. He developed the first photo-definable thick-film conductor and resistor pastes that were the forerunners of DuPont's Fodel process, for which he received a patent was granted in England. And he developed the first photocurable epoxy coating using cationic photoinitiation by employing a diazonium salt as the catalytic agent (U.S. 3205157) . The work was referenced as pioneering work in a review article by J.V. Crivello "The Discovery ad Development of Onium Salt Cationic Photoinitiators,” J. Polymer Chemistry (1999)
Hughes, Laura A.

Note: Product cover images may vary from those shown
5 of 4
Note: Product cover images may vary from those shown
Adroll
adroll