Characterization and Control of Interfaces for High Quality Advanced Materials II. Ceramic Transactions, Volume 198. Ceramic Transactions Series

  • ID: 2174827
  • Book
  • 490 Pages
  • John Wiley and Sons Ltd
1 of 4
This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer–reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.
Note: Product cover images may vary from those shown
2 of 4

Preface xiii

JOINING TECHNOLOGY FOR NEW METALLIC GLASSES AND INORGANIC MATERIALS

The Structure of the Welded Zone and Phase Transformation Behavior of Ni–Based Bulk–Glass Forming Alloy 3D.V. Louzguine–Luzgin, G. Xie, T. Tsumura, K. Nakata, Y. Murakami, H.M. Kimura, and A. Inoue

Brazing of Advanced Ceramic Composites: Issues and Challenges 9Mrityunjay Singh and Rajiv Asthana

Development of a Variable Temperature UHV–Laser Microscope Combined With a Pulsed Laser Deposition for In Situ Studies of Ceramics/Metallic Glass Interfaces 15Yuji Matsumoto, Takuma Obata, Miki Hiraoka, and Masao Katayama

Stress Analysis of Geometrically Complex and Ultra Large Scale Model by Fractal Multi–Grid Method 21H. Murakawa, H. Serizawa, M. Tejima, K. Taguchi, and S. Itoh

Influence of Grain–Grain Interfaces on Heat Transfer in Dense and Porous Oxide Ceramics 27D.S. Smith, C. Poulier, B. Na′ft–Ali, A. Michot, and J. Absi

Fabrication of Colloidal Photonic Crystals from Submicron–Sized Spheres 33Daisuke Nagao, Mitsuaki Hirose, Ryoji Kameyama, Hideki Matsumoto, Yoshio Kobayashi, and Mikio Konno

Spark Plasma Sintering of Al203 Particulate Dispersed Zr55Cu30AI10NÍ5 Metallic Glassy Matrix Composite 39Guoqiang Xie, Dmitri V. Louzguine–Luzgin, Akira Okubo, Hisamichi Kimura, and Akihisa Inoue

Porous Bulk Metallic Glass Produced by Spark Plasma Sintering of Gas Atomized Zr55Cu30AI10Ni5 Glassy Powders 45Guoqiang Xie, Wei Zhang, Qingsheng Zhang, Dmitri V. Louzguine–Luzgin, Akira Okubo, Hisamichi Kimura, and Akihisa Inoue

Mechanical Properties of Friction–Stir Welded Titanium Joint 51Hidetoshi Fujii, Hideaki Kato, Kazuhiro Nakata, and Kiyoshi Nogi

Silica–Coating of Barium Titanate Particles 57Hideki Matsumoto, Daisuke Nagao, Yoshio Kobayashi, and Mikio Konno

Dissolution of Hydrogen into Tungsten Phosphate Glasses through Palladium Coating 63Hiromasa Tawarayama, Hiroshi Kawazoe, Shouichi Sugata, Futoshi Utsuno,Hiroyuki Inoue, and Hideo HosonoProperties of Metallic Glass Coatings on an Aluminum Alloy Substrate Produced Using a HVOF Spraying Process 69Hyun–Guen Kim, Kazuhiro Nakata, Takuya Tsumura, Masaharu Sugiyama, Takanori Igarashi, Masahiro Fukumoto, Hisamichi Kimura, and Akihisa Inoue

Photoelectron Spectroscopic Study of Energy Level Alignment at C12A7:e∼ / Alq3 Interfaces 79Ki–Beom Kim, Maiko Kikuchi, Masashi Miyakawa, Hiroshi Yanagi, Toshio Kamiya, Masahiro Hirano, and Hideo Hosono

Development of Nanoceramics: Application to Diffusion Bonding 85Michiyuki Yoshida, Yutaka Shinoda, Takashi Akatsu, and Fumihiro Wakai

Influence of Friction Stir Welding Parameters on Microstructure and Mechanical Properties of AA2024–T3 Aluminum Alloy 91Saad Ahmed Khodir, Toshiya Shibayanagi, and Masaaki Naka

Effects of Processing Temperature on Bonding Behavior of Hydroxyapatite Ceramics and Titanium by Hydrothermal Hot–Pressing Method 97Takamasa Onoki, Tomoaki Watanabe, Eiichi Yasuda, Masahiro Yoshimura,Toshiyuki Hashida, and Yasuhiro Tanabe

Orientation Distribution in Friction Stir Processed A6061 Aluminum Alloy 103Toshiya Shibayanagi and Takamasa Matsumoto

Weldability and Mechanical Property of Ni53Nb2oTi10Zr8Co6Cu3 Metallic Glass Foil by Laser Welding 109Takuya Tsumura, Katsunori Kobayashi, Kazuhiro Nakata, Natsuki Yoneyama,Taichi Murakami, Hisamichi Kimura, and Akihisa Inoue

Glass Transition Phenomena and Heat Capacity of Zr0.55"′o.1oNlo.05(–′Uo.3o 117Yosuke Moriya, Takahiro Yoshida, Hitoshi Kawaji, Tooru Atake, Mikio Fukuhara, Hisamichi Kimura, and Akihisa Inoue

Development of Fiber Laser Aided Spot Heating System and its Application to Control of Microstructure in Pure Aluminum 123Toshiya Shibayanagi, Masahiro Tsukamoto, Nobuyuki Abe, Nobuyuki Matsuda, Yukihiro Soga, and Takamasa Matsumoto

Preparation of an MTES Hybrid Bioactive Coating on Metal Surfaces Using the Sol–Gel Method 129Yasuto Hoshikawa, Eiichi Yasuda, Takamasa Onoki, Masaru Akao, and Yasuhiro Tanabe

Synthesis of Si02–Coated Magnetite Nanoparticles and Immobilization of Proteins on Them 135Yoshio Kobayashi, Mayumi Yoshida, Daisuke Nagao, Yasuo Ando,Terunobu Miyazaki, and Mikio Konno

NANOPARTICLES AND POWDERS

Fabrication of Textured Alumina–Mullite–Silicon Carbide Nano–Composites 145Yoshio Sakka, Sho Saito, Atsushi Honda, and Tohru S. Suzuki

Colloidal Consolidation of Mixed Powders of the Alumina/Indium Tin Oxide System 153Naoki Matsunaga, Shinji Ueno, Yosuke Tanaka, and Yoshihiro Hirata

Improvement of Silica Particle Dispersability in Xylene Using Surface Modification 159Chika Takai, Masayoshi Fuji, and Minoru Takahashi

Self–Dispersible Silica Nanoparticles Modified with Aminoalkylsilane 165Toshio Kakui, Mitsuru Ishii, Sayaka Sato, Masao Ishiguro, and Koji Hisanaga

Low Temperature Co–Fired Ceramics (LTCC) Design and Characterization of Interfaces 173Torsten Rabe, Markus Eberstein, and Wolfgang A. Schiller

Controlling Interfacial Chemistry During the Processing of Micron Scale Surgical Instruments 179Nicholas Antolino, Gregory Hayes, James H. Adair, Christopher Mühlstein, Mary Frecker, and Eric Mockensturm

Development of Nanoencapsulated Curcumin in Chitosan for Cosmetic Use via Evaporation of O/W/O Emulsion 185W. Tanthapanichakoon, N. Sowasod, and T. Charinpanitkul

Structural and Morphological Study of Nanoceramics Prepared by Spray Pyrolysis 193L.S. Gómez, M.E. Rabanal, J.M. Torralba, L. Mancic, and O. MilosevicInfluence of Water Content of Starting Powder Mixture on the Mechanochemical Synthesis of Strontium
Doped Lanthanum Manganite 199Jintawat Chaichanawong, Kazuyoshi Sato, Hiroya Abe, Makio Naito, Tawatchai Charinpanitkul, and Wiwut Tanthapanichakoon

Carbon Nanotubes as Photocatalytic Carriers 205Georgios Pyrgiotakis and Wolfgang Sigmund

Anisotropie Sintering Shrinkage and Grain Growth for Spherical Alumina Powder Compacts Aligned in High Magnetic Field 211Anze Shut, Lingke Zeng, Yanchun Liu, Atsushi Makiya, and Keizo Uematsu

Effect of Mo Powder Surface Condition on Fabrication of Mo–Si02 Functionally Graded Materials with Slipcasting Method 219Ayumu Umemoto, Koichi Hayashi, Kyoko Hayano, Noritaka Saito, Kenji Kaneko, and Kunihiko NakashimaA Mechanically Synthesized La08Sr02Mn03 Fine Powder for the Cathode Material of an Intermediate Temperature Solid Oxide Fuel Cell (IT–SOFC) 225Kazuyoshi Sato, Akira Kondo, Hiroya Abe, Makio Naito, and Jintawat Chaichanawong

Hydrothemal Synthesis of Nanostructured Bi2Te3 Powder 231H. Kaga, Y. Kinemuchi, and K. Watari

Influence of Nanoporous Structure on Silane Coupling Surface Modification Behavior and Adhesion Properties of Spherical Silica Particles 237Toshiyuki Kani, Maki Tamonoki, Takahiro Suzuki, Mayumi Tsukada, and Hidehiro Kamiya

Effect of Magnetic Field on Orientation of Diamagnetic Ceramic Particles Dispersed in Slurry 243Satoshi Tanaka, Atsushi Makiya, Keizo Uematsu, and Yutaka Doshida

Micro–Patterning of Tin Oxide by Micro–Molding in Capillaries 251Junko Imasu, Hiroshi Fudouzi, and Yoshio Sakka

Gelcasting Formulation of Alumina Slurry Offering Some Advantages in Ceramic Shaping 257Ruben L. Menchavez, Masayoshi Fuji, Hiroaki Takegami, Tomohiro Yamakawa, and Minoru Takahashi

Effect of Surfactants on the Formation of Hollow CaC03 Particle by Bubble Template Method 263Yong Sheng Han, Li Wei Lin, Masayoshi Fuji, Takeshi Endo, Hideo Watanabe, and Minoru TakahashiA Facile Method to Synthesize ZnO Tubes by Involving Ammonia Bubbles 269Liwei Lin, Yongsheng Han, Masayoshi Fuji, Takeshi Endo, Hideo Watanabe, and Minoru Takahashi

Rapid Drying Technique for Slip Cast Body 275Takashi Shirai, Masaki Yasuoka, Yoshiaki Kinemuchi, Yuji Hotta, and Koji Watari

INTERFACE CHARACTERIZATION AND CONTROL

Improvement of Molten–Metal Wettability on Ceramics by Micro–Macro Level Morphology Control 283Hideki Kita, Hideki Hyuga, Katsumi Yoshida, and Naoki Kondo

Ceramic Surface Roughness Modification Using a Polymethylsilsesquioxane and Silicon Oxycarbide Film Coating 289Manabu Fukushima, Seiji Nakano, and Hideki Kita

An AFM Study of the Interaction Between an a–Alumina Particle and a Flat Sapphire Surface in High Ionic Strength Electrolyte Solutions 295Huseyin Yilmaz, Kimiyasu Sato, and Koji Watari

ENERGY AND ENVIRONMENT

Cohesive Dust Cake Formation on a Ceramic Tube Filter as the Main Cause of a Pressure Drop Increase in a High Temperature Gas Cleaning Process 303Nobuhiro Misawa, Hiroshi Sasatsu, Shinichi Sakuno, and Hidehiro Kamiya

Simulation of the Filtration Process for a Flat Fabric Filter 309Yuping Yao, Ning Mao, Masashi Wada, Hidehiro Kamiya, and Chikao Kanaoka

Evaluation of the Long Term Stability of LSM/ScSZ Composite Powder Materials for SOFC Cathodes 317
Akifusa Hagiwara, Natsuro Hobara, Hiroyuki Shimada, Koichi Takizawa, Kazuyoshi Sato, Hiroya Abe, and Makio Naito

A Novel Concept and Approach to Fabricate Protective KB/PVdF Composite Films on Metallic Bipolar Plates for PEM Fuel Cells 325Jingtian Yin, Takehisa Fukui, Kenji Murata, T. Hirabayashi, S. Yamamuro, M. Matsuda, and M. Miyake

Study of an Alum–Ceramic Heat Storage Material 333Xuetan Ren, Anze Shui, Lingke Zeng, Yanchun Liu, and Junsheng Wu

Development of Filtration Technology for PM2.5 in Diesel Exhaust 339Masahiro Yoshikawa, Tomihiko Uemura, Daiki Kan, Takehisa Fukui, Tawatchai Charinpanitkul, Makio Naito, and Wiwut Tanthapanichakoon

SMART PROCESSING TECHNOLOGY

Nanoscale Particle Processing Through Aerosol Routes 347Olivera B. Milosevic, Lidija T. Mancic, Maria Eugenia Rabanal, Luz Gomez, and Jose Manuel Torralba

A Treatment of Carbonaceous Waste Containing Metals by Steam Plasma 353Hiroshi Nisikawa, Sumihiro Higuchi, Manabu Tanaka, and Tadashi Takemoto

Effect of Ultrasonication on Dispersion and Aggregate Size of Ti02 Nanoparticles in Concentrated Aqueous SuspensionKimitoshi Sato, Ji–Guang Li, Takamasa Ishigaki, and Hidehiro Kamiya

Investigation of Bonding Mechanism Between Plasma Sprayed Al203 Top Coating and Ti–AI Undercoating on Steel Substrate 369Shinichiro Adachi and Kazuhiro Nakata

Mechanochemical Synthesis of Barium Titanate From Nanocrystalline BaC03 and Ti02 375Akira Kondo, Kazuyoshi Sato, Hiroya Abe, Makio Naito, and Hirofumi Shimoda

The Effect of Direct Diode Laser Beam Size in Heat Conduction Lap Welding of a Thin Film on a Thick Substrate 381Nobuyuki Abe, Naoyuki Nakamura, Yoshinori Fuñada, and Masahiro Tsukamoto

Mictostructural Characterization and Mechanical Properties of Plasma Sprayed Hydroxyapatite Coatings 389M. F. Morks and Akira Kobayashi

Measurements of Cathode Surface Temperature of Plasma Torch 395Shinichi Tashiro, Hiroshi Nishikawa, and Manabu Tanaka

Topology Analysis of the Cu3Sn Phase in Electronic Interconnections 401Feng Gao, Hiroshi Nishikawa, and Tadashi Takemoto

Freeform Fabrication of Photonic Crystals with 3–Dimensional Diamond Structure by Micro–Stereolithography 407Weiwu Chen, Soshu Kirihara, and Yoshinari Miyamoto

Properties of Inductivety–Coupled RF Plasmas Sustained with Internal Antenna for Deposition of Carbon–Related Films 413Kosuke Takenaka, Yuichi Setsuhara, Kazuaki Nishisaka, and Akinori Ebe

MATERIALS DESIGN

Characteristics of ITO Films Deposited by dc Magnetron Sputtering Using Various Sintered Indium–Tin–Oxide Targets 421Joon Hong Park, Sang Chul Lee, Jin Ho Lee, and Pung Keun Song

Sintering and Enhanced Mechanical Properties of Densified Multiwalled Carbon Nanotube/TiN Composites 427Lian Gao and Linqin Jiang

Characterization of the Surface Morphology of Organic and Inorganic Hybrid Thin Films A First Step to Fabricate an Artificial Cell Membrane 433Wakako Manabe, Hiroshi Takano, and Masayuki ItohIon Permeability and Membrane Potential of Organic and Inorganic Hybrid Thin Films–Characterization of Artificial Cell Membrane 439Ryuji Okamura, Masayuki Itoh, and Hiroshi Takano

Corrosion Resistance of TiAIN/CrN, TiAIN, and CrN Coatings Prepared By RF Magnetron Sputtering 445Dong Hwan Song, Woo Yang Jang, and Jong Kook Lee

Plasma Thermal Deposition of Aluminum on Mg–Li Work–Hardened Alloy 453Masato Tsujikawa, Shin–ichiro Adachi, Kazuhiro Nakata, Masaichiro Kamita, and Sachio Oki

Behavior of Superficial Oxide at Diffusion–Bonded Interface of TiN and its Influence on Bond Strength 461Shinji Koyama, Makoto Takahashi, and Kenji Ikeuchi

The Effects of Functional Groups of Surface Modifier on Internal Friction and Young′s Modulus of Ceramic Composites 467T. Shimazu, N. Isu, M. Miura, and E.H. Ishida

Author Index 473

Note: Product cover images may vary from those shown
3 of 4

Loading
LOADING...

4 of 4
Kevin G. Ewsuk is a Principal Member of the Technical Staff in the Ceramic Processing and Inorganic Materials Department at Sandia National Laboratories, where he is responsible for ceramic processing and process modeling R&D, advanced composite processing and characterization, and characterizing and modeling powder compaction and sintering. Dr. Ewsuk received his PhD and MS degrees in Ceramic Science from the Pennsylvania State University and his research interests are in powder processing, process characterization, and sintering science and technology.
Note: Product cover images may vary from those shown
5 of 4
Note: Product cover images may vary from those shown
Adroll
adroll