+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)


Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V. Proceedings of the symposium held at the 103rd Annual Meeting of The American Ceramic Society, April 22–25, 2001, in Indiana, Ceramic Transactions, Volume 129

  • ID: 2178991
  • Book
  • Region: United States, Indiana
  • 220 Pages
  • John Wiley and Sons Ltd
1 of 3
The most recent advancements in the areas of ceramic/composite processing and characterization are presented in this new volume. Selected topics include sol–gel processing, microwave sintering, reaction forming/bonding, polymer precursors, rapid prototyping, mechanical alloying, diamond and diamond–like structures, and functionally graded materials.
Note: Product cover images may vary from those shown
2 of 3

Preface ix

CYD/CYI and Plasma Technology

Cubic and Tetragonal Hafnium Oxide Films Prepared by lon–Beam–Assisted Deposition 3R. R. Manory I. Shimizu,! Mori, S. Miyake, H. Saito, G. Kimmel, and T.Tanaka

Plasma–Sprayed Ceramic Coatings on Glass and Glass Ceramic Substrates 15R. Gadow, A. Killingen and C. Li

Gas Infiltration and Preceramic Polymer Processing Manufacturing of Biomorphic SiC Ceramics by Gas Phase Infiltration of Wood 33E.Vogli, C. Zollfrank, H. Sieben R Greil, and J. Mukerji

Manufacturing of Anisotropie Ceramics from Preceramic Polymer Infiltrated Wood 43C. Zollfrank, R. Kladny, H. Sieben R Greil, and G. Motz

Rheological Behavior

Modeling the Dynamic Rheological Behavior of AGAR–Based Aqueous Binders 53K. C. Labropoulos, D. E. Niesz, and S. C. Danforth

Mechanical Alloying

Effects of Alloying with Nb, Re, and AI on Yield Strength of MoS¡2 69A. A. Sharif, A. Misra, J. J. Petrovic, and T. E. Mitchell

Reaction Forming

In situ Synthesis of Nonoxide–Boron Nitride (NOBN) Composites 83G. J. Zhang, J. F.Yang,! Ohji, and S. Kanzaki

Fabrication of Lightweight Oxide/lntermetallic Composites at I000°C by the Displacive Compensation of Porosity (DCP) Method 93RJ.Wurm, R Kumar; K. D. Ralston, M.J. Mills, and K. H. Sandhage

Microstructure and Mechanical Properties of SiAION Ceramics with Porous Structure 103J.Yang,Y Beppu, G.J. Zhang, and T Ohji

Functionally Graded Materials & Coatings

Functionally Graded Porosity in Ceramics Analysis with High Resolution Computed Tomography 113J. Goebbels, G. Weidemann, R. Dittrich, M. Mangier; and G.Tomandl

Novel Processing for Combined Coatings with Dry Lubrication Ability 125R. Gadow and D. Scherer

Ceramic Coatings on Fiber Woven Fabrics for Lightweight Ballistic Protection 137K.V Niessen and R. Gadow

Laminated Object Manufacturing

The Effect of Sheetstock on the Layered Manufacturing of a Telescoping Ceramic Actuator 153A. A. Bender and R. J. Rayne

Electronic and Magnetic Materials

Binder Removal by Supercritical Extraction from BaTi03–Pt Multilayer Ceramic Capacitors 165S.J. Lombardo, R.V Shende, and D
5. Krueger

Processing and Characterization of PZT and PLZT Thick Films 175O. Huang, A. Bandyopadhyay, and S. Bose

Micromachining of PZT–Based MEMS 187T B. Myers, S. Bose, A. Bandyopadhyay, and J. D. Fraser

Templated Grain Growth of Lead Metaniobate Ceramics by Solid Freeform Fabrication 199K. Nonaka, M. Allahverdi, and A. Safari

Investigation of Ni–Cu–Zn Ferrite with High Performance Derived from Nanoferrite Powders 211X. Wang, W Qu, L Li, Z. Gui, and J. Zhou

Index 219

Note: Product cover images may vary from those shown
3 of 3


4 of 3
J. P. Singh
Narottam P. Bansal
Amit Bandyopadhyay
Note: Product cover images may vary from those shown