+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)


Materials Processing Fundamentals

  • ID: 2496201
  • Book
  • 336 Pages
  • John Wiley and Sons Ltd
1 of 3
Materials Processing Fundamentals provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Along with the fundamentals, it covers modeling of diverse phenomena in processes involving iron, steel, non–ferrous metals, and composites. It also goes on to examine second phase particles in metals, novel sensors for hostile–environment materials processes, online sampling and analysis techniques, and models for real–time process control and quality monitoring systems.
Note: Product cover images may vary from those shown
2 of 3

Preface  xi

About the Editors xiii

Process Metallurgy of Steel

Evolution of Inclusions in Ti–Bearing Ultra–Low Carbon Steel during RH Refining Process 3W. Yang, S. Li, Y. Li, X. Wang , L. Zhang, X. Liu, and Q. Shan

Mass Action Concentration Model of CaO–MgO–FeO–Al2O3–SiO2 Slag Systems and Its Application to the Formation Mechanism of MgO?EAl2O3 Spinel Type Inclusion in Casing Steel 17H. Tang, J. Li, and C. Ji

Theory Analysis of Steel Cleanliness Control during Electroslag Remelting 31C. Shi, X. Chen, Y. Luo, and H. Guo

Formation and Drop of Metal Droplets in Slag Bath of Electroslag Remelting Processes 39B. Li, R. Li, and B. Wang

Study on Flow–Reaction Desulfurization of RH by Physical Experiment 45H. Yang, J. Li, Z. Gao, F. Song, and W. Yang

Modeling of Transient Fluid Flow, Solidification Processes and Bubble Transport in Continuous Casting Mold 53Z. Liu, B. Li, and M. Jiang

Numerical Analysis of Coupled Fluid Flow, Heat Transfer and Solidification in Ultra–thick Slab Continuous Casting Mold 63X. Xie, D. Chen, M. Long, L. Zhang, J. Shen, and Y. Ma

Measurement and Observation of the Filling Process of Steel Castings 73J. Kang, G. Nie, H. Long, R. You, X. Hao, T. Wang, and C. Zheng

Physical Metallurgy of Metals

Influence of Load Paths and Bake Hardening Conditions on the Mechanical Properties of Dual Phase Steel 83M. Asadi, and H. Palkowski

The Effect of Phosphorus and Sulfur on the Crack Susceptibility of Continuous Casting Steel 89W. Wang, S. Luo, Z. Cai, and M. Zhu

Mathematical Modeling of Heat Transfer and Thermal Behaviour of Tool Steel H13 in Molten Aluminum Alloy A380 99T. Ding, J. Su, H. Hu, X. Nie, and R. Barron

Optimization Investigation on the Soft Reduction Parameters of Medium Carbon Microalloy Steel 109C. Xiao, J. Zhang, Y. Luo, L. Wu, and S. Wang

Effect of Microstructure Evolution on Hot Cracks of HSLA Steel during Hot Charge Process 117J. Li, Q. Wang, Y. Lu, B. Wang, and S. Zhang

A New Method for Ultrasonic Treatment on the Melt of Steel 125G. Nie, J. Kang, Y. Hu, R. You, J. Ma, Y. Hu, and T. Huang

Metallurgy of Non–Ferrous Metals

Corrosion Resistance of Zn–Sn Alloys Horizontally Directionally Solidified 135M. Parra, C. Mendez, C. Schvezov, and A. Ares

High Speed Twin Roll Casting of Al–33 wt. % Cu Strips with Layered Structure–Inspired by Mathematical Modeling 143S. Sahoo, and S. Ghosh

Finite Element Modeling of Material Removal Rate in Powder Mixed Electrical Discharge Machining of Al–SiC Metal Matrix Composites 151U. Vishwakarma, A. Dvivedi, and P. Kumar

Multicriteria Optimization of Rotary Tool Electric Discharge Machining on Metal Matrix Composite 159M. Cheema, A. Dvivedi, A. Sharma, and S. Biswas

Characterization of Pore Formation in A356 Alloy with Different Oxide Levels during Directional Solidification 169H. Liao, W. Song, and Q. Wang

Process Metallurgy of Non–Ferrous Metals

TMAH Wet Etching of Silicon Micro– and Nano–Fins for Selective Sidewall Epitaxy of III–Nitride Semiconductors 185L. Liu, D. Myasishchev, V. Kuryatkov, S. Nikishin, H. Harris, and M. Holtz

Purification of Indium by Vacuum Distillation 193Y. Deng, B. Yang, D. Li, B. Xu, and H. Xiong

Investigating Current Efficiency of Aluminum Electrolysis in NaF–KF–AlF3 System 199H. Ma, J. Xue, J. Li, and Y. Zhang

Recirculation of Materials and Environments

Effects of Ca and Na Containing Additives on WO3 Content in Sheelite Concentrates after Floatation Separation Process 209J. Zhu, J. Xue, and K. Liu

Copper Removal from Molybdenite by Sulfidation–Leaching Process 217R. Padilla, H. Letelier, and M. Ruiz

Physical Chemistry of Roasting and Leaching Reactions for Chromium Chemical Manufacturing and Its Impact on Environment – A Review 225S. Sanchez–Segado, and A. Jha

Electrophoretic Classification of Ultrafine Silica Particles in Dilute Aqueous Suspension 237R. Corpuz, and L. De Juan

QEMSCAN Analysis of Wadi–Shatti Iron Ore (Libya) 243A. Tajouri, P. Taylor, C. Anderson, and M. Abozbeda

Removal of Arsenic from Enargite Rich Copper Concentrates 249M. Ruiz, R. Bello, and R. Padilla

Effect of Calcium on the Solubility of Zinc Oxide in the Sodium Hydroxide Solution 257C. Ai–Liang, X. Dong, C. Xing–Yu, L. Xu–Heng, and Z. Wei–Xiong

Poster Session

Luminescence Enhancement of Sky–blue ZnS:Tm Phosphor by Promoter Doping 267S. Yang, and Y. Ling

Effect of Thermal History on the Hot Ductility and Fracture Mechanisms of Low Carbon Peritectic Steel 273Z. Dong, D. Chen, X. Zhang, and M. Long

Influence of Coriolis Force on the Flow Field of Combined Top and Bottom Blown Converter 281H. Tang, T. Zhang, J. Li, and Y. Chen

Motion Characteristics of a Powder Particle through the Injection Device with Slats at Finite Reynolds Number 291Z. Cheng, and M. Zhu

Study on Internal Cracks on Continuous Casting Slabs of AH36 Steel 305S. Yang, and L. Zhang

Author Index 315

Subject Index 317

Note: Product cover images may vary from those shown
3 of 3


4 of 3
Lifeng Zhang
Antoine Allanore
Cong Wang
James A. Yurko
Justin Crapps
Note: Product cover images may vary from those shown