+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)


Strengthening of Concrete Structures with Adhesively Bonded Reinforcement. Design and Dimensioning of CFRP Laminates and Steel Plates

  • ID: 2766368
  • Book
  • 158 Pages
  • John Wiley and Sons Ltd
1 of 3
Design and construction in existing contexts is becoming increasingly important, and often the structures sometimes of historical interest can be preserved easily and at minimum cost by employing strengthening measures. Existing concrete members can be strengthened by using adhesives to bond additional reinforcing elements onto or into those members. This book explains the design rules, together with their background, and uses examples to illustrate their use, specifically for slabs, beams and columns. Concrete member strengthening measures can take the form of, for example, flexural strengthening with externally bonded (surface–mounted) CFRP strips, CF sheets and steel plates, flexural strengthening with CFRP strips bonded in slots (near–surface–mounted reinforcement), shear strengthening with externally bonded CF sheets and steel plates, and column strengthening with CF sheets as confining reinforcement.

The explanations and background information provided are mainly based on the new German guideline Strengthening of Concrete Members with Adhesively Bonded Reinforcement by the German Committee for Structural Concrete (DAfStb). This is the first European guideline to regulate this topic in the form of a supplement to the Eurocode. As it is planned to produce a document in a future Eurocode 2, the DAfStb guideline serves as a starting point. The authors are extensively involved in the planning, design, operation and inspection of buildings for preservation and reconstruction, and in the updating of European Technical Approval Guidelines (ETAGs) and design rules.
Note: Product cover images may vary from those shown
2 of 3

1 Introduction

2 DAfStb guideline

2.1 The reasons for drawing up a guideline

2.2 Preparatory work

2.3 Work on the guideline

2.4 The structure and content of the guideline

2.5 Safety concept

2.6 Applications (Member to be strengthened, Strengthening systems, Ambient conditions, Fire protection)

2.7 Relationship with other regulations

2.8 Documents and assistance for practical applications

3 Design of strengthening measures with externally bonded CFRP strips

3.1 Principles

3.2 Verification of flexural strength

3.3 Bond analysis (Simplified method, More accurate method, Determining the crack spacing, Simplified analysis of element between cracks, End anchorage analysis)

3.4 Shear force analyses

3.5 Fatigue analysis

3.6 Analyses for the serviceability limit state

3.7 Detailing

4 Example 1: Strengthening a slab with externally bonded CFRP strips

5 Design of strengthening with near–surface–mounted CFRP strips

5.1 Principles

5.2 Verification of flexural strength

5.3 Bond analysis

5.4 Shear force analyses

5.5 Fatigue analysis

5.6 Analyses for the serviceability limit state

5.7 Detailing

6 Example 2: Strengthening a beam with near–surface–mounted CFRP strips

7 Design of column strengthening with CF sheets

7.1 Principles

7.2 Properties of CF sheets relevant to design

7.3 Load–carrying capacity of cross–section

7.4 Load–carrying capacity of member

7.5 Creep

7.6 Analysis at ultimate limit state

7.7 Analysis at serviceability limit state

8 Example 3: Column strengthening

9 Summary and outlook

Note: Product cover images may vary from those shown
3 of 3


4 of 3
Konrad Zilch
Roland Niedermeier
Wolfgang Finckh
Note: Product cover images may vary from those shown