Global DC Drive Market - Analysis by Deployment Location - Growth Trends and Forecasts 2017 - 2022

  • ID: 4386409
  • Report
  • Region: Global
  • 134 pages
  • Mordor Intelligence
1 of 3
The market for global DC Drive is expected to be USD XX billion at the end of the year 2015 and by the end of 2022 it is estimated to reach USDXX billion. The market for DC drivers is expected to grow at a rate of XX%. DC current based motor is the first motor that was created even before ac motors. The speed of the DC motors is directly proportional to the voltage and inversely proportional to the current. So by controlling the voltage the DC driver regulates the torque of the DC Motor. Through this regulation it is able to synchronise the operations of the DC motor and the load. DC drives employ Pulse width modulation (PWM) technique to synchronise the torque and speed. In this process the voltage is regulated to match the PWM signal.

DC drives have been in use since decades. Oil and gas industry extensively uses DC motors and in the process DC drives. Other domains where Dc motor is required, its controlling DC drives have also been used. Crane and Trolley operations, belts and conveyers in industries, compressors and pumps have also been using it. For textile and paper industry where it is required to have synchronization of multiple machines so that to have continuous roll of paper of cloth produced, DC drives are favoured. These are also used in machine tools, industrial blowers and fans.

DC drives are favoured because these are much simple to use and require less maintenance. In terms of price as compared to complicated Ac drives these are less costly. However the market for DC drivers has been following a global trend towards a shift to AC drives. Although this product has survived for decades buy this has been a gradual shift that is being observed.

DC DRIVE consists of several parts. This includes, DC Motor, firing circuit, electrical control system, speed control system, and Rectifier Bridge. DC drives are of several types i.e. Non-regenerative DC Drives, Regenerative DC Drives, and Converter Types. Non-regenerative ones are widely used and able to control speed and torque in only one direction. Regenerative Dc drive can control both speed and torque in multiple directions. The rectifier offers full conversion capability and half-wave conversion capability.

The popularity of DC drives has increased due its use in electrical vehicles (EV). Since due to increased global concerns for eco-friendly travel has increased, it has resulted in greater demand for DC motors and in the process DC drives. Exceptional torque handling capacity of the DC drive is its another critical attribute. The starting and accelerating torque which may reach up to 400% can be provided by the DC drives. Also regeneration of overhauling loads can be performed with DC drives. Dc drives convert AC power into DC power. This current is non liner and this harmonic distortions can be damaging to the electrical motors well as other connected equipment.

Key Deliverables:

1. Market analysis for the global DC drive Market, with region specific assessments and competition analysis on global and regional scales

2. Market definition along with the identification of key drivers and restraints

3. Identification of factors instrumental in changing the market scenarios, rising prospective opportunities, and identification of key companies that can influence this market on a global and regional scale

4. Extensively researched competitive landscape section with profiles of major companies along with their market shares

5. Identification and analysis of the macro and micro factors that affect the global DC drive market on both global and regional scales

6. A comprehensive list of key market players along with the analysis of their current strategic interests and key financial information

7. A wide-ranging knowledge and insights about the major players in this industry and the key strategies adopted by them to sustain and grow in the studied market

8. Insights on the major countries/regions in which this industry is blooming and to also identify the regions that are still untapped
Note: Product cover images may vary from those shown
2 of 3
1. Introduction
1.1 Study Deliverables
1.2 Market Definition
1.3 Sizing Units
1.4 Base Currency
1.5 Review and Forecast Period Years
2. Research Methodology
2.1 Introduction
2.2 Analysis Methodology
2.3 Econometric Forecast Model
2.4 Research Assumptions
3. Executive Summery
4. Key Inferences
5. Market Overview and Technology Trends
5.1 Current Market Scenario
5.2 Applications of Global DC Drives
5.3 Investment Analysis
5.4 Porters Five Forces Framework
5.5 Bargaining Power of Supplier
5.6 Bargaining Power of Consumer
5.7 Threat of New Entrants
5.8 Threat of Substitute of Products and Services
5.9 Competitive Rivalry Within The Industry
5.10 Drivers, Restraints, Opportunities, and Challenges Analysis (Endogenous Factors)
5.11 Market Drivers
5.11.1 Less Expensive
5.11.2 Simple Operations
5.12 Market Restraints
5.12.1 Preference of AC System over DC System
5.13 Key Challenges
5.13.1 Harmonic distortions with DC drives
5.14 Current Opportunities in the Market
5.14.1 Opportunities for Regeneration of Overhauling Loads
5.14.2 Demand from Electric Vehicles Market
5.14.3 Exceptional Torque Generation Capability
5.15 Technology Trends
5.15.1 New Developments
5.15.2 Industry Value Chain Analysis
5.15.3 Product Life-Cycle Analysis
5.15.4 Product Benchmarking
5.15.5 Global DC Drives Market, by Component
5.15.6 DC Motor
5.15.7 Firing Circuit
5.15.8 Electrical Control System
5.15.9 Speed Control Unit
6. Rectifier Bridge
7. Global DC Drives Market, by Type
7.1 Nonregenerative DC Drives
7.2 Regenerative DC Drives
7.3 Converter Types
8. Global DC Drives Market, by Industry Type
8.1 DC Motor
8.2 Crane and Trolley
8.3 Textile Industry
8.4 Paper Industry
8.5 Belts and Conveyors
8.6 Blower and Fan
8.7 Machine Tool
8.8 Pump
8.9 Compressor
9. Global DC Drives Market, by Geography – Regional Share and Forecasts
9.1 North America (NA)
9.1.1 Introduction
9.1.2 United States
9.1.3 Canada
9.1.4 Rest of North America
9.2 Europe
9.2.1 Introduction
9.2.2 Germany
9.2.3 United Kingdom
9.2.4 France
9.2.5 Italy
9.2.6 Spain
9.2.7 Russia
9.2.8 Rest of the Europe
9.3 Asia-Pacific (APAC)
9.3.1 Introduction
9.3.2 China
9.3.3 Japan
9.3.4 India
9.3.5 Australia
9.3.6 South Korea
9.3.7 Rest of Asia-Pacific
9.4 Middle-East and Africa (MEA)
9.4.1 Introduction
9.4.2 UAE
9.4.3 Saudi Arabia
9.4.4 Israel
9.4.5 Rest of the MEA
9.5 Latin America
9.5.1 Introduction
9.5.2 Brazil
9.5.3 Argentina
9.5.4 Mexico
9.5.5 Rest of Latin America
10. Competitive Landscape
10.1 Market Share Analysis
10.2 Organic and Inorganic Growth Strategies
10.3 Patent Analysis
10.4 The Challengers
10.5 Zero-Sum Quadrant
11. Key Vendor Analysis
11.1 Kirloskar Electric
11.2 Parker
11.3 Siemens
11.4 Schneider Electric
11.5 Emerson Industrial Automation
11.6 ABB Drives
11.7 Mitsubishi
11.8 Hitachi
11.9 Fuji Electric Global
11.10 Anaheim Automation
11.11 WEG
11.12 Yaskawa
12. Analyst Outlook for Investment Opportunities
13. Future Outlook of the Market
14. Appendix
Note: Product cover images may vary from those shown
3 of 3


4 of 3
Note: Product cover images may vary from those shown