Indonesia Adhesives market - Segmented by Type and Application - Trends and Forecasts 2017 - 2022

  • ID: 4390527
  • Report
  • Region: Indonesia
  • 119 pages
  • Mordor Intelligence
1 of 3
The Indonesia Adhesives Market was valued at USD 483.42 million in 2016 and is projected to reach USD 655.80 million by 2021, at a CAGR of 6.29% during the forecast period, 2016 to 2021. In terms of volume, the Indonesia Adhesive Market was valued at 169.01 kilo tons in 2016, and is projected to reach 208.98 kilo tons by 2021, growing at a CAGR of 4.34%, during the forecast period 2016-2021.

Adhesives and sealants are often grouped together, as they both are applied to the surfaces of materials to adhere and seal them together. They are generally available in the liquid form, which is viscous in nature, with no or little flow characteristics. Adhesives are majorly chosen for their bonding and holding power and have high tensile and shear strength. Adhesives are of two varieties, namely structural adhesives (strength is vital for the success of the assembly) and non-structural adhesives (generally have low strength, are used to bond weak substrates and for temporary fastening). However, sealants are majorly selected for their ability to resist relative movement of the substrates, to fill gaps, and to contain or exclude another material. They have less strength compared to adhesives, but are more flexible in nature.

Adhesives and sealants, owing to their ability to bind different materials together, are becoming an integral part of various commercial and industrial sectors. In this report, we have considered the following major end-user sectors:

Building and Construction
Paper, Board, and Packaging
Transportation
Woodworking and Joinery
Footwear and Leather
Healthcare
Electrical and Electronics
Others

The paper, board, and packaging segment accounted for over 20% share of the country's adhesive market in terms of revenue, in 2015.

This market is driven by factors, such as demand from the thriving automotive and construction industry. However, this market faces certain drawbacks, such as declining commodities sector in the country and government regulations regarding voc emissions. These factors may act as a roadblock to the growth of the market.

The Indonesia Adhesives market, based on technology, can be broadly segmented into water-borne adhesives, solvent-borne adhesives, reactive adhesives, hot melts adhesives, and others. These are again segmented according to the sub-segmentations of the technology. The Pressure Sensitive Adhesives Market, is segmented based on technology, application, resins and mode of application into respective sub-segments.

The rise in public investments due to monetary policy reforms will offer numerous opportunities for the growth of the adhesives market in the country. Some of major companies dominating the market for its products, services, and continuous product development are Henkel (PT. Henkel Indonesia), Sika Indonesia P.T., 3M (PT. 3M Indonesia), Dow Chemicals, PT. Aica Indria, Indochemie Jelyna Lemindo Prima and PT. Higo, to name a few

Key Deliverables:

1. Market analysis for the Indonesia Adhesives Market, with region specific assessments and competition analysis

2. Market definition along with the identification of key drivers and restraints

3. Identification of factors instrumental in changing the market scenarios, rising prospective opportunities, and identification of key companies that can influence this market

4. Extensively researched competitive landscape section with profiles of major companies along with their market shares

5. Identification and analysis of the macro and micro factors that affect the Indonesia Adhesives Market

6. A comprehensive list of key market players along with the analysis of their current strategic interests and key financial information

7. A wide-ranging knowledge and insights about the major players in this industry and the key strategies adopted by them to sustain and grow in the studied market
READ MORE
Note: Product cover images may vary from those shown
2 of 3
1. Introduction
1.1 Description
1.2 Research Methodology
1.3 Scope of the Study
2. Executive Summary
3. Market Insights
3.1 Overview
3.2 Industry Value Chain Analysis
3.3 Industry Attractiveness Porters Five Force Analysis
3.3.1 Bargaining Power of Suppliers
3.3.2 Bargaining Power of Buyers
3.3.3 Threat of New Entrants
3.3.4 Threat of Substitute Products and Services
3.3.5 Degree of Competition
4. Market Dynamics
4.1 Drivers
4.1.1 Increasing Adoption of Low-cost Flexible Packaging Aids
4.1.2 Demand from the Thriving Automotive and Construction Industry
4.2 Restraints
4.2.1 Government Regulations Regarding VOC Emissions
4.2.3 Declining commodities sector in the Country
4.3 Opportunities
4.3.1 Growing Popularity of Bio-Based Alternatives
4.3.3 Rise in Public Investments due to Monetary Policy Reforms
5. Market Segmentation and Analysis (Market Size, Growth and Forecast)
5.1 By Technology
5.1.1 Water-borne
5.1.1.1 Acrylics
5.1.1.2 Polyvinyl Acetate (PVA) Emulsion
5.1.1.3 Ethylene Vinyl Acetate (EVA) Emulsion
5.1.1.4 Polyurethane Dispersions (PU) & CR (Chloroprene Rubber) Latex
5.1.1.5 Others
5.1.2 Solvent-borne
5.1.2.1 Styrene-Butadiene Rubber (SBR)
5.1.2.2 Chloroprene Rubber
5.1.2.3 Poly Acrylate (PA)
5.1.2.4 Others
5.1.3 Reactive
5.1.3.1 Epoxy
5.1.3.2 Modified Acrylics
5.1.3.3 Silicone
5.1.3.4 Polyurethane
5.1.3.5 Cyanoacrylates
5.1.3.6 Others
5.1.4 Hot-melts
5.1.4.1 Ethyl Vinyl Acetate
5.1.4.2 Synthetic Rubbers
5.1.4.3 Others
5.1.5 Others
5.2 By End-user Industry
5.2.1 Building and Construction
5.2.2 Paper, Board, & Packaging
5.2.3 Woodworking & Joinery
5.2.4 Transportation
5.2.5 Footwear and Leather
5.2.6 Healthcare
5.2.7 Electrical and Electronics
5.2.8 Others
5.3 Pressure Sensitive Adhesives
5.3.1 By Technology
5.3.1.1 Water-Borne
5.3.1.2 Solvent-Borne
5.3.1.3 Hot Melt
5.3.1.4 Radiation Cured
5.3.2 By Application
5.3.2.1 Tapes
5.3.2.2 Labels
5.3.2.3 Graphics
5.3.2.4 Others
5.3.3 By Resins
5.3.3.1 Acrylics
5.3.3.2 Silicones
5.3.3.3 Elastomers
5.3.3.4 Other (PU, Epoxies, Vinyl Acetates, etc.)
5.3.3 By Mode of Application
5.3.3.1 Permanent
5.3.3.2 Removable
6. Potential Adhesive Customers
6.1 Adhesives Companies Water-Based
6.2 Adhesives Companies Solvent-Based
6.3 Adhesives Companies Hot-Melt
6.4 Adhesives Companies Reactive
6.5 Adhesives Companies Others
7. Competitive Landscape
7.1 Mergers & Acquisitions
7.2 Joint Ventures Collaborations and Agreements
7.3 Market Shares Analysis
7.4 Strategies Adopted by Leading Players
8. Company Profiles (Overview, Financials, Products and Services, and Recent Developments)
8.1. Global Manufacturers
8.1.1 Henkel (PT. Henkel Indonesia)
8.1.2 Sika Indonesia P.T.
8.1.3 3M (PT. 3M Indonesia)
8.1.4 Dow Chemicals
8.2. Local Manufacturers
8.2.1 PT. Dyno Indria /PT. Aica Indria
8.2.2 PT. Indochemie Jelyna Lemindo Prima
8.2.3 PT. Akr Corporindo Tbk, Through Its Subsidiary PT. Arjuna Utama Kimia (Aruki).
8.2.4 Lemindo Group
8.2.5 Makro Rekat Sekawan
8.2.6 Moresco
8.2.7 Nan Pao Group
8.2.8 PT. ArindcoIndonesia
8.2.9 PT. Higo
8.2.10 PT. Jowat
9. Disclaimer
Note: Product cover images may vary from those shown
3 of 3

Loading
LOADING...

4 of 3
Note: Product cover images may vary from those shown
Adroll
adroll