The Asia Pacific heat shrink tubing market is expected to grow from US$ 819.62 million in 2022 to US$ 1,194.90 million by 2028. It is estimated to grow at a CAGR of 6.5% from 2022 to 2028.
An automated heat shrink tubing consists of an instrumented heat chamber on a linear positioning system fitted with heat guns. The chamber design directs the hot air from the heat guns onto the wire harness uniformly with the help of radially distributed channels. A control unit continuously manages the actuator position by measuring the chamber's speed and temperature. In automated heat shrink tubing, the workpieces are loaded into a machine and automatically passed through a heating tunnel. These machines can address the precise shrinkage specifications due to the automatic movement of workpieces.
Many aircraft, automobiles, and spacecraft require large bundles of wires that would stretch over several kilometers, if extended fully. Putting all these wires into an automated heat shrink tubing can save time, mitigate risk of an electrical short, provides a standardized process, and installation time can be significantly decreased, as well as provides protection against adverse effects of vibrations, abrasions, and moisture.
Thus, owing to the benefits provided, automation of heat shrink tubing is emerging as a significant trend in the Asia Pacific heat shrink tubing market.
The region over the years has also experienced a rise in urbanization rate. According to the data published by the World Bank, India experienced a rise in urban population by 2.32% in 2021. Moreover, 61% of the total population of China is now living in urban areas. According to the same source, the increasing disposable income and growing technology adoption in China are further expected to boost the demand for various smart home technologies in order to develop connected homes.
This is expected to propel the demand for various wires across the residential sector, thereby contributing to the growth of the Asia Pacific heat shrink tubing market in APAC.
The region homes two of the most fastest developing countries - China and India. Both countries are experiencing rapid infrastructural development in both residential and commercial sectors. A few of the major developments are mentioned below:
• The Chinese MOT in 2018 announced its plans to have 400 airports by 2035, while 240 airports are already constructed, and 160 airports will be completed by 2035. Additionally, the aviation ministry in October 2022 announced its plans to construct 80 new airports in the next 5 years.
• The Delhi government in August 2022 announced its intention to develop 11 new hospitals with more than 10,000 beds in upcoming years. Similarly, in March 2022, the state government announced its plans to upgrade 49 hospitals for setting up a medical complex in Pune over the next five years.
These infrastructural developments across China and India are directly triggering the need for several wires and cables for installation purposes across the buildings for proper network and power connections. These factors are thereby expected to boost the growth of the APAC heat shrink tubing market size.
Sumitomo Electric Industries Ltd, Shenzhen Woer Heat - Shrinkable Material Co. Ltd., and Shanghai Changyuan Electronic Material Co. Ltd are a few major heat shrink tubing market players operating in Asia Pacific.
Based on voltage, the Asia Pacific heat shrink tubing market is segmented into low voltage (less than 5kv), medium voltage (5-35 kv), and high voltage (above 35kv). In 2022, the low voltage (less than 5kv) segment registered a largest share in the Asia Pacific heat shrink tubing market.
Based on material, the Asia Pacific heat shrink tubing market is segmented into polyolefin, polytetrafluoroethylene, fluorinated ethylene propylene, perfluoro alkoxy alkane, polyvinylidene fluoride, and others. In 2022, the polyolefin segment registered a largest share in the Asia Pacific heat shrink tubing market.
Based on end user, the Asia Pacific heat shrink tubing market is segmented into energy, utilities, electrical power, infrastructure/building construction, industrial, telecommunication, automotive, aerospace, defense, mass transit and mobility, medical, petrochemical, and mining. In 2022, the utilities segment registered a largest share in the Asia Pacific heat shrink tubing market. The energy segment is further segmented into renewable and non-renewable.
The utilities segment is further segmented into electricity, natural gas, steam supply, water supply, and sewage removal. The electrical power segment is further segmented into power generation, power transmission , and power distribution. The infrastructure/building construction segment is further segmented into residential & commercial, data centers, distribution, HVAC, and infrastructure. The industrial segment is further segmented into residential & commercial, data centers, distribution, HVAC, and infrastructure. The industrial segment is further segmented into industrial equipment and industrial electrical. The telecommunication segment is further segmented into wireless, broadband, CATV, and others. The automotive segment is further segmented into heavy duty machinery and agriculture, EV vehicles, hybrid vehicles, diesel vehicles, gasoline vehicles, and autonomous vehicles. The aerospace segment is further segmented into commercial aircraft, space exploration, and others. The defense segment is further segmented into military aircraft, military equipment & machinery, and others. The mass transit and mobility segment is further segmented into mass transit and mobility. The medical segment is further segmented into high temperature (150 C>) and low temperature (< 150 C).
Based on country, the Asia Pacific heat shrink tubing market is segmented into China, Japan, India, South Korea, Australia, and the Rest of Asia Pacific. In 2022, China segment registered a largest share in the Asia Pacific heat shrink tubing market.
3M Co, HellermannTyton Ltd, Molex LLC, Sumitomo Electric Industries Ltd, TE Connectivity Ltd, Zeus Industrial Products Inc, Shenzhen Woer Heat-Shrinkable Material Co Ltd, and Shanghai Changyuan Electronic Material Co Ltd are some of the leading companies operating in the Asia Pacific heat shrink tubing market.
Reasons to Buy
Automation of Heat Shrink Tubing Drive Asia Pacific Heat Shrink Tubing Market
Heat shrink tubing is used to insulate wire conductors, as well as protect and seal cables. Performing heat shrink tubing manually can invite risk, apart from being a time-consuming process. Automating this process minimizes the operators' direct interaction with wires, decreases production costs over the long term, and dramatically improves quantitative and qualitative production indicators.An automated heat shrink tubing consists of an instrumented heat chamber on a linear positioning system fitted with heat guns. The chamber design directs the hot air from the heat guns onto the wire harness uniformly with the help of radially distributed channels. A control unit continuously manages the actuator position by measuring the chamber's speed and temperature. In automated heat shrink tubing, the workpieces are loaded into a machine and automatically passed through a heating tunnel. These machines can address the precise shrinkage specifications due to the automatic movement of workpieces.
Many aircraft, automobiles, and spacecraft require large bundles of wires that would stretch over several kilometers, if extended fully. Putting all these wires into an automated heat shrink tubing can save time, mitigate risk of an electrical short, provides a standardized process, and installation time can be significantly decreased, as well as provides protection against adverse effects of vibrations, abrasions, and moisture.
Thus, owing to the benefits provided, automation of heat shrink tubing is emerging as a significant trend in the Asia Pacific heat shrink tubing market.
Asia Pacific Heat Shrink Tubing Market Overview
Population across countries such as India, Malaysia, Singapore, and China are actively adopting various smart home technologies, including smart light and IoT devices.The region over the years has also experienced a rise in urbanization rate. According to the data published by the World Bank, India experienced a rise in urban population by 2.32% in 2021. Moreover, 61% of the total population of China is now living in urban areas. According to the same source, the increasing disposable income and growing technology adoption in China are further expected to boost the demand for various smart home technologies in order to develop connected homes.
This is expected to propel the demand for various wires across the residential sector, thereby contributing to the growth of the Asia Pacific heat shrink tubing market in APAC.
The region homes two of the most fastest developing countries - China and India. Both countries are experiencing rapid infrastructural development in both residential and commercial sectors. A few of the major developments are mentioned below:
• The Chinese MOT in 2018 announced its plans to have 400 airports by 2035, while 240 airports are already constructed, and 160 airports will be completed by 2035. Additionally, the aviation ministry in October 2022 announced its plans to construct 80 new airports in the next 5 years.
• The Delhi government in August 2022 announced its intention to develop 11 new hospitals with more than 10,000 beds in upcoming years. Similarly, in March 2022, the state government announced its plans to upgrade 49 hospitals for setting up a medical complex in Pune over the next five years.
These infrastructural developments across China and India are directly triggering the need for several wires and cables for installation purposes across the buildings for proper network and power connections. These factors are thereby expected to boost the growth of the APAC heat shrink tubing market size.
Sumitomo Electric Industries Ltd, Shenzhen Woer Heat - Shrinkable Material Co. Ltd., and Shanghai Changyuan Electronic Material Co. Ltd are a few major heat shrink tubing market players operating in Asia Pacific.
Asia Pacific Heat Shrink Tubing Market Revenue and Forecast to 2028 (US$ Million)
Asia Pacific Heat Shrink Tubing Market Segmentation
The Asia Pacific heat shrink tubing market is segmented into voltage, material, end user, and country.Based on voltage, the Asia Pacific heat shrink tubing market is segmented into low voltage (less than 5kv), medium voltage (5-35 kv), and high voltage (above 35kv). In 2022, the low voltage (less than 5kv) segment registered a largest share in the Asia Pacific heat shrink tubing market.
Based on material, the Asia Pacific heat shrink tubing market is segmented into polyolefin, polytetrafluoroethylene, fluorinated ethylene propylene, perfluoro alkoxy alkane, polyvinylidene fluoride, and others. In 2022, the polyolefin segment registered a largest share in the Asia Pacific heat shrink tubing market.
Based on end user, the Asia Pacific heat shrink tubing market is segmented into energy, utilities, electrical power, infrastructure/building construction, industrial, telecommunication, automotive, aerospace, defense, mass transit and mobility, medical, petrochemical, and mining. In 2022, the utilities segment registered a largest share in the Asia Pacific heat shrink tubing market. The energy segment is further segmented into renewable and non-renewable.
The utilities segment is further segmented into electricity, natural gas, steam supply, water supply, and sewage removal. The electrical power segment is further segmented into power generation, power transmission , and power distribution. The infrastructure/building construction segment is further segmented into residential & commercial, data centers, distribution, HVAC, and infrastructure. The industrial segment is further segmented into residential & commercial, data centers, distribution, HVAC, and infrastructure. The industrial segment is further segmented into industrial equipment and industrial electrical. The telecommunication segment is further segmented into wireless, broadband, CATV, and others. The automotive segment is further segmented into heavy duty machinery and agriculture, EV vehicles, hybrid vehicles, diesel vehicles, gasoline vehicles, and autonomous vehicles. The aerospace segment is further segmented into commercial aircraft, space exploration, and others. The defense segment is further segmented into military aircraft, military equipment & machinery, and others. The mass transit and mobility segment is further segmented into mass transit and mobility. The medical segment is further segmented into high temperature (150 C>) and low temperature (< 150 C).
Based on country, the Asia Pacific heat shrink tubing market is segmented into China, Japan, India, South Korea, Australia, and the Rest of Asia Pacific. In 2022, China segment registered a largest share in the Asia Pacific heat shrink tubing market.
3M Co, HellermannTyton Ltd, Molex LLC, Sumitomo Electric Industries Ltd, TE Connectivity Ltd, Zeus Industrial Products Inc, Shenzhen Woer Heat-Shrinkable Material Co Ltd, and Shanghai Changyuan Electronic Material Co Ltd are some of the leading companies operating in the Asia Pacific heat shrink tubing market.
Reasons to Buy
- Save and reduce time carrying out entry-level research by identifying the growth, size, leading players, and segments in the Asia Pacific heat shrink tubing market.
- Highlights key business priorities in order to assist companies to realign their business strategies
- The key findings and recommendations highlight crucial progressive industry trends in the Asia Pacific heat shrink tubing market, thereby allowing players across the value chain to develop effective long-term strategies
- Develop/modify business expansion plans by using substantial growth offering developed and emerging markets
- Scrutinize in-depth Asia Pacific market trends and outlook coupled with the factors driving the heat shrink tubing market, as well as those hindering it
- Enhance the decision-making process by understanding the strategies that underpin commercial interest with respect to client products, segmentation, pricing, and distribution
Table of Contents
1. Introduction
3. Research Methodology
4. Asia Pacific Heat Shrink Tubing Market Landscape
5. Asia Pacific Heat Shrink Tubing Market- Key Market Dynamics
6. Heat Shrink Tubing Market- Asia Pacific Market Analysis
7. Asia Pacific Heat Shrink Tubing Market Revenue and Forecast to 2028 - By Voltage
8. Asia Pacific Heat Shrink Tubing Market Revenue and Forecast to 2028 - By Material
9. Asia Pacific Heat Shrink Tubing Market Revenue and Forecast to 2028 - By End User
10. Asia Pacific Heat Shrink Tubing Market - Country Analysis
11. Industry Landscape
12. Company Profiles
13. Appendix
List of Tables
List of Figures
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- 3M Co
- HellermannTyton Ltd
- Molex LLC
- Shanghai Changyuan Electronic Material Co Ltd
- Shenzhen Woer Heat-Shrinkable Material Co Ltd
- Sumitomo Electric Industries Ltd
- TE Connectivity Ltd
- Zeus Industrial Products Inc
