+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

Container Handling Equipment Market by Type, Tonnage, Propulsion, Engine Capacity, Power Output - Global Forecast to 2025

  • PDF Icon

    Report

  • 147 Pages
  • March 2018
  • Region: Global
  • Markets and Markets
  • ID: 4471533

Container Handling Equipment Market by Type (ASC, STS, MHC, RTG, RMG, EMPTY and Laden FLT, Straddle Carrier, Reach Stacker, Terminal Tractor), Tonnage (<10 T, 10-40 T, 41-70 T, 71-100 T), Propulsion, Engine Capacity, Power Output - Global Forecast to 2025

The increase in cargo transportation and need for automation to handle increased cargo volumes is expected to drive the market for automated container handling equipment, while increased stringency in emission regulations shall drive the demand for electric and hybrid equipment.

The container handling equipment market is projected to grow at a CAGR of 4.24%, during the forecast period, to reach a market size of USD 8.75 billion by 2025, from an estimated USD 6.28 billion in 2017. Increased focus on fleet-level emission reduction supported by rising stringency in emission norms and growing emphasis on port automation are the key drivers for this market. Alternatively, the high capital costs of container handling equipment and lack of synchronization among different equipment can hinder the growth of the market.

The 41-70 tons segment is projected to grow at the highest rate during the forecast period.

The 41-70 tons segment is estimated to be the fastest-growing market during the forecast period. According to the Port Equipment Manufacturers’ Association, of the total number of ship-to-shore cranes and rubber-tired gantry cranes sold in 2015, around 79.3% and 64.2%, respectively, were in the 41-70 ton range. Also, other equipment types such as straddle carriers, reach stackers, and mobile harbor cranes are offered in this tonnage capacity range. Growing containerized traffic in this capacity range at key port terminals is expected to drive the 41-70 tons container handling equipment market.

The >10 liter segment is estimated to hold the largest share of the container handling equipment market, by engine capacity.

Equipment such as mobile harbor cranes, laden forklift trucks, straddle carriers and reach stackers are used to stack laden containers. This equipment is used for extended periods under harsh conditions and therefore requires powerful and efficient engines that deliver optimum performance with minimal maintenance. The demand for higher capacity engines is greater in Asia Pacific, Europe, and the Middle East due to the increased container throughput in these regions. The port terminals in countries such as China, Singapore, Germany, South Korea, and the UAE handle around ~15-35 million TEUs every year and which will increase in the future. Hence, to cater to the increased demand, these port terminals require equipment with powerful engines for smooth and reliable operation.

Asia Pacific: The largest and fastest-growing container handling equipment market from 2017 to 2025.

The market in Asia Pacific is expected to lead the container handling equipment market, in terms of value, during the forecast period. Countries such as China, Japan, Singapore, South Korea, and India are the key markets for such equipment. As per the World Shipping Council, of the top 10 container port terminals in terms of maximum volume in 2015, 7 are located in China with a capacity of around 130.2 million TEUs annually, followed by Singapore, South Korea, and the UAE. Furthermore, the ports of Shanghai (China), Singapore, Shenzhen (China), Hong Kong, S.A.R. (China), and Busan (South Korea) handle more than 19 million TEU annually. Additionally, the small and medium ports in countries such as India, Thailand, and Malaysia offer potential for the growth of this market.

BREAKDOWN OF PRIMARIES

The study contains insights provided by various industry experts, ranging from equipment manufacturers, shipping authorities, and distributors. The break-up of the primaries is as follows:

  • By Company Type: Equipment Manufacturers - 52%, Shipping Authorities - 26%, and Distributors - 22%
  • By Designation: C-level - 55%, D-Level - 38%, and Others -7%
  • By Region: Americas - 42%, Europe - 37%, and Asia Pacific- 21%

The report provides detailed profiles of the following companies:

  • Kalmar (Finland)
  • Konecranes (Finland)
  • Liebherr (Switzerland)
  • Hyster (US)
  • Sany (China)
  • ZPMC (China)
  • Lonking (China)
  • Anhui Heli (China)
  • CVS Ferrari (Italy)
  • Hoist Liftruck (US)

Research Coverage
The primary objective of the study is to define, describe, and forecast the container handling equipment market by equipment type, tonnage capacity, propulsion type, engine capacity, power output, and region. It analyzes the opportunities offered by various segments of the market to stakeholders. It tracks and analyzes the competitive developments such as market share analysis, expansions, joint ventures, acquisitions, and other industrial activities carried out by key industry participants.

Reasons to Buy this Report

  • The study provides qualitative and quantitative analyses of the various equipment types represented in terms of volume (units) and value (USD million) while all other segments are represented in terms of volume (units).
  • The 10 key companies that have a significant impact on the market have been profiled along with their financial structures, recent developments, and product portfolios.
  • The report covers the competitive landscape, which reflects the market share analysis of leading players along with the dominant strategies adopted by these stakeholders to retain their positions.

Table of Contents

1 Introduction
1.1 Objectives of the Study
1.2 Market Definition
1.3 Market Scope
1.3.1 Markets Covered
1.3.2 Years Considered for the Study
1.4 Currency
1.5 Package Size
1.6 Limitations
1.7 Stakeholders
2 Research Methodology
2.1 Research Data
2.2 Secondary Data
2.3 Primary Data
2.3.1 Sampling Techniques & Data Collection Methods
2.3.2 Primary Participants
2.4 Factor Analysis
2.4.1 Demand-Side Analysis
2.4.2 Supply-Side Analysis
2.5 Market Estimation
2.5.1 Bottom-Up Approach
2.5.2 Top-Down Approach
2.6 Market Breakdown & Data Triangulation
2.7 Assumptions
3 Executive Summary
4 Premium Insights
4.1 Container Handling Equipment Market
4.2 Container Handling Equipment Market, By Region
4.3 Container Handling Equipment Market, By Equipment Type
4.4 Container Handling Equipment Market, By Tonnage Capacity
4.5 Container Handling Equipment Market, By Propulsion Type
4.6 Container Handling Equipment Market, By Engine Capacity
4.7 Container Handling Equipment Market, By Power Output
5 Market Overview
5.1 Introduction
5.2 Market Dynamics
5.2.1 Drivers
5.2.1.1 Increase in Cargo Transportation Around the World
5.2.1.2 Rising Demand for Container Handling Equipment in Asia Pacific & the Middle East
5.2.2 Restraints
5.2.2.1 High Capital Costs of Container Handling Equipment
5.2.3 Opportunities
5.2.3.1 Impact of Increasing Stringency in Emission Regulations
5.2.3.1.1 Increasing Opportunities for Engine & After-Treatment Device Suppliers
5.2.3.1.2 Growing Innovations in Hybrid & Electric Container Handling Equipment
5.2.3.2 Growing Automation Level in Container Handling Equipment
5.2.4 Challenges
5.2.4.1 Lack of Synchronization Between Different Port Equipment
5.3 Macro-Indicator Analysis
5.3.1 Introduction
5.3.1.1 Goods and Services Export as A Percentage of GDP
5.3.1.2 GDP (USD Billion
5.3.1.3 GNI Per Capita, Atlas Method (USD)
5.3.1.4 GDP Per Capita PPP (USD)
5.3.2 Macro Indicators Influencing the Container Handling Equipment Market for Top 3 Countries
5.3.2.1 China
5.3.2.2 US
5.3.2.3 Germany
6 Container Handling Equipment Market, By Equipment Type
Note - The Chapter is Further Segmented at Regional Level and Considered Regions are Asia Pacific, EMEA, and Americas
6.1 Introduction
6.2 Automated Stacking Crane (ASC)
6.3 Empty Container Handling Forklift Truck (FLT)
6.4 Laden Forklift Truck (FLT)
6.5 Mobile Harbor Crane (MHC
6.6 Rail Mounted Gantry (RMG) Crane
6.7 Reach Stacker
6.8 Rubber Tired Gantry (RTG) Crane
6.9 Ship to Shore (STS) Crane
6.10 Straddle Carrier
6.11 Terminal Tractor
7 Container Handling Equipment Market, By Tonnage Capacity
Note - The Chapter is Further Segmented at Regional Level and Considered Regions are Asia Pacific, EMEA, and Americas
7.1 Introduction
7.2 <10 Tons
7.3 10-4o Tons
7.4 41-70 Tons
7.5 71-100 Tons
8 Container Handling Equipment Market, By Propulsion Type
Note - The Chapter is Further Segmented at Regional Level and Considered Regions are Asia Pacific, EMEA, and Americas
8.1 Introduction
8.2 Diesel
8.3 Electric
8.4 Hybrid
9 Container Handling Equipment Market, By Engine Capacity
Note - The Chapter is Further Segmented at Regional Level and Considered Regions are Asia Pacific, EMEA, and Americas
9.1 Introduction
9.2 <7 Liter
9.3 7-10 Liter
9.4 >10 Liter
10 Container Handling Equipment Market, By Power Output
Note - The Chapter is Further Segmented at Regional Level and Considered Regions are Asia Pacific, EMEA, and Americas
10.1 Introduction
10.2 <150 kW
10.3 150-200 kW
10.4 201–300 kW
10.5 >300 kW
11 Container Handling Equipment Market, By Region
Note - The Chapter is Further Segmented By Tonnage Capacity (<10 Tons, 10-4o Tons, 41-70 Tons, and 71-100 Tons) at Country Level
11.1 Introduction
11.2 Asia Pacific
11.2.1 Australia
11.2.2 China
11.2.3 India
11.2.4 Japan
11.2.5 South Korea
11.2.6 Singapore
11.3 EMEA
11.3.1 Germany
11.3.2 Spain
11.3.3 UK
11.3.4 UAE
11.3.5 Saudi Arabia
11.3.6 Turkey
11.4 Americas
11.4.1 Brazil
11.4.2 Canada
11.4.3 Columbia
11.4.4 Mexico
11.4.5 US
12 Competitive Landscape
12.1 Overview
12.2 Container Handling Equipment Market: Market Share Analysis
12.3 Competitive Scenario
12.3.1 Contracts & Agreements
12.3.2 New Product Developments
12.3.3 Expansions
12.3.4 Mergers & Acquisitions
13 Company Profiles
(Overview, Products Offered, Recent Developments, SWOT Analysis, Author's View)*
13.1 Kalmar
13.2 Konecranes
13.3 Liebherr
13.4 Hyster
13.5 Sany
13.6 ZPMC
13.7 Lonking Machinery
13.8 Anhui Heli
13.9 CVS Ferrari
13.10 Hoist Liftruck
*Details on Overview, Products Offered, Recent Developments, SWOT Analysis, MnM View Might Not Be Captured in Case of Unlisted Companies.
14 Appendix
14.1 Insights of Industry Experts
14.2 Discussion Guide
14.4 Available Customizations
14.4.1 Automated Stacking Crane Market, By Tonnage Capacity
14.4.1.1 10-40 Tons
14.4.1.2 41-70 Tons
14.4.2 Rail Mounted Gantry Crane Market, By Tonnage Capacity
14.4.2.1 10-40 Tons
14.4.2.2 41-70 Tons
14.4.3 Reach Stacker Market, By Tonnage Capacity
14.4.3.1 10-40 Tons
14.4.3.2 41-70 Tons
14.4.4 Rubber Tired Gantry Crane Market, By Tonnage Capacity
14.4.4.1 10-40 Tons
14.4.4.2 41-70 Tons
14.4.5 Ship to Shore Crane Market, By Tonnage Capacity
14.4.5.1 10-40 Tons
14.4.5.2 41-70 Tons
14.4.5.3 71-100 Tons
14.4.6 Container Handling Equipment After Treatment Technologies Market, By Region
Note: The Segment Covers the Container Handling Equipment Market By Above Mentioned After Treatment Technologies for Equipment Type: Rubber Tired Gantry Crane, Laden Forklift Trucks, Reach Stackers and Terminal Tractors at Regional Level – Asia Pacific, EMEA, and Americas
14.4.6.1 Diesel Particulate Filter
14.4.6.2 Selective Catalytic Reduction
14.4.6.3 Turbocharger
14.4.7 Laden Forklift Truck Market, By Engine Capacity
14.4.7.1 7-10 Liter
14.4.7.2 >10 Liter
14.4.8 Reach Stacker Market, By Engine Capacity
14.4.8.1 7-10 Liter
14.4.8.2 >10 Liter
14.4.9 Rubber Tired Gantry Crane Market, By Tonnage Capacity
14.4.9.1 7-10 Liter
14.4.9.2 >10 Liter
14.4.10 Detailed Analysis and Profiling of Additional Market Players (Upto
14.5 Related Reports
14.6 Author Details
List of Tables
Table 1 Currency Exchange Rates (W.R.T. USD)
Table 2 Mix of Adopted Strategies By Key Players in the Industry, 2016–2018
Table 3 Average Cost of Different Equipment Types
Table 4 Emission Norms Comparative Analysis for Non-Road Vehicles: US Epa vs Eu Emission Standards
Table 5 Container Handling Equipment Market, By Equipment Type, 2015–2025 (Units
Table 6 Container Handling Equipment Market, By Equipment Type, 2015–2025 (USD Million
Table 7 Automated Stacking Crane (ASC): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 8 Automated Stacking Crane (ASC): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 9 Empty Container Handling Forklift Truck (FLT): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 10 Empty Container Handling Forklift Truck (FLT): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 11 Laden Forklift Truck (FLT): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 12 Laden Forklift Truck (FLT): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 13 Mobile Harbor Crane (MHC): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 14 Mobile Harbor Crane (MHC): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 15 Rail Mounted Gantry Crane (RMG): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 16 Rail Mounted Gantry Crane (RMG): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 17 Reach Stacker: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 18 Reach Stacker: Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 19 Rubber Tired Gantry Crane (RTG): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 20 Rubber Tired Gantry Crane (RTG): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 21 Ship to Shore Crane (STS): Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 22 Ship to Shore Crane (STS): Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 23 Straddle Carrier: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 24 Straddle Carrier: Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 25 Terminal Tractor: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 26 Terminal Tractor: Container Handling Equipment Market, By Region, 2015–2025 (USD Million
Table 27 Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 28 <10 Tons: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 29 10-40 Tons: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 30 41-70 Tons: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 31 71-100 Tons: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 32 Container Handling Equipment Manufacturer Key Offerings, By Propulsion Type
Table 33 Container Handling Equipment Market, By Propulsion Type, 2015–2025 (Units
Table 34 Diesel: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 35 Electric: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 36 Hybrid: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 37 Container Handling Equipment Market, By Engine Capacity, 2015–2025 (Units
Table 38 <7 Liter: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 39 7-10 Liter: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 40 >10 Liter: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 41 Container Handling Equipment Market, By Power Output, 2015–2025 (Units
Table 42 <150 kW: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 43 150-200 kW: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 44 201–300 kW: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 45 >300 kW: Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 46 Container Handling Equipment Market, By Region, 2015–2025 (Units
Table 47 Asia Pacific: Container Handling Equipment Market, By Country, 2015–2025 (Units
Table 48 Australia: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 49 China: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 50 India: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 51 Japan: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 52 South Korea: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 53 Singapore: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 54 EMEA: Container Handling Equipment Market, By Country, 2015–2025 (Units
Table 55 Germany: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 56 Spain: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 57 UK: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 58 UAE : Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 59 Saudi Arabia: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 60 Turkey: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 61 Americas: Container Handling Equipment Market, By Country, 2015–2025 (Units
Table 62 Brazil: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 63 Canada: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 64 Columbia: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 65 Mexico: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 66 US: Container Handling Equipment Market, By Tonnage Capacity, 2015–2025 (Units
Table 67 Contracts & Agreements, 2017-2018
Table 68 New Product Developments, 2016-2017
Table 69 Expansions, 2015-2017
Table 70 Mergers & Acquisitions, 2017
List of Figures
Figure 1 Market Segmentation: Container Handling Equipment Market
Figure 2 Container Handling Equipment Market: Research Design
Figure 3 Research Design Model
Figure 4 Breakdown of Primary Interviews: By Company Type, Designation, & Region
Figure 5 Export vs Import of Goods, 1995–2015
Figure 6 Market Size Estimation Methodology: Bottom-Up Approach
Figure 7 Market Size Estimation Methodology: Top-Down Approach
Figure 8 Data Triangulation
Figure 9 Container Handling Equipment Market, By Country, 2017 vs 2025 (Units)
Figure 10 Container Handling Equipment Market, By Equipment Type, 2017 vs 2025 (USD Billion)
Figure 11 Container Handling Equipment Market, By Tonnage Capacity, 2017 vs 2025 (Units)
Figure 12 Container Handling Equipment Market, By Propulsion Type, 2017 vs 2025 (Units)
Figure 13 Container Handling Equipment Market, By Engine Capacity, 2017 vs 2025 (Units)
Figure 14 Container Handling Equipment Market, By Power Output, 2017 vs 2025 (Units)
Figure 15 Attractive Growth Opportunities for Electric & Hybrid Container Handling Equipment
Figure 16 Asia Pacific is Estimated to Be the Leading Market, Whereas Ship to Shore Crane is Estimated to Be the Largest Equipment Type Market (By Value)
Figure 17 Automated Stacking Crane is Estimated to Be the Fastest Growing Market Among All Equipment, During Forecast Period (By Value)
Figure 18 41-70 Tons Segment is Estimated to Dominate the Container Handling Equipment Market, During Forecast Period (By Volume)
Figure 19 Electric Propulsion Type Segment is Estimated to Grow at the Highest CAGR for Container Handling Equipment Market, During Forecast Period (By Volume)
Figure 20 >10 Liter Segment is Estimated to Dominate the Container Handling Equipment Market, During Forecast Period (By Volume)
Figure 21 201-300 kW Segment is Estimated to Hold the Largest Market Share of Container Handling Equipment, During Forecast Period (By Volume)
Figure 22 Container Handling Equipment: Market Dynamics
Figure 23 Global Seaborne Trade, 2015 (Million Tons Loaded)
Figure 24 Global Containerized Trade, 2011–2016 (Million Teu)
Figure 25 Top 10 Port Terminals Capacity (Million Teu)
Figure 26 China: Rising PCI and Reviving Financial Markets Expected to Drive the Domestic Demand During the Forecast Period
Figure 27 US: Rising GNI Per Capita and Demand of Luxirious Commodities Expected to Drive the Demand During the Forecast Period
Figure 28 Germany: Rising Trend Towards Port Automation Will Drive the Demand in Coming Years
Figure 29 Container Handling Equipment Market, By Equipment Type, 2017 vs 2025 (USD Million)
Figure 30 Container Handling Equipment Market Share, By Tonnage Capacity, 2017 vs 2025 (Units)
Figure 31 Container Handling Equipment Market, By Propulsion Type, 2017 vs 2025 (Units)
Figure 32 Container Handling Equipment Market, By Engine Capacity, 2017 vs 2025 (Units)
Figure 33 Container Handling Equipment Market, By Power Output, 2017 vs 2025 (Units)
Figure 34 Container Handling Equipment Market, By Region, 2017 vs 2025 (Units)
Figure 35 Asia Pacific: Container Handling Equipment Market Snapshot
Figure 36 EMEA: Container Handling Equipment Market Snapshot
Figure 37 Americas: Container Handling Equipment Market, By Country, 2017 vs 2025 (Units)
Figure 38 Companies Adopted Contracts & Agreements as the Key Growth Strategy, 2015–2018
Figure 39 Container Handling Equipment: Market Share Analysis, 2016
Figure 40 Kalmar: Company Snapshot
Figure 41 Kalmar: SWOT Analysis
Figure 42 Konecranes: Company Snapshot
Figure 43 Konecranes: SWOT Analysis
Figure 44 Liebherr: Company Snapshot
Figure 45 Liebherr: SWOT Analysis
Figure 46 Hyster: Company Snapshot
Figure 47 Hyster: SWOT Analysis
Figure 48 Sany: SWOT Analysis
Figure 49 Lonking Machinery: Company Snapshot
Figure 50 Anhui Heli: Company Snapshot

Samples

Loading
LOADING...

Companies Mentioned

  • Anhui Heli
  • CVS Ferrari
  • Hoist Liftruck
  • Hyster
  • Kalmar
  • Konecranes
  • Liebherr
  • Lonking Machinery
  • Sany
  • ZPMC