+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

Hydraulic Rubber Dam. An Effective Water Management Technology. Plastics Design Library

  • Book

  • December 2018
  • Elsevier Science and Technology
  • ID: 4519348

Hydraulic Rubber Dam: An Effective Water Management Technology is the go-to source for information on the materials, manufacture, mechanics and functional benefit of rubber dams in water management. Readers will find a detailed background on water conservation and coverage, how inflatable rubber dam technology contributes to the picture, and information on the proper manufacture and use of rubber dams to increase water storage for release and delivery during drought. In addition, the book presents tactics on the even distribution of water across populations, how to increase water use efficiency, conservation, and how to prevent flooding.

In particular, this book details specialist manufacturing techniques, including the development of rubber compounds and fabric, the bonding and anchoring systems which hold the rubber dam to the underlying concrete structure, and inflation and deflation mechanisms for rubber dams. The book provides a holistic lifecycle assessment of rubber dams to give additional insight to readers looking to deploy rubber dam technology.

Please Note: This is an On Demand product, delivery may take up to 11 working days after payment has been received.

Table of Contents

1. Rubber Dam An Introduction 2. Water Conservation Technologies 3. Raw Materials Rubber Dam 4. Manufacturing Process Reinforced Rubber Sheet for Rubber Dam 5. Bonding and Anchoring System for Rubber Dam 6. Inflation and Deflation of Rubber Dam 7. Life Cycle Assessment of Rubber Dam


Sabu Thomas Vice Chancellor, Mahatma Gandhi University, and Director of the School of Energy Materials, Mahatma Gandhi University, Kottayam, Kerala, India. Prof. Sabu Thomas, an outstanding Alumnus of IIT, Kharagpur, is one of India's most renowned scientists in the area of Polymers. After completing his Ph.D. from IIT Kharagpur (1984-1987), he joined MG University as a Lecturer in 1997 and later became its Vice Chancellor. He has taken up a large number of visiting assignments abroad. Under his leadership, the University has been ranked 713th by TIMES, 30th in NIRF and the best University inKerala. He has supervised 120 Ph.D. students, authored 1,300 publications and edited 150 books earning him a H-index of 112 and 60,000 citations. He has received Honoris Causa degrees from Russia and France and obtained grants amounting to Rs. 30 crores for research funding from India and abroad. He has been ranked 114th in the list of the world's best scientists and 2nd in India by the Stanford University Ranking in Polymers. He was elected as a Fellow of the European Academy of Sciences. Considering his excellent contributions in teaching, research and administration, Prof. Thomas is the best candidate for the outstanding Alumnus award of IIT KGP. Ajay Vasudeo Rane Doctoral Research Fellow, Durban University of Technology, South Africa. Ajay Vasudeo Rane (Dr.) is currently a Post-Doctoral Research Fellow in the Department of Mechanical Engineering at Durban University of Technology. His areas of research include structural, mechanical, and morphological properties of materials (specially polymer composite materials). Dr. Ajay Vasudeo Rane is a member of the Royal Society of South Africa, the South African Institution of Mechanical Engineering, affiliate member of the South African Institution of Chemical Engineers and, a member of the Korean Society of Mechanical Engineers. He has edited five books and has contributed book chapters and technical manuscripts in peer reviewed journals and presented research works at national and international conferences. Abitha VK Senior Research Fellow, School of Chemical Sciences, Mahatma Gandhi University, India. Abitha V.K. is a Senior Research Fellow at the School of Chemical Sciences, Mahatma Gandhi University, India. Her areas of research include rubber, polymer blends, fibre filled polymer composites, particulate filled polymer composites and their morphological and structural characterization. Dr. Abitha has written several book chapters, and has co-edited three books with Elsevier. Krishnan Kanny Professor of Material Science and Engineering, Durban University of Technology, South Africa. Krishnan Kanny (Dr./Prof.) is currently Director and Full Professor in the Department of Mechanical Engineering at Durban University of Technology, South Africa. He is also the Director of the Composites Research Group. Professor Kanny holds a PhD in Materials Science and Engineering from Tuskegee University, Alabama, USA. Prof Kanny is a registered Professional Technologist (Pr. Tech. Eng) with The Engineering Council of South Africa and holds professional memberships with: the Engineering Council of South Africa (ECSA), the South African Institute of Mechanical Engineers (SaiMech.E), the American Society of Mechanical Engineers (ASME), the American Institute of Aeronautics and Astronomics (AIAA) and is an NRF rated scientist category C1. Krishnan Kanny is a professional engineer and scientist with over thirty years' experience in management, leadership, and human resources development. Additionally, he has over twenty-five years of research experience in manufacturing, robotics, and advanced engineering materials as well as extensive experience in mechanical engineering product, process and system design including development, implementation, and commissioning. Krishnan Kanny's professional interests include designing, processing, and testing of composite materials systems, reinforced thermosets/ thermoplastics, and nano-infused structures for aerospace, naval and automotive applications. He also has extensive experience on failure analyses including computational and analytical modeling and characterization & Morphological analysis including Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Xray Photoelectron Spectroscopy (XPS). Aastha Dutta Assistant Professor, Maharashtra Institute of Technology, Aurangabad. Aastha Dutta (M.E Chemical) is working as an Assistant Professor in Maharashtra Institute of Technology, Aurangabad. She pursued ME (Chemical Engineering) from Jawahar Lal Nehru Engineering College, Aurangabad. She has teaching experience of 14 years and has been teaching subjects like Material Science, Organic Chemistry, Physical Chemistry of Polymer, Biopolymers, Polymer Recycling and Waste Management, Polymer Reaction Engineering.