This book presents the proceedings of the 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation which was hosted by the South African Nuclear Energy Corporation (Necsa) SOC Limited in cooperation with the International Atomic Energy Agency (IAEA).
This book presents the proceedings of the 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation which was hosted by the South African Nuclear Energy Corporation (Necsa) SOC Limited in cooperation with the International Atomic Energy Agency (IAEA). The conference topics included deformation & modeling, processing & welding, techniques & instruments, mechanical methods vs. diffraction, microstructure & characterization, surface modification & coatings, 3D/4D characterization and fatigue, creep & plasticity.
This book presents the proceedings of the 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation which was hosted by the South African Nuclear Energy Corporation (Necsa) SOC Limited in cooperation with the International Atomic Energy Agency (IAEA). The conference topics included deformation & modeling, processing & welding, techniques & instruments, mechanical methods vs. diffraction, microstructure & characterization, surface modification & coatings, 3D/4D characterization and fatigue, creep & plasticity.
Table of Contents
Diffraction Methods and Scale Transition Model used to study Evolution of Intergranular Stress and Micro-Damage Phenomenon during Elasto-Plastic DeformationA. Baczmański, S. Wroński, E. Gadalińska, Y. Zhao, L. Le Joncour, C. Braham, C. Scheffzük, P. Kot
Examination of Deformation Mechanisms of Magnesium AZ31: in situ X-Ray Diffraction and Self-Consistent Modelling
M. Wronski, K. Wierzbanowski, A. Baczmanski, S. Wronski, M. Wojtaszek, R. Wawszczak, M. Muzyka
In situ Synchrotron X-Ray Measurement of Strain Fields near Fatigue Cracks grown in Hydrogen
M. Connolly, P. Bradley, A. Slifka, D. Lauria, E. Drexler
Stress Evaluation of Adhesively Bonded Lap Joints with Aluminum 2024-T3 Adherents Using FEA
M. Khodja, A. Ahmed, F. Hamida, G. Corderley, S. Govender
Investigating Stresses Developed during Mechanical Forming of Steel through Finite Element Analysis
S.A. Akinlabi, O.S. Fatoba, E.T. Akinlabi
Dislocation Density of Oxygen Free Copper with Compressive Strain Applied at High Temperature
M. Sano, S. Takahashi, A. Watanabe, A. Shiro, T. Shobu
Evaluation of Residual Stresses Introduced by Laser Shock Peening in Steel using Different Measurement Techniques
D. Glaser, M. Newby, C. Polese, L. Berthe, A.M. Venter, D. Marais, J.P. Nobre, G. Styger, S. Paddea, S.N. van Staden
Diffraction Line-Broadening Analysis of Al2O3/Y-TZP Ceramic Composites by Neutron Diffraction Measurement
K. Fan, J. Ruiz-Hervias, C. Baudin, J. Gurauskis
Influence of Laser Power and Traverse Speed on Weld Characteristics of Laser Beam Welded Ti-6Al-4V Sheet
P.M. Mashinini, D.G. Hattingh
Microstresses in Thermally Stable Diamond Composites made by High Pressure Infiltration Technique
V. Luzin, G. Voronin, M. Avdeev, J. Boland
Investigating the Residual Stress Distribution in Selective Laser Melting Produced Ti-6Al-4V using Neutron Diffraction
L.S. Anderson, A.M. Venter, B. Vrancken, D. Marais, J. van Humbeeck, T.H. Becker
Residual Stress Determination of Ductile Cast Iron by means of Neutron Diffraction
F. Smith, J. Markgraaff, D.Marais, A.M. Venter
Effect of Residual Stress Relaxation due to Sample Extraction on the Detectability of Hot Crack Networks in LTT Welds by means of µCT
F. Vollert, J. Dixneit, J. Gibmeier
Fast Temporal and Spatial Resolved Stress Analysis at Laser Surface Line Hardening of Steel AISI 4140
D. Kiefer, J. Gibmeier, F. Beckmann
Synchrotron XRD Evaluation of Residual Stresses Introduced by Laser Shock Peening for Steam Turbine Blade Applications
M. Newby, A. Steuwer, D. Glaser, C. Polese, D.G. Hattingh, C. Gorny
Neutron Diffraction Investigation of Residual Stresses in Nickel Based Austenitic Weldments on Creep Resistant Cr-Mo-V Material
P. Doubell, M. Newby, D. Hattingh, A. Steuwer, M.N. James
Neutron Through-Thickness Stress Measurements in Two-Phase Coatings with High Spatial Resolution
V. Luzin, D. Fraser
Measurement of Residual Stresses in Different Thicknesses of Laser Shock Peened Aluminium Alloy Samples
S.N van Staden, C. Polese, D. Glaser, J.-P. Nobre, A.M. Venter, D. Marais, J. Okasinski, J.-S. Park
Depth-Resolved Strain Investigation of Plasma Sprayed Hydroxyapatite Coatings Exposed to Simulated Body Fluid
T. Ntsoane, C. Theron, M. Topic, M. Härting, R. Heimann
Stress Profiling in Cold-Spray Coatings by Different Experimental Techniques: Neutron Diffraction, X-Ray Diffraction and Slitting Method
V. Luzin, K. Spencer, M.R. Hill, T. Wei, M. Law, T. Gnäupel-Herold
Performance Effects of Laser Deposited Ti-Al-Sn Coating on ASTM A29 Steel
O.S. Fatoba, S.A. Akinlabi, E.T. Akinlabi
Alignment and Calibration Procedures of the Necsa Neutron Strain Scanner
D. Marais, A.M. Venter, V. Luzin
Neutron Transmission Strain Measurements on IMAT: Residual Strain Mapping in an AlSiCp Metal Matrix Composite
R.S. Ramadhan, W. Kockelmann, A.S. Tremsin, M.E. Fitzpatrick
Deformation Analysis of Reinforced Concrete using Neutron Imaging Technique
T. Koyama, K. Ueno, M. Sekine, Y. Matsumoto, T. Kai, T. Shinohara, H. Iikura, H. Suzuki, M. Kanematsu
Influence of Hydrogenation on Residual Stresses in Oxygen-Implanted Ti-6Al-4V Alloy
S. Nsengiyumva, T.P. Ntsoane, M. Topic, L. Pichon
