Global Paints and Coatings Market Trends and Insights
Surge in Global Residential Construction Activity
Residential construction supports coating demand through both new project starts and the workload progressing toward delivery. Australia recorded 52,201 dwelling commencements in the June quarter of 2026, up 14.4% from the June quarter of 2025 on a seasonally adjusted basis. Seasonally adjusted completions in Australia's new private sector other residential category reached 19,018 in the June 2026 quarter, up 58.6% from the June 2025 quarter. For architectural-paint suppliers, the distinction matters because starts establish a future finishing pipeline while completions reflect projects further through construction.Expanding Automotive Production Volumes
Higher vehicle output creates an additional production-linked route to demand for automotive finishes. Global vehicle production rose from 92.7 million units in 2024 to 96.4 million in 2025, an increase of 3.9%. In July 2026, General Motors announced a USD 157 million investment in paint and modernization work at Wentzville Assembly, including processing equipment and an estimated 28,000-square-foot paint-shop expansion. General Motors' announcement commits capital to the in-house process stage where automotive coatings are applied. The 3.9% rise in global output carries the demand case for automotive finishes, while the Wentzville project shows an assembler's paint-shop capital spending rather than a measured increase in vehicle volume.Stringent Global VOC Regulations
For architectural-coating suppliers in Canada, VOC compliance limits which formulations can enter ordinary commercial channels. The regulations bar making, importing, or selling scheduled coatings above category-specific VOC limits, with prescribed dilution and permit exceptions. Qualifying dilution must follow written instructions that bring the coating within its limit, and labeling and bilingual-instruction conditions also apply. Specified coating uses and certain small-container products are excluded, making the applicable product category central to the compliance decision. A supplier must therefore resolve formulation, labeling and any applicable dilution or permit requirements before selling a covered coating in Canada, adding development and paperwork time ahead of a sale.Other drivers and restraints analyzed in the report include:
- Rapid Urban Population Growth in APAC
- Government Incentives for Green Building (Low-VOC)
- Volatility in Titanium-Dioxide Feedstock Prices
Segment Analysis
Acrylic accounted for a 35.88% share of the paints and coatings market size in 2026 and is forecast to be the fastest-growing segment at a CAGR of 4.16% between 2027 and 2032. In May 2026, BASF and Cromology announced that Cromology would source BASF's Acronal Ccycled acrylic binder for Tollens Maxiline+ interior wall paint, described as available in France from March 2026. Chemically recycled feedstock is attributed to selected products through a mass-balance approach. For manufacturers in the largest segment, this offers a route to differentiating the binder input within an established resin family.Regional ingredient capacity creates a different commercial consideration for acrylic formulators serving African customers. BASF's Durban site supplies acrylic dispersions for paint formulation. In March 2026, BASF expanded the site's broader dispersion production capacity to supply architectural coatings, construction materials, and paper customers. For acrylic formulators in Africa, the Durban expansion adds capacity at a nearby dispersion source for architectural coatings, a supply option separate from selecting a binder for a given paint.
Complete Report Scope:
- By Resin
- Acrylic
- Alkyd
- Polyurethane
- Epoxy
- Polyester
- Other Resin Types
- By Technology
- Water-borne
- Solvent-borne
- Powder Coating
- UV-cured Coating
- By End-user Industry
- Architectural
- Automotive
- Wood
- Protective Coating
- General Industrial
- Transportation
- Packaging
- By Geography
- Asia-Pacific
- China (Including Taiwan)
- India
- Japan
- Indonesia
- Australia and New Zealand
- South Korea
- Thailand
- Malaysia
- Philippines
- Bangladesh
- Vietnam
- Singapore
- Sri Lanka
- Rest of Asia-Pacific
- North America
- United States
- Canada
- Mexico
- Europe
- Germany
- United Kingdom
- France
- Italy
- Benelux
- Russia
- Turkey
- Switzerland
- Scandinavian Countries
- Poland
- Portugal
- Spain
- Rest of Europe
- South America
- Brazil
- Argentina
- Colombia
- Chile
- Rest of South America
- Middle-East
- Saudi Arabia
- Qatar
- United Arab Emirates
- Kuwait
- Egypt
- Rest of Middle East
- Africa
- South Africa
- Nigeria
- Algeria
- Morocco
- Rest of Africa
- Asia-Pacific
Geography Analysis
Asia-Pacific accounted for a 46.79% share of the paints and coatings market size in 2026 and is forecast to be the fastest-growing region at a CAGR of 5.13% between 2027 and 2032. The China National Coatings Industry Association reported that China's coatings industry produced 34.6 million metric tons in 2025, down 7.1% from 2024. By contrast, PPG commissioned a water-borne automotive coatings plant in Samut Prakan, Thailand, on March 20, 2025, with annual capacity of 2,000 metric tons for basecoats and primers serving growing Southeast Asian demand. Local basecoat and primer capacity gives Southeast Asian automotive buyers an additional supply route within the region.North America and Europe show why a global supplier's volume trajectory cannot be applied uniformly across regions. PPG reported higher sales volume in the United States and Canada in 2025, while its European sales volume decreased. South America offers a different pattern in Brazil, where 2025 paint sales rose 0.4% in real estate paints and at least 3% in the other segments compared with 2024. Brazil's slower real estate-paint expansion means a supplier focused on that application would face a different sales-growth environment from a more diversified domestic paint business.
Middle Eastern production investment and African export expansion illustrate 2 different ways to reach additional coating buyers. Makkah Paint Company launched an architectural coatings production line in Saudi Arabia in December 2025 for interior and exterior finishes serving residential, commercial, and project-based applications. Kansai Paint Co. Ltd reported in the first half of FY2025 that exports to Ghana and Angola had commenced. The Saudi example links local production to several building applications, while the African example shows a supplier extending its reach through distinct national export destinations.
List of Companies Covered in this Report:
- Akzo Nobel N.V.
- Asian Paints
- Axalta Coating Systems Ltd.
- Surventis
- Beckers Group
- Benjamin Moore & Co.
- Berger Paints India
- Chugoku Marine Paints, Ltd.
- DAW SE
- Hempel A/S
- Jazeera Paints
- Jotun
- Kansai Paint Co. Ltd
- Masco Corporation
- NATIONAL PAINTS FACTORIES CO. LTD.
- Nippon Paint Holdings Co., Ltd.
- NOROO Paint & Coatings Co., Ltd.
- PPG Industries, Inc.
- RPM International Inc.
- Russian Paints Company
- SK Kaken Co. Ltd
- The Sherwin-Williams Company
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- Akzo Nobel N.V.
- Asian Paints
- Axalta Coating Systems Ltd.
- Surventis
- Beckers Group
- Benjamin Moore & Co.
- Berger Paints India
- Chugoku Marine Paints, Ltd.
- DAW SE
- Hempel A/S
- Jazeera Paints
- Jotun
- Kansai Paint Co. Ltd
- Masco Corporation
- NATIONAL PAINTS FACTORIES CO. LTD.
- Nippon Paint Holdings Co., Ltd.
- NOROO Paint & Coatings Co., Ltd.
- PPG Industries, Inc.
- RPM International Inc.
- Russian Paints Company
- SK Kaken Co. Ltd
- The Sherwin-Williams Company

