+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

C-Arms - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts 2019 - 2029

  • PDF Icon

    Report

  • 126 Pages
  • February 2024
  • Region: Global
  • Mordor Intelligence
  • ID: 4764008
The C-Arms Market size is estimated at USD 2.39 billion in 2024, and is expected to reach USD 3.06 billion by 2029, growing at a CAGR of 5.11% during the forecast period (2024-2029).

The COVID-19 pandemic is expected to have an impact on the C-arms market. C-arms are used in image-guided procedures that are mostly elective, which were postponed due to COVID-19. This postponement also resulted in hospitals deterring investments in high-cost capital equipment during the pandemic, as they focused more on ventilators or other COVID-19 treatment supporting equipment. According to a study published in the British Journal of Surgery, in May 2020, based on a 12-week period of peak disruption in the hospital services due to COVID-19, around 28.4 million elective surgeries worldwide were canceled or postponed in 2020. More than 580,000 planned surgeries in India were canceled or delayed due to the COVID-19 pandemic. However, according to the European Association of Urology guideline, while handling COVID-19 positive patients needing surgery, a specially equipped operating room needs to be designed, where a mobile C-arm fluoroscopic X-ray system for radiology and healthcare professionals will be needed for operating. Hence, considering the rising cases of COVID-19 and their significant effect on healthcare systems across the region, the market is projected to continue the steady growth rate trajectory during the forecast period.

The major factors driving the market's growth include the rising geriatric population, increasing incidence of chronic diseases, advancements in maneuverability and imaging capabilities, and increasing demand for imaging technologies from emerging economies.

Imaging systems are becoming an essential technology found in nearly all well-equipped hospitals. Specialists in surgery, orthopedics, traumatology, vascular surgery, and cardiology use C-arms for intraoperative imaging. The devices provide high-resolution X-ray images in real-time, which help physicians monitor progress at any point during the operation and immediately make necessary corrections. As a result, treatment results are better, with faster recovery. C-arms are currently being used in several areas of medicine, and their applications are expected to increase over time. These factors, along with the increasing demand for healthcare infrastructure in developing countries, are driving the C-arms market. The emerging market economies include India, Mexico, Russia, Pakistan, Saudi Arabia, China, and Brazil. Critically, an emerging market economy is transitioning from a low income, less developed, often pre-industrial economy toward a modern, industrial economy with a higher standard of living. The primary reason for the rising demand for C-arms is rising healthcare expenditure, continuous advancement in the products, and increasing surgical procedures.

The burden of cancer is continuously increasing in India. According to the World Health Organization, in 2020, about 1,324,413 new cancer cases were reported in India. Similarly, according to the GLOBOCAN, in 2020, around 27,885 new cancer cases were reported in Saudi Arabia, with about 13,069 cancer-related deaths. Companies are constantly expanding and introducing new products in these emerging countries. For instance, in January 2020, Trivitron Healthcare, an India-based company, launched Elite - Flat Panel Digital C-arm with motorized movements. The rising number of hospitals and clinics and advancing healthcare infrastructure in these countries are leading to the growing adoption of technologically advanced C-arm systems, such as digital C-arms. However, the high cost of C-arm systems and the growing use of refurbished devices may restrain the market studied.

C-Arms Market Trends

Mini C-arm Segment is Expected to Show Better Growth During the Forecast Period

Mini C-arms are designed explicitly for extremity imaging. They have a smaller footprint and increased mobility compared to full-size C-arms. The mini C-arm category varies significantly in size and cost depending upon the functionalities offered. Manufacturers are differentiating their products based on mobility, the field of view, and alternate imaging technologies. The factors driving the growth of the segment include increasing usage of mini C-arms due to their portability, increasing product developments, and rising product approvals are among the major factors elevating the market growth.

The mini C-arms segment is expected to witness several product launches during the forecast period, as companies are upgrading their product offerings at a fast pace. For instance, in November 2021, Fujifilm launched the new Persona CS mobile fluoroscopy system, the compact mobile C-arm imaging solution designed for rapid and seamless positioning in the operating room

Moreover, in June 2021, Turner Imaging Systems, a developer of advanced X-ray imaging systems, stated that the company received its CE Mark for its Smart-C Mini C-Arm portable fluoroscopy X-ray imaging device. This will allow the Smart-C portable mini c-arm, to be distributed throughout the EU countries as well as the UK. Thereby, such product approvals is going to elevate the growth of the segment.

Additionally, in April 2021, Ziehm Imaging and Carestream Health stated that they have added a new mobile C-arm into its growing innovative product portfolio, known as the Ziehm Vision RFD C-arm, this surgical imaging system will further enhance Carestream's mobile and fluoroscopic product offerings to benefit even more healthcare providers. Thereby, such product developments are increasing the segment growth, hence elevating the market growth.

Therefore, the mini C-arms segment is expected to witness significant growth over the forecast period due to the abovementioned factors



North America Held the Healthy Share in the Market Studied

North America is expected to hold a significant growth in the market owing to factors such as high standards of healthcare infrastructure in the United States, along with the high frequency of diagnostic examinations, the rising geriatric population, and the increasing prevalence of chronic diseases in the country are among the key factors which contribute to the growth of the studied market in North America.

Moreover, according to the World Health Organization, in 2021, cardiovascular diseases are a leading cause of death globally. Hence, there is a higher requirement for treating CVD patients by conducting various imaging procedures in order to carry out surgeries so that they can overcome the disease. Hence this is leading to market growth.

Additionally, as per the Census Bureau estimates, the geriatric population (65 years or older) in the United States is expected to reach 94 million by 2060. The increasing geriatric population is expected to increase the number of surgeries, thus boosting the overall market.

The increasing trend of new product approvals and launches, along with the development of advanced technologies, plays a vital role in the growth of the C-arms market in the region. For instance, In December 2022, MINICARM.COM a medical device company expanded its United States warehouse with its high quality Mini C-Arm refurbishment center. The mini C-Arms are used for fluoroscopic imaging of the extremities in orthopedic surgery and digital diagnostic imaging.

Therefore, owing to the aforesaid factors the growth of the studied market is anticipated in the North America region.



C-Arms Industry Overview

The C-arms market is consolidated in nature due to the presence of several companies operating globally as well as regionally. The competitive landscape includes an analysis of a few international as well as local companies which hold market shares and are well known. include GE Company (GE Healthcare), Siemens Healthineers, Canon Medical Systems Corporation, Ziehm Imaging GmbH, and Fujifilm Holdings Corporation, among others.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support


This product will be delivered within 2 business days.

Table of Contents

1 INTRODUCTION
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 RESEARCH METHODOLOGY3 EXECUTIVE SUMMARY
4 MARKET DYNAMICS
4.1 Market Overview
4.2 Market Drivers
4.2.1 Rising Geriatric Population and Increasing Incidence of Chronic Diseases
4.2.2 Advancements in Maneuverability and Imaging Capabilities
4.2.3 Rising Demand in Emerging Economies for Imaging Technologies
4.3 Market Restraints
4.3.1 High Procedural and Equipment Costs
4.3.2 Growing Use of Refurbished Devices
4.4 Porter's Five Forces Analysis
4.4.1 Threat of New Entrants
4.4.2 Bargaining Power of Buyers/Consumers
4.4.3 Bargaining Power of Suppliers
4.4.4 Threat of Substitute Products
4.4.5 Intensity of Competitive Rivalry
5 MARKET SEGMENTATION (Market Size by Value - USD million)
5.1 By Type
5.1.1 Fixed C-arms
5.1.2 Mobile C-arms
5.1.2.1 Full-size C-arms
5.1.2.2 Mini C-arms
5.2 By Application
5.2.1 Cardiology
5.2.2 Gastroenterology
5.2.3 Neurology
5.2.4 Orthopedics and Trauma
5.2.5 Oncology
5.2.6 Other Applications
5.3 Geography
5.3.1 North America
5.3.1.1 United States
5.3.1.2 Canada
5.3.1.3 Mexico
5.3.2 Europe
5.3.2.1 Germany
5.3.2.2 United Kingdom
5.3.2.3 France
5.3.2.4 Italy
5.3.2.5 Spain
5.3.2.6 Rest of Europe
5.3.3 Asia-Pacific
5.3.3.1 China
5.3.3.2 Japan
5.3.3.3 India
5.3.3.4 Australia
5.3.3.5 South Korea
5.3.3.6 Rest of Asia-Pacific
5.3.4 Middle East and Africa
5.3.4.1 GCC
5.3.4.2 South Africa
5.3.4.3 Rest of Middle East and Africa
5.3.5 South America
5.3.5.1 Brazil
5.3.5.2 Argentina
5.3.5.3 Rest of South America
6 COMPETITIVE LANDSCAPE
6.1 Company Profiles
6.1.1 Canon Medical Systems Corporation
6.1.2 GE Healthcare
6.1.3 Hologic Corporation
6.1.4 Koninklijke Philips NV
6.1.5 FUJIFILM Holdings Corporation
6.1.6 Shimadzu Corporation
6.1.7 Siemens Healthineers
6.1.8 Ziehm Imaging GmbH
6.1.9 AADCO Medical Inc.
6.1.10 Allengers Medical System Ltd
6.1.11 BPL Medical Technologies
6.1.12 SternMed GmbH
7 MARKET OPPORTUNITIES AND FUTURE TRENDS

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • Canon Medical Systems Corporation
  • GE Healthcare
  • Hologic Corporation
  • Koninklijke Philips NV
  • FUJIFILM Holdings Corporation
  • Shimadzu Corporation
  • Siemens Healthineers
  • Ziehm Imaging GmbH
  • AADCO Medical Inc.
  • Allengers Medical System Ltd
  • BPL Medical Technologies
  • SternMed GmbH

Methodology

Loading
LOADING...