+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

PRINTER FRIENDLY

Advances in Construction and Demolition Waste Recycling. Woodhead Publishing Series in Civil and Structural Engineering

  • ID: 4806665
  • Book
  • 750 Pages
  • Elsevier Science and Technology
1 of 3

Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste.

This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste.

  • Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts
  • Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants
  • Reviews key steps in handling construction and demolition waste
Note: Product cover images may vary from those shown
2 of 3

1. Introduction to the recycling of construction and demolition waste

PART I MANAGING CONSTRUCTION AND DEMOLITION WASTE 2. Estimation of construction and demolition waste 3. An economic analysis of the processing technologies in CDW recycling platforms 4. Management of demolition waste 5. Management of end-of-life gypsum in a circular economy 6. The Effects of Data Collection method and monitoring of workers' behavior on the generation of demolition waste Koutamanis 7. Building information modeling for construction and demolition waste minimizatio 8. Identifying areas under potential risk of illegal construction and demolition waste dumping using GIS tools.

PART II PROCESSING, AND APPLICATIONS OF RECYCLED AGGREGATES FROM CONSTRUCTION AND DEMOLITION WASTE 9. Influence of the pretreatment of recycled aggregates 10. Recycled aggregates (RAs) for roads 11. Recycled aggregates (RAs) for asphalt materials 12. Self-compacting concrete with recycled aggregates 13. The suitability of concrete using recycled aggregates (RAs) for high-performance concrete 14. Influence of curing conditions on recycled aggregate concrete 15. Long term performance of recycled aggregate concrete (adiado) 16. Performance of concrete based on recycled brick aggregate 17. Recycled Household Ceramic Waste in Eco-efficient Cement: A case study 18. Self-healing concrete with recycled aggregates 19. Use of construction and demolition waste (CDW) for alkali-activated or geopolymer concrete

PART III ENVIRONMENTAL ISSUES AFFECTING RECYCLED AGGREGATES FROM CONSTRUCTION AND DEMOLITION WASTE 20. Detection of asbestos in CDW 21. Leaching performance of recycled aggregates 22. Life cycle assessment of non-hazardous Construction and Demolition Waste 23. Radioactivity of construction and demolition waste 24. A environmental assessment model of construction waste reduction management 25. LCA of masonry blocks with recycled aggregates 26. Use of LCA and LCC for decision between downcycling versus recycling of construction and demolition waste

Note: Product cover images may vary from those shown
3 of 3

Loading
LOADING...

4 of 3
Pacheco-Torgal, Fernando
F.Pacheco Torgal is a Principal Investigator at C-TAC Research Centre, University of Minho. He holds the Counsellor title of the Portuguese Engineers Association. Authored almost 350 publications some that were cited by Highly Cited authors (SCI h-index>60) and in high impact factor journals like Nature Reviews Mat. (IF=52), Nature Energy (IF=47), Progress in Mater. Science (I.F=24), Physics Reports (IF=20) and Nature Climate Change (I.F=19). Citations received in ISI WoS journals-2819 (h-index=29), citations received in Scopus journals- 3580 (h-index=31). Citations prediction for the year 2029 (around 5.500 citations on WoS, 7.500 on Scopus (already has 7000 MR, h=45) and 16.000 citations on scholar google). Member of the editorial board of 9 international journals, 4 referenced on the Web of Science and three referenced on Scopus. Grant assessor for several scientific institutions in 14 countries, UK, US, Netherlands, China, France, Australia, Croatia, Kazakhstan, Belgium, Spain, Czech Republic, Saudi Arabia, UA.Emirates, Poland and also the EU Commission. Invited reviewer for 133 international journals for which he reviewed so far almost 900 papers. Lead Editor of 19 international books (9 being on the Master Book List of Web of Science).
Ding, Yining
Yining Ding is Professor in the Institute of Structural Engineering at Dalian University of Technology, China. He has published over 100 papers in three languages.
Colangelo, Francesco
Francesco Colangelo is an Associate Professor of "Innovative Materials for Civil Engineering” and "Materials Engineering” at the Faculty of Engineering, University of Naples Parthenope, Italy
Tuladhar, Rabin
Rabin Tuladhar is an Associate Professor and Associate Dean Learning and Teaching (ADLT) at the College of Science and Engineering, James Cook University, Australia.
Koutamanis, Alexander
Alexander Koutamanis is an Associate Professor at Delft University of Technology. He is also an executive board member of the LDE Centre
for BOLD Cities.
Note: Product cover images may vary from those shown
Adroll
adroll