+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

PRINTER FRIENDLY

Gaskets and Seals Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2019-2024

  • ID: 4856293
  • Report
  • October 2019
  • Region: Global
  • 106 pages
  • IMARC Group
1 of 3

FEATURED COMPANIES

  • AB SKF
  • BRUSS Sealing Systems
  • Cooper Standard Holding
  • Daetwyler Holding
  • Dana Incorporated
  • ElringKlinger
  • MORE
The global gaskets and seals market reached a value of US$ 67.7 Billion in 2018. Gaskets and seals are mechanical fixtures that are used to prevent leakage of fluid between two components and admission of debris in engines. Gaskets act as a static seal between two non-mobile flat flanges. They are manufactured using materials that can handle high rates of compression such as rubber, nitrite, graphite and neoprene. On the other hand, seals are placed to prevent leakages from two moving parts such as shafts, pumps and engine components. They are usually flat and round and manufactured with an inner rubber surface and an outer metal ring. They are primarily used to seal the hydraulic line to prevent leakage from the shaft end. Both gaskets and seals offer high flexibility, reliability, strength and resistance to extreme heat.

The thriving automotive industry, along with the increasing product utilization in the plumbing and construction sector, represent the key factors driving the market growth. Owing to rising industrialization and rapid urbanization across the globe, there is a significant increase in the number of manufacturing plants and factories that use gaskets and seals. The automotive industry extensively utilizes the products to avoid the leakage or spillage of fluids and gases. Furthermore, gaskets are used in engines to maintain pressure and prevent contaminated particles from permeating, whereas seals are used as shock absorbers. They can also sustain extreme pressures, compressive loads and temperature variations due to which they are used in various sealing machines and equipment in the manufacturing sector. Moreover, the growth of the e-commerce platform that provides direct and third-party operated distribution channels to the manufacturers is also contributing to the market growth. Looking forward, the publisher expects the market to reach a value of US$ 90.3 Billion by 2024, registering a CAGR of around 5% during 2019-2024.

Report Coverage:

Historical, Current and Future Market Trends

Market Breakup by Product:
Gaskets
Metallic Gasket
Rubber Gasket
Cork Gasket
Non-Asbestos Gasket
Spiral Wound Gasket
Others
Seals
Shaft Seals
Molded Seals
Motor Vehicle Body Seals
Others

Market Breakup by Material:
Fiber
Graphite
PTFE
Rubber
Silicones
Others

Market Breakup by Application:
Automotive
Industrial Machinery
Electrical and Electronics
Marine & Rail
Aerospace
Oil & Gas
Chemicals & Petrochemicals
Others

Market Breakup by End-Use:
OEM
Aftermarket

Market Breakup by Region:
Asia Pacific
North America
Europe
Middle East and Africa
Latin America

Competitive Landscape:

The report has also analyzed the competitive landscape of the market with some of the key players being AB SKF, Dana Incorporated, ElringKlinger, Flowserve, Trelleborg, Freudenberg Sealing Technologies, Federal-Mogul, Smiths Group, BRUSS Sealing Systems, Cooper Standard Holding, Garlock Sealing Technologies, Daetwyler Holding, etc.

Key Questions Answered in This Report:
  • How has the global gaskets and seals market performed so far and how will it perform in the coming years?
  • What are the key regional markets in the global gaskets and seals industry?
  • What is the breakup of the market based on the product?
  • What is the breakup of the market based on the material?
  • What is the breakup of the market based on the application?
  • What is the breakup of the market based on the end-use?
  • What are the various stages in the value chain of the global gaskets and seals industry?
  • What are the key driving factors and challenges in the global gaskets and seals industry?
  • What is the structure of the global gaskets and seals industry and who are the key players?
  • What is the degree of competition in the global gaskets and seals industry?
Note: Product cover images may vary from those shown
2 of 3

FEATURED COMPANIES

  • AB SKF
  • BRUSS Sealing Systems
  • Cooper Standard Holding
  • Daetwyler Holding
  • Dana Incorporated
  • ElringKlinger
  • MORE
1 Preface

2 Scope and Methodology
2.1 Objectives of the Study
2.2 Stakeholders
2.3 Data Sources
2.3.1 Primary Sources
2.3.2 Secondary Sources
2.4 Market Estimation
2.4.1 Bottom-Up Approach
2.4.2 Top-Down Approach
2.5 Forecasting Methodology

3 Executive Summary

4 Introduction
4.1 Overview
4.2 Key Industry Trends

5 Global Gaskets and Seals Market
5.1 Market Overview
5.2 Market Performance
5.3 Market Breakup by Product
5.4 Market Breakup by Material
5.5 Market Breakup by Application
5.6 Market Breakup by End-Use
5.7 Market Breakup by Region
5.8 Market Forecast

6 Market Breakup by Product
6.1 Gaskets
6.1.1 Market Trends
6.1.2 Market Breakup by Type
6.1.2.1 Metallic Gasket
6.1.2.2 Rubber Gasket
6.1.2.3 Cork Gasket
6.1.2.4 Non-Asbestos Gasket
6.1.2.5 Spiral Wound Gasket
6.1.2.6 Others
6.1.3 Market Forecast
6.2 Seals
6.2.1 Market Trends
6.2.2 Market Breakup by Type
6.2.2.1 Shaft Seals
6.2.2.2 Molded Seals
6.2.2.3 Motor Vehicle Body Seals
6.2.2.4 Others
6.2.3 Market Forecast

7 Market Breakup by Material
7.1 Fiber
7.1.1 Market Trends
7.1.2 Market Forecast
7.2 Graphite
7.2.1 Market Trends
7.2.2 Market Forecast
7.3 PTFE
7.3.1 Market Trends
7.3.2 Market Forecast
7.4 Rubber
7.4.1 Market Trends
7.4.2 Market Forecast
7.5 Silicones
7.5.1 Market Trends
7.5.2 Market Forecast
7.6 Others
7.6.1 Market Trends
7.6.2 Market Forecast

8 Market Breakup by Application
8.1 Automotive
8.1.1 Market Trends
8.1.2 Market Forecast
8.2 Industrial Machinery
8.2.1 Market Trends
8.2.2 Market Forecast
8.3 Electrical and Electronics
8.3.1 Market Trends
8.3.2 Market Forecast
8.4 Marine & Rail
8.4.1 Market Trends
8.4.2 Market Forecast
8.5 Aerospace
8.5.1 Market Trends
8.5.2 Market Forecast
8.6 Oil & Gas
8.6.1 Market Trends
8.6.2 Market Forecast
8.7 Chemicals & Petrochemicals
8.7.1 Market Trends
8.7.2 Market Forecast
8.8 Others
8.8.1 Market Trends
8.8.2 Market Forecast

9 Market Breakup by End-Use
9.1 OEM
9.1.1 Market Trends
9.1.2 Market Forecast
9.2 Aftermarket
9.2.1 Market Trends
9.2.2 Market Forecast

10 Market Breakup by Region
10.1 Asia Pacific
10.1.1 Market Trends
10.1.2 Market Forecast
10.2 Europe
10.2.1 Market Trends
10.2.2 Market Forecast
10.3 North America
10.3.1 Market Trends
10.3.2 Market Forecast
10.4 Middle East and Africa
10.4.1 Market Trends
10.4.2 Market Forecast
10.5 Latin America
10.5.1 Market Trends
10.5.2 Market Forecast

11 SWOT Analysis
11.1 Overview
11.2 Strengths
11.3 Weaknesses
11.4 Opportunities
11.5 Threats

12 Value Chain Analysis

13 Porter's Five Forces Analysis
13.1 Overview
13.2 Bargaining Power of Buyers
13.3 Bargaining Power of Suppliers
13.4 Degree of Competition
13.5 Threat of New Entrants
13.6 Threat of Substitutes

14 Competitive Landscape
14.1 Market Structure
14.2 Key Players
14.3 Profiles of Key Players
14.3.1 AB SKF
14.3.2 Dana Incorporated
14.3.3 ElringKlinger
14.3.4 Flowserve
14.3.5 Trelleborg
14.3.6 Freudenberg Sealing Technologies
14.3.7 Federal-Mogul
14.3.8 Smiths Group
14.3.9 BRUSS Sealing Systems
14.3.10 Cooper Standard Holding
14.3.11 Garlock Sealing Technologies
14.3.12 Daetwyler Holding
Note: Product cover images may vary from those shown
3 of 3

Loading
LOADING...

4 of 3
  • AB SKF
  • Dana Incorporated
  • ElringKlinger
  • Flowserve
  • Trelleborg
  • Freudenberg Sealing Technologies
  • Federal-Mogul
  • Smiths Group
  • BRUSS Sealing Systems
  • Cooper Standard Holding
  • Garlock Sealing Technologies
  • Daetwyler Holding
Note: Product cover images may vary from those shown
Adroll
adroll