Advances in Additive Manufacturing. Artificial Intelligence, Nature-Inspired, and Biomanufacturing. Additive Manufacturing Materials and Technologies

Table of Contents

I Introduction

1. Introduction to additive manufacturing technologies

Rasheedat Modupe Mahamood, Tien-Chien Jen, Stephen Akinlabi, Sunir Hassan and Esther Akinlabi

2. Trends in additive manufacturing: an exploratory study

Mohd Shoeb, Lokesh Kumar, Abid Haleem and Muhammad Javaid

3. Additive manufacturing in health 4.0 era: a systematic review

Vineet Jain, Puneeta Ajmera, Sheetal Kalra and Sheetal Yadav

4. Integration of Reverse Engineering with Additive Manufacturing

Ajay Kumar, Parveen Kumar, Hari Singh, Abid Haleem and Ravi Kant Mittal

II Additive Manufacturing Technologies

5. Recent and current additive manufacturing innovative technologies

Carmen M. Gonzalez Henriquez, Mauricio A. Sarabia-Vallejos, Juan Rodr?guez-Hern?ndez, Fernando Rodriguez Umanzor Sr. and Dan Perez Monje

6. Printing File Formats for Additive Manufacturing Technologies

Ajay Kumar, Parveen Kumar, Ravi Kant Mittal, Sarita Rathee and Hari Singh

7. Additive manufacturing techniques used for preparation of scaffolds in bone repair and regeneration

Sudip Dasgupta and Yogendra Pratap Singh

8. Cold spray technology: a perspective of nature-inspired feature elaboration and bio-manufacturing by a heatless additive method using nano-powders

Rija Nirina RAOELISON

9. Pre-processing and post processing in additive manufacturing

Ajay Kumar, Parveen Kumar, Sarita Rathee, Ravi Kant Mittal and Hari Singh

10. Computer vision based on-line monitoring technique part quality enhancement in selective laser melting process.

Brahmansh Kaushik and S. Anand Kumar

11. Fundamentals of thermo-fluid-mechanical modelling in additive manufacturing processes

Anshul Yadav

III Materials in AM

12. Materials processed by Additive Manufacturing techniques

Ajay Kumar, Parveen Kumar, Ravi Kant Mittal and Dipen Kumar Rajak

13. Ceramic-Metal Interface: In-situ Microstructural Characterization Aid Vacuum Brazing Additive Manufacturing Technology

S. Stalin and K. Kalaichelvan

14. Processing challenges in additively manufactured single crystal alloys: a process-structure-property relationship approach

Rajkumar Velu, S. Anand Kumar and Ruban Whenish

15. A Review of developments in sustained friction stir additive manufacturing for aluminum alloys

J. Srinivas and U Sudhakar

16. Processing of biomaterials by additive manufacturing (AM)

Mayurkumar A. Makhesana and Kaushik M. Patel

17. Additive manufacturing of functionally graded materials through selective laser melting: current research trends, global manufacturing scenario and future prospects

Ashish Kumar Mishra,, Arvind Kumar and Kuldeep Yadav

18. Non-destructive evaluation of additive manufactured parts

Sreeraj P. R and Santosh Mishra

IV Learnings from nature/inspirations from nature

19. Bio-inspired advancements in additive manufacturing

Ruban Whenish, S Arivazhagan, Rajkumar Velu and S. Anand Kumar

20. Path planning and simulation for prototyping bio-inspired complex shapes

Tadele Belay Tuli

21. Novel orthognathic surgery substitute with 3D bioprinted bone scaffolds

Sonam Sehrawat, Ajay Kumar and Mona Prabhakar

22. Multi-objective process parameter optimization in fused filament fabrication with nature-inspired algorithms

Nita Yodo and Arup Dey

23. Nature inspired 4D printing of shape memory polymers by fused filament fabrication: an experimental case study

Bijaya Bikram Samal, Anita Jena, Shailendra Kumar Varshney and Cheruvu Siva Kumar

V Applications

24. Selected biomedical applications of additive manufacturing techniques

Kishore Pradeep and Bidyut Pal

25. The state-of-the-art in additive manufacturing of Ti-6AL-4V alloys: recent progress and insights into the future developments

Natalia B. Ghisi, Nujood Saeed AlShehhi, Hend Ali Alqaydi and Nesma T. Aboulkhair

26. Material selection and processing challenges with additive manufacturing in biomimicry for biomedical applications

Deepak Gupta and Jayesh Bellare

27. Design and optimization of artificial intelligence robot arm printed by a metal-based additive manufacturing process

M Kumaran, V. Senthilkumar and T Sathies

28. Additive manufacturing of customized, accessible, and affordable lower limb prosthetics in india
a case study

Dheeraj Kumar Angajala, Ankit Sahai and Rahul Swarup Sharma

29. Current trends of application of additive manufacturing in oral health care

Amit Bhardwaj, Anurag Bhatnagar and Ajay Kumar

Authors

Ravi Kant Mittal Retired Senior Professor if BITS India. Former Director of the offshore campus of BITS Pilani at Dubai, UAE. He was also the Vice-Chancellor of a private university, K.R. Mangalam University, Gurugram, India. Prof. (Dr.) Ravi Kant Mittal began his academic career at Birla Institute of Technology and Science, Pilani (BITS Pilani), India, one of the top universities of India, in 1975 and retired from there as a senior professor in 2018. He headed the offshore campus of BITS Pilani at Dubai, UAE, as the director and was also the vice-chancellor of a private university, K.R. Mangalam University, Gurugram, India for a term. In his academic endeavors, he taught a wide spectrum of courses in Mechanical Engineering, Computer Science and allied subjects. He developed and introduced many new courses in emerging and interdisciplinary areas, at the graduate and postgraduate levels, including product design, mechanical design, reliability engineering, control systems, systems modelling, robotics & intelligent systems, mechatronics, MEMS and nanotechnology. He is a life member of IEEE and ACM. His total research and teaching experience, including top level administration, is 45 years. Prof. Mittal is author/co-author of over 80 technical research papers and has co-authored three popular textbooks and two edited research monographs. Abid Haleem Professor of Mechanical Engineering, Jamia Millia Islamia (A Central University by an Act of Parliament) in New Delhi, India. Dr. Abid Haleem, working as a professor of mechanical engineering at Jamia Millia Islamia, New Delhi, India, is acknowledged in the list of top global scientists (Elsevier & Stanford) in the top 2 % in 2019 and 2020 and has a global rank in the top 0.4 %. Presently, Dr. Abid Haleem is a regional editor, Global Journal of Flexible Systems Management (Springer) and an associate editor with JCOT (Elsevier), MAPAN (Springer), and Journal of Orthopaedics (Elsevier), Apollo Journal of medicine (Kluwer). Ajay Kumar Associate Professor Mechanical Engineering, Department JECRC University, Jaipur Engineering College and Research Centre (JECRC), India.

Dr. Ajay is an Associate Professor in the Mechanical Engineering Department at JECRC University, India. He received his Ph.D. in the field of advanced manufacturing from Guru Jambheshwar University of Science & Technology, India, after B.Tech. (Hons.) in mechanical engineering and M.Tech. (Distinction) in manufacturing and automation. His research spans incremental sheet forming, artificial intelligence, sustainable materials, additive manufacturing, mechatronics, smart manufacturing, industry 4.0, waste management, and optimization techniques. He has organized international conferences and holds more than 20 patents. With 15 years of teaching and research experience, Dr. Ajay is a Guest Editor for Frontiers in Sustainability and actively contributes to conferences and symposiums. Recognized with merit and best teacher awards, he advises the QCFI, Delhi Chapter student cell at JECRC University, and has played a key role in various academic and professional initiatives.