The Global Automotive Balance Shaft Market size is expected to reach $13.2 billion by 2027, rising at a market growth of 4.1% CAGR during the forecast period.
A balance shaft is a weighted shaft that is used to dampen vibrations in a vehicle's engine. A balance shaft system consists of two shafts that rotate in opposite directions at double the engine speed and have equal eccentric weights. The vertical second-order forces generated by the engine are canceled out by the centrifugal force produced by the shafts. Inline 4-cylinder engines frequently require balance shafts.
The market is expected to grow due to rising demand for inline 4-cylinder engines, increased acceptance of fuel-efficient vehicles with low carbon emissions, and increased demand for vehicle engines with decreased vibration, noise, and harshness. Additionally, a rise in demand for passenger automobiles from emerging nations, as well as technology improvements, are expected to provide potential possibilities.
To counterbalance and eliminate excessive engine vibration, balance shafts were created and installed. However, most engines function fine without their balance shaft belts, the additional vibration stresses other engine components such as bell housing, motor mounts, and even cooling line connections. A car may become unbalanced without balance shafts as the engine shifts around under high acceleration. Because balance shaft belts are frequently installed near timing belts, a broken balance shaft belt could quickly dislodge the timing belt. Many mechanics advise replacing both components at the same time, especially if the labor cost difference is small.
As the demand for noise, harshness, and vibration-free engines grows around the world, the market for automotive balancing shafts is expected to rise. Because of the significant increase in the vehicle industry, the demand for inline-4 cylinder engines is increasing. The need for environmentally friendly vehicles is increasing because of the government's rigorous emission rules. Aluminum balance shafts are increasingly being used by original equipment manufacturers (OEMs) due to their weight and strength advantages.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include American Axle & Manufacturing, Inc., Engine Power Components, Inc., Hirschvogel Group, Linamar Corporation, MAT Foundry Group Ltd., Musashi Seimitsu Industry Co., Ltd., Ningbo Jingda Hardware Manufacture Co., Ltd., Otics Corporation, Sansera Engineering Limited, and TFO Corporation.
A balance shaft is a weighted shaft that is used to dampen vibrations in a vehicle's engine. A balance shaft system consists of two shafts that rotate in opposite directions at double the engine speed and have equal eccentric weights. The vertical second-order forces generated by the engine are canceled out by the centrifugal force produced by the shafts. Inline 4-cylinder engines frequently require balance shafts.
The market is expected to grow due to rising demand for inline 4-cylinder engines, increased acceptance of fuel-efficient vehicles with low carbon emissions, and increased demand for vehicle engines with decreased vibration, noise, and harshness. Additionally, a rise in demand for passenger automobiles from emerging nations, as well as technology improvements, are expected to provide potential possibilities.
To counterbalance and eliminate excessive engine vibration, balance shafts were created and installed. However, most engines function fine without their balance shaft belts, the additional vibration stresses other engine components such as bell housing, motor mounts, and even cooling line connections. A car may become unbalanced without balance shafts as the engine shifts around under high acceleration. Because balance shaft belts are frequently installed near timing belts, a broken balance shaft belt could quickly dislodge the timing belt. Many mechanics advise replacing both components at the same time, especially if the labor cost difference is small.
As the demand for noise, harshness, and vibration-free engines grows around the world, the market for automotive balancing shafts is expected to rise. Because of the significant increase in the vehicle industry, the demand for inline-4 cylinder engines is increasing. The need for environmentally friendly vehicles is increasing because of the government's rigorous emission rules. Aluminum balance shafts are increasingly being used by original equipment manufacturers (OEMs) due to their weight and strength advantages.
COVID-19 Impact Analysis
The COVID-19 pandemic had an impact on new car sales, particularly in 2020. As a result, supply chain disruptions occurred, creating delays in car production. Several automobile balance shaft manufacturers had component and material shortages, causing vehicle production to be delayed. The relaxation of lockdown restrictions, on the other hand, is likely to result in a surge in vehicle demand, boosting the growth of the automotive balancing shaft market. During the COVID-19 epidemic, some countries took steps to resurrect the car sector in their respective regions. For example, the Chinese government released a circular in April 2020 outlining efforts to stabilize and boost automotive consumption, extending subsidies to automakers through 2022.Market Growth Factors:
High adoption of Low-Carbon-Emission Vehicles.
Automobiles with inline 4-cylinder engines are becoming increasingly widespread. Inline-4 cylinder engines are becoming more popular due to improved fuel economy and affordability. Second-order vibration cannot be reduced in inline 4-cylinder engines due to unequal movement of connecting rods during crankshaft rotation. To decrease vibrations, balance shafts are commonly used in inline 4-cylinder engines. As a result, the rise in demand for inline 4-cylinder engines is likely to boost demand for balancing shafts, propelling the market forward over the upcoming years. Original equipment manufacturers (OEMs), governments, suppliers, and other stakeholders are under pressure to provide viable solutions within a set time frame due to global emission laws, fluctuating fuel prices, and rising environmental consciousness.Demand for Vehicle Engines with Less Vibration, Noise, and Harshness is growing
Vibration, noise, and harshness in vehicles have a substantial impact on vehicle performance and driving pleasure. The constant investment by the manufacturers on the development of better and advanced automotive components in order to optimize efficiency of the vehicle is expected to accelerate the demand for automotive balance shaft in the market. Various vehicle balance shaft manufacturers offer creative methods to extend the characteristics of the balancer shaft to improve fuel economy, reduce pollutants, and reduce noise and vibrations. Along with that, consumers are increasingly investing in the automobiles that produce less noise and vibration for smooth driving experience.Marketing Restraining Factor:
High Prices of automobile
Automakers face several issues, including raising the overall vehicle cost due to more complex and enhanced automotive parts, seeking to maintain a balance between product and cost quality, and continual component size optimization. Because balance shafts help improve automobile functions and features, the number of sophisticated features and functions raises vehicle cost accordingly. Along with that, there are many automotive manufacturers who are investing in their innovative and advanced products and hence, the overall cost of the automotive increases, which is expected to restrict customers from adopting these vehicles and hence, hindering the growth of the automotive balance shaft market in the coming years.Manufacturing Process Outlook
Based on Manufacturing Process, the market is segmented into Forging, and Casting. The Forging segment acquired a substantial revenue share in the automotive balance shaft market in 2020. Forging is a metal-shaping process that uses concentrated compressive forces to shape metal. A hammer or a die is used to deliver the blows. The temperature at which forging is done is referred to as cold forging, warm forging, or hot forging. Forging is one of the widely adopted manufacturing process, which is expected to gain high momentum in the coming years.Application Outlook
Based on Application, the market is segmented into Passenger Cars, Light Commercial Vehicles, and Heavy Commercial Vehicles. The Light Commercial Vehicles segment witnessed a substantial revenue share in the automotive balance shaft market in 2020. The use of Automotive Balance Shafts in light commercial vehicles can be seen as a way to improve fuel economy and reduce emissions. Additionally, it can help with the smoothness and performance of the engine. Ultimately, this leads to a better driving experience for passengers and drivers alike. Automotive balance shafts improve fuel efficiency and power generation in light commercial vehicles (LCVs) due to low vibration levels when running at high revolution speeds.Sales Channel Outlook
Based on Sales Channel, the market is segmented into Original Equipment Manufacturer, and Aftermarket. The Original Equipment Manufacturer segment recorded the highest market share in forecast period. OEM refers to a corporation that purchases products and then re-brands or combines them into a new product under its name. Microsoft, for instance, provides its Windows software to Dell Technologies, which integrates it into its personal computers and offers a complete PC system to the general public.Engine Type Outlook
Based on Engine Type, the market is segmented into Inline 4-cylinder Engine, Inline 3-cylinder Engine, Inline 5-cylinder Engine, and V6 Engine. The 3-cylinder Engine segment procured a significant revenue share in the automotive balance shaft market in 2020. An Inline-Three Cylinder Engine is a three-cylinder internal combustion engine with the cylinders mounted in a straight line along the crankcase. The Inline-Three Cylinder Engine offers good fuel economy, smoothness, and low emissions. It also has a simple design that reduces the overall weight and size of the engine, as well as improves heat dissipation. It has a displacement of about 500 ccs and is most commonly found in motorcycles.Regional Outlook
Based on Regions, the market is segmented into North America, Europe, Asia Pacific, and Latin America, Middle East & Africa. Asia Pacific emerged as the leading region in the automotive balance shaft market with the largest revenue share in 2020. It is due to factors such as increased sales of new automobiles and increased adoption of fuel-efficient vehicles. The expansion of the industry is boosted by increased car manufacturing, particularly in emerging economies like India Singapore, Taiwan, and China. Furthermore, the adoption of strict government laws related to emissions, as well as an increase in environmental awareness, are projected to drive market expansion.The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include American Axle & Manufacturing, Inc., Engine Power Components, Inc., Hirschvogel Group, Linamar Corporation, MAT Foundry Group Ltd., Musashi Seimitsu Industry Co., Ltd., Ningbo Jingda Hardware Manufacture Co., Ltd., Otics Corporation, Sansera Engineering Limited, and TFO Corporation.
- Feb 2022: Linamar Corporation signed an agreement with SuperTurbo Technologies, a unique planetary traction drive. Through this partnership, the companies aimed to launch SuperTurbo, a transformational technology that enhances the ability of hydrogen, diesel, and natural gas interior ignition engines, while significantly decreasing dangerous emissions.
- May 2021: American Axle formed a partnership with REE Automotive, an electric platform leader reinventing e-mobility. This partnership aimed to combine AAM's system abilities and focus on NVH depletion to blend AAM's light and adapted next era electric consumed units, which feature completely combine rapid motors and inverter technology within REE's highly flexible and troublesome REEcornerTM technology that allows a complete-flat EV frame for various commercial vehicle applications.
- Feb 2018: Linamar Corporation completed the acquisition of MacDon, a Canadian manufacturer of specialty agricultural equipment. Through this acquisition, Linamar's aimed to expand its abilities and further diverse end market.
- Apr 2017: American Axle & Manufacturing Holdings took over Metaldyne Performance Group, a leading provider of highly-engineered components. This acquisition aimed to allow American Axle to maximize stakeholder value by generating an enterprise with a larger scale, size, and growing organization diversification that provides powerful, efficient, and innovative solutions for consumers.
Scope of the Study
Market Segments Covered in the Report:
By Manufacturing Process
- Forging
- Casting
By Application
- Passenger Cars
- Light Commercial Vehicles
- Heavy Commercial Vehicles
By Sales Channel
- Original Equipment Manufacturer
- Aftermarket
By Engine Type
- Inline 4-cylinder Engine
- Inline 3-cylinder Engine
- Inline 5-cylinder Engine
- V6 Engine
By Geography
- North America
- US
- Canada
- Mexico
- Rest of North America
- Europe
- Germany
- UK
- France
- Russia
- Spain
- Italy
- Rest of Europe
- Asia Pacific
- China
- Japan
- India
- South Korea
- Singapore
- Malaysia
- Rest of Asia Pacific
- LAMEA
- Brazil
- Argentina
- UAE
- Saudi Arabia
- South Africa
- Nigeria
- Rest of LAMEA
Key Market Players
List of Companies Profiled in the Report:
- American Axle & Manufacturing, Inc.
- Engine Power Components, Inc.
- Hirschvogel Group
- Linamar Corporation
- MAT Foundry Group Ltd.
- Musashi Seimitsu Industry Co., Ltd.
- Ningbo Jingda Hardware Manufacture Co., Ltd.
- Otics Corporation
- Sansera Engineering Limited
- TFO Corporation
Unique Offerings from the publisher
- Exhaustive coverage
- The highest number of market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 4. Global Automotive Balance Shaft Market by Manufacturing Process
Chapter 5. Global Automotive Balance Shaft Market by Application
Chapter 6. Global Automotive Balance Shaft Market by Sales Channel
Chapter 7. Global Automotive Balance Shaft Market by Engine Type
Chapter 8. Global Automotive Balance Shaft Market by Region
Chapter 9. Company Profiles
Companies Mentioned
- American Axle & Manufacturing, Inc.
- Engine Power Components, Inc.
- Hirschvogel Group
- Linamar Corporation
- MAT Foundry Group Ltd.
- Musashi Seimitsu Industry Co., Ltd.
- Ningbo Jingda Hardware Manufacture Co., Ltd.
- Otics Corporation
- Sansera Engineering Limited
- TFO Corporation
Methodology
LOADING...
Table Information
| Report Attribute | Details |
|---|---|
| No. of Pages | 235 |
| Published | March 2022 |
| Forecast Period | 2020 - 2027 |
| Estimated Market Value ( USD | $ 10157.3 Billion |
| Forecasted Market Value ( USD | $ 13177.09 Billion |
| Compound Annual Growth Rate | 3.8% |
| Regions Covered | Global |
| No. of Companies Mentioned | 10 |
