The Europe Bearing Market should witness market growth of 8.4% CAGR during the forecast period (2022-2028).
Mounted Bearings are mechanical assemblies comprised of bearings enclosed within bolt-on or threaded mounting components, such as pillow blocks, flanged units, and so on. They support rotating shafts and reduce friction between rotating shafts and static machine components. Mounted bearings are generally employed in machines with rotating shafts that are exposed. They are utilized as take-up devices at the ends of elevators as well as flanged units at intermediate locations. The bearings may be either rolling elements or journal bearings. Mounted bearings are designed for bolt-on installation and replacement convenience.
Slide bearings are mechanical assemblies intended to provide one-dimensional free motion between structural parts. Bridges and commercial and industrial structures rely heavily on slide bearings for structural stability. These components tolerate thermal movement, permit end-beam rotation, and insulate structural components from vibration, noise, and shock. There are also sliding bearings utilized on truss base plates, heat transfer, and process equipment.
Radial ball bearings are utilized primarily for shafts with radial loads and mild axial loads. In addition to their radial capabilities, angular contact ball bearings may accommodate greater axial loads in one direction. There is also ball thrust bearings that are meant solely for axial stresses. The most typical form for radial ball bearings is the single-row variant, which may be shielded or sealed depending on whether it will be used in a protected environment, such as a transmission, or in an exposed environment, such as a bicycle wheel.
The Digital Railway, a government-supported nationwide initiative, intends to greatly enhance train control, command, and signalling systems within a single generation. The rail industry plans to modernize Britain's rail infrastructure by selectively implementing cutting-edge train control and signalling systems. In the previous 30 years or so, train usage in Britain has about doubled. During peak hours, Britain's trains are jammed on congested networks in commuter areas, similar to the congested roads.
The Germany market dominated the Europe Bearing Market by Country in 2021; thereby, achieving a market value of $12.0 billion by 2028. The UK market is exhibiting a CAGR of 7.5% during (2022-2028). Additionally, The France market would experience a CAGR of 9.2% during (2022-2028).
Based on Product, the market is segmented into Ball Bearings, Roller Bearings, Plain Bearings and Others. Based on Ball Bearings Type, the market is segmented into Deep Groove Bearings and Others. Based on Roller Bearings Type, the market is segmented into Split, Tapered and Others. Based on Plain Bearings Type, the market is segmented into Journal, Linear, Thrust and Others. Based on Application, the market is segmented into Automotive, Mining & Construction, Agriculture, Electrical, Railway & Aerospace, Automotive Aftermarket and Others. Based on countries, the market is segmented into Germany, UK, France, Russia, Spain, Italy, and Rest of Europe.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include AB SKF, NSK Ltd., NTN Corporation, RBC Bearings, Inc., Rexnord Corporation (Regal Rexnord Corporation), Schaeffler AG, The Timken Company, JTEKT Corporation, Harbin Bearing Manufacturing Co. Ltd. (HRB Group) and HKT Bearings Limited.
Mounted Bearings are mechanical assemblies comprised of bearings enclosed within bolt-on or threaded mounting components, such as pillow blocks, flanged units, and so on. They support rotating shafts and reduce friction between rotating shafts and static machine components. Mounted bearings are generally employed in machines with rotating shafts that are exposed. They are utilized as take-up devices at the ends of elevators as well as flanged units at intermediate locations. The bearings may be either rolling elements or journal bearings. Mounted bearings are designed for bolt-on installation and replacement convenience.
Slide bearings are mechanical assemblies intended to provide one-dimensional free motion between structural parts. Bridges and commercial and industrial structures rely heavily on slide bearings for structural stability. These components tolerate thermal movement, permit end-beam rotation, and insulate structural components from vibration, noise, and shock. There are also sliding bearings utilized on truss base plates, heat transfer, and process equipment.
Radial ball bearings are utilized primarily for shafts with radial loads and mild axial loads. In addition to their radial capabilities, angular contact ball bearings may accommodate greater axial loads in one direction. There is also ball thrust bearings that are meant solely for axial stresses. The most typical form for radial ball bearings is the single-row variant, which may be shielded or sealed depending on whether it will be used in a protected environment, such as a transmission, or in an exposed environment, such as a bicycle wheel.
The Digital Railway, a government-supported nationwide initiative, intends to greatly enhance train control, command, and signalling systems within a single generation. The rail industry plans to modernize Britain's rail infrastructure by selectively implementing cutting-edge train control and signalling systems. In the previous 30 years or so, train usage in Britain has about doubled. During peak hours, Britain's trains are jammed on congested networks in commuter areas, similar to the congested roads.
The Germany market dominated the Europe Bearing Market by Country in 2021; thereby, achieving a market value of $12.0 billion by 2028. The UK market is exhibiting a CAGR of 7.5% during (2022-2028). Additionally, The France market would experience a CAGR of 9.2% during (2022-2028).
Based on Product, the market is segmented into Ball Bearings, Roller Bearings, Plain Bearings and Others. Based on Ball Bearings Type, the market is segmented into Deep Groove Bearings and Others. Based on Roller Bearings Type, the market is segmented into Split, Tapered and Others. Based on Plain Bearings Type, the market is segmented into Journal, Linear, Thrust and Others. Based on Application, the market is segmented into Automotive, Mining & Construction, Agriculture, Electrical, Railway & Aerospace, Automotive Aftermarket and Others. Based on countries, the market is segmented into Germany, UK, France, Russia, Spain, Italy, and Rest of Europe.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include AB SKF, NSK Ltd., NTN Corporation, RBC Bearings, Inc., Rexnord Corporation (Regal Rexnord Corporation), Schaeffler AG, The Timken Company, JTEKT Corporation, Harbin Bearing Manufacturing Co. Ltd. (HRB Group) and HKT Bearings Limited.
Scope of the Study
By Product
- Ball Bearings
- Deep Groove Bearings
- Others
- Roller Bearings
- Split
- Tapered
- Others
- Plain Bearings
- Journal
- Linear
- Thrust
- Others
- Others
By Application
- Automotive
- Mining & Construction
- Agriculture
- Electrical
- Railway & Aerospace
- Automotive Aftermarket
- Others
By Country
- Germany
- UK
- France
- Russia
- Spain
- Italy
- Rest of Europe
Key Market Players
List of Companies Profiled in the Report:
- AB SKF
- NSK Ltd.
- NTN Corporation
- RBC Bearings, Inc.
- Rexnord Corporation (Regal Rexnord Corporation)
- Schaeffler AG
- The Timken Company
- JTEKT Corporation
- Harbin Bearing Manufacturing Co. Ltd. (HRB Group)
- HKT Bearings Limited
Unique Offerings
- Exhaustive coverage
- The highest number of market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 3. Competition Analysis - Global
Chapter 4. Europe Bearing Market by Product
Chapter 5. Europe Bearing Market by Application
Chapter 6. Europe Bearing Market by Country
Chapter 7. Company Profiles
Companies Mentioned
- AB SKF
- NSK Ltd.
- NTN Corporation
- RBC Bearings, Inc.
- Rexnord Corporation (Regal Rexnord Corporation)
- Schaeffler AG
- The Timken Company
- JTEKT Corporation
- Harbin Bearing Manufacturing Co. Ltd. (HRB Group)
- HKT Bearings Limited
Methodology
LOADING...
