The global pollution absorbing bricks market was valued at $5.31 Billion in 2022 and is estimated to reach $9.66 Billion by 2032, registering a CAGR of 6.1% from 2023 to 2032.
Pollution absorbing brick is an advanced construction material that causes lower air pollution while manufacturing. Such bricks exhibit a specific coating that helps it to collect and neutralize hazardous pollutants. Hence, these bricks are employed in a wide range of industries, Including green construction, urban infrastructure, noise barriers, and building facades.
The growth of the global pollution absorbing bricks market is majorly driven by advancements in manufacturing technology of pollution absorbing bricks. Many major developers in the market are offering innovative products; for instance, in May 2021, Vandersanden Group developed its new type of pollution absorbing brick that degrades pollutants when exposed to sunlight using photocatalytic technology. According to the company, the bricks can reduce nitrogen oxide levels in urban areas by up to 50%. Thus, development of technology makes work easier and drives the growth of the pollution absorbing bricks market.
However, manufacturing pollution absorbing bricks is more expensive than traditional bricks. Such a difference in cost can discourage their adoption, particularly in regions or industries with tight budgets or in cost-sensitive markets. In addition, the higher upfront costs may deter builders and developers from considering pollution absorbing bricks, even if their long-term benefits outweigh the initial investment. Hence, such lack of awareness and education and higher upfront costs restrain the market growth.
On the contrary, a rise in construction activities owing to rapid urbanization and industrialization of developing nations is expected to open new avenues for the key players. Thus, the market is majorly driven by surge in demand for infrastructure and building projects. The necessity for building new infrastructure is being driven by the ongoing development of sectors, Including residential and nonresidential construction. For insulation and pollution reduction, concrete and clay pollution absorbing bricks are high in demand for the building sector. In addition, such materials are more eco-friendly and less harmful, as a result, the adoption of pollution absorbing bricks is Increasing, which is expected to notably contribute toward the market growth in developing countries.
The global pollution absorbing bricks market is segmented into material type, application, end user, and region. On the basis of material type, the market is bifurcated into concrete and clay. The concrete segment dominated the market in 2022. Depending on application, the market is classified into structural and non-structural. The structural segment generated the highest revenue in 2022. By end user, the market is divided into residential and nonresidential. The residential segment was the major revenue contributor in 2022.
Region wise, the is analyzed across North America (the U.S., Canada, and Mexico), Europe (Germany, the UK, France, Italy, and rest of Europe), Asia-Pacific (China, India, Japan, South Korea, and rest of Asia-Pacific), and LAMEA (Latin America, Middle East, and Africa).
In 2022, North America was the key shareholder, however, LAMEA is anticipated to secure a leading position during the forecast period.
Pollution absorbing brick is an advanced construction material that causes lower air pollution while manufacturing. Such bricks exhibit a specific coating that helps it to collect and neutralize hazardous pollutants. Hence, these bricks are employed in a wide range of industries, Including green construction, urban infrastructure, noise barriers, and building facades.
The growth of the global pollution absorbing bricks market is majorly driven by advancements in manufacturing technology of pollution absorbing bricks. Many major developers in the market are offering innovative products; for instance, in May 2021, Vandersanden Group developed its new type of pollution absorbing brick that degrades pollutants when exposed to sunlight using photocatalytic technology. According to the company, the bricks can reduce nitrogen oxide levels in urban areas by up to 50%. Thus, development of technology makes work easier and drives the growth of the pollution absorbing bricks market.
However, manufacturing pollution absorbing bricks is more expensive than traditional bricks. Such a difference in cost can discourage their adoption, particularly in regions or industries with tight budgets or in cost-sensitive markets. In addition, the higher upfront costs may deter builders and developers from considering pollution absorbing bricks, even if their long-term benefits outweigh the initial investment. Hence, such lack of awareness and education and higher upfront costs restrain the market growth.
On the contrary, a rise in construction activities owing to rapid urbanization and industrialization of developing nations is expected to open new avenues for the key players. Thus, the market is majorly driven by surge in demand for infrastructure and building projects. The necessity for building new infrastructure is being driven by the ongoing development of sectors, Including residential and nonresidential construction. For insulation and pollution reduction, concrete and clay pollution absorbing bricks are high in demand for the building sector. In addition, such materials are more eco-friendly and less harmful, as a result, the adoption of pollution absorbing bricks is Increasing, which is expected to notably contribute toward the market growth in developing countries.
The global pollution absorbing bricks market is segmented into material type, application, end user, and region. On the basis of material type, the market is bifurcated into concrete and clay. The concrete segment dominated the market in 2022. Depending on application, the market is classified into structural and non-structural. The structural segment generated the highest revenue in 2022. By end user, the market is divided into residential and nonresidential. The residential segment was the major revenue contributor in 2022.
Region wise, the is analyzed across North America (the U.S., Canada, and Mexico), Europe (Germany, the UK, France, Italy, and rest of Europe), Asia-Pacific (China, India, Japan, South Korea, and rest of Asia-Pacific), and LAMEA (Latin America, Middle East, and Africa).
In 2022, North America was the key shareholder, however, LAMEA is anticipated to secure a leading position during the forecast period.
Competition Analysis
Key companies profiled in the pollution absorbing bricks market report Include
Wienerberger, Ramtsilo Bricks & Construction, Ecobrick Alliance Earth Enterprise, Acme Brick Company, Midwest Block & brick, Triangle Brick Co., Brampton Brick, General Shale Inc., Glen-Gery Corporation, and Carolina Ceramics Brick Company.Key Benefits For Stakeholders
- This report provides a quantitative analysis of the market segments, current trends, estimations, and dynamics of the pollution absorbing bricks market analysis from 2022 to 2032 to identify the prevailing pollution absorbing bricks market opportunities.
- The market research is offered along with information related to key drivers, restraints, and opportunities.
- Porter's five forces analysis highlights the potency of buyers and suppliers to enable stakeholders make profit-oriented business decisions and strengthen their supplier-buyer network.
- In-depth analysis of the pollution absorbing bricks market segmentation assists to determine the prevailing market opportunities.
- Major countries in each region are mapped according to their revenue contribution to the global market.
- Market player positioning facilitates benchmarking and provides a clear understanding of the present position of the market players.
- The report Includes the analysis of the regional as well as global pollution absorbing bricks market trends, key players, market segments, application areas, and market growth strategies.
Key Market Segments
By End User
- Residential Sector
- Non-Residential Sector
By Application
- Structural
- Non-Structural
By Material Type
- Concrete
- Clay
By Region
- North America
- U.S.
- Canada
- Mexico
- Europe
- Germany
- UK
- France
- Italy
- Rest of Europe
- Asia-Pacific
- China
- Japan
- South Korea
- India
- Rest of Asia-Pacific
- LAMEA
- Latin America
- Middle East
- Africa
Key Market Players
- Acme Brick Company
- Brampton Brick
- Carolina Ceramics Brick Company
- Ecobrick Alliance Earth Enterprise
- GENERAL SHALE, Inc.
- glen-gery corporation
- Midwest Block & brick
- Ramtsilo Bricks & Construction
- Triangle Brick Co.
- Wienerberger
Table of Contents
CHAPTER 1: INTRODUCTION
CHAPTER 2: EXECUTIVE SUMMARY
CHAPTER 3: MARKET OVERVIEW
CHAPTER 4: POLLUTION ABSORBING BRICKS MARKET, BY MATERIAL TYPE
CHAPTER 5: POLLUTION ABSORBING BRICKS MARKET, BY END USER
CHAPTER 6: POLLUTION ABSORBING BRICKS MARKET, BY APPLICATION
CHAPTER 7: POLLUTION ABSORBING BRICKS MARKET, BY REGION
CHAPTER 8: COMPETITIVE LANDSCAPE
CHAPTER 9: COMPANY PROFILES
List of Tables
List of Figures
Executive Summary
The Pollution Absorbing Bricks Market is likely to experience a significant growth rate of 6.1% from 2022-2032 owing to increasing market demand from the Residential and Non-Residential sector.Pollution absorbing brick is a sustainable construction material that helps in reduction of air pollution. In addition, such bricks work on the principle of air filtration. These bricks clean the air outside before supplying it to the interior of the building. They clean the air by removing dust and other impurities, making it safe to inhale. Furthermore, such brick are made up of a special additive or coating such as photocatalytic coatings and surface coatings that enable them to absorb and neutralize harmful pollutants present in the air.
Rise in awareness regarding use of sustainable and environmentally friendly construction material and their impact on the environment acts as the key driving force of the global pollution absorbing bricks market. In addition, pollution absorption bricks offer an advanced solution for reducing pollution by filtering hazardous substances from the air, water, or soil. This reduces pollutant levels and improves the standard of living. Moreover, pollution, especially air pollution, has an adverse impact on human health. Furthermore, pollution absorption bricks improve the air quality and reduce the risk of respiratory illnesses, allergies, sickness, and other health issues by reducing the number of pollutants in the surrounding environment. Therefore, such benefits fuel the growth of the market.
However, lack of awareness regarding multiple benefits associated with pollution absorbing bricks among numerous customers, developers, or builders restrains the market growth. In addition, low demand for certain materials because of lack of knowledge regarding such advanced technology materials lowers the level of acceptance. To ensure that stakeholders are aware of the benefits of pollutant absorption bricks and their possible effects on the environment and human health, education and awareness efforts are essential. Moreover, manufacturing of pollution absorbing bricks is more expensive than producing conventional building materials. Investment is limiting its adoption for all types of construction. Hence, such lack of awareness and education and higher upfront costs restrain the market growth.
On the contrary, the construction industry is growing at a notable pace due to rapid urbanization and industrialization of developing nations. The market growth is majorly driven by increase in demand for infrastructure and building projects. The necessity for building new infrastructure is being driven by the ongoing development of the residential and nonresidential construction sectors. For insulation and pollution reduction, concrete and clay pollution absorbing bricks are in high demand in the building sector, as they are eco-friendly and less harmful. In addition, rapid urbanization in many regions has led to increased air pollution levels, with pollutants originating from various sources such as vehicles, industries, and construction activities. In addition, the demand for pollution absorbing bricks in residential applications is rising significantly as the migration toward cities is increasing to lessen the negative impacts of air pollution and for healthier living conditions. In addition, governments and regulatory bodies are implementing initiatives and providing incentives to promote sustainable and green building practices. This includes encouraging the use of pollution absorbing bricks in residential applications to improve air quality and reduce environmental impact. Such government initiatives and incentives contribute toward the growing demand for pollution absorbing bricks in the residential sector. Moreover, for different nonresidential buildings such as offices and hospitals, higher priority is given for maintaining a safe and healthy environment for clients, visitors, and staff. The use of pollution absorbing bricks in the nonresidential sector aims to reduce air pollution, create healthier environments, and prioritize the well-being of occupants, visitors, and workers. By incorporating these bricks into various nonresidential applications, organizations can contribute to cleaner air and promote a more sustainable approach to building design and construction. Hence, such a need drives the growth of the market.
The global pollution absorption bricks market is segmented into material type, application, end user, and region. On the basis of material type, the market is bifurcated into concrete and clay. By application, it is classified into structural and nonstructural. Depending on end user, it is divided into residential and nonresidential. Region wise, it is analyzed across North America (the U.S., Canada, and Mexico), Europe (UK, Germany, France, Spain, Italy, Netherlands, and rest of Europe). Asia-Pacific (China, Japan, India, South Korea, and rest of Asia-Pacific), and LAMEA (Latin America, the Middle East, and Africa).
Key Market Insights
- By material type, the concrete segment is expected to experience rapid growth in the market and is projected to grow at a CAGR of 5.4% from 2023 to 2032.
- By end user, the residential segment is projected to grow at a CAGR of 5.3% during the forecast period.
- By application, the structural segment is projected to grow at a CAGR of 5.5% during the forecast period.
- Region wise, North America is expected to experience growth at the highest rate, registering a CAGR of 4.9% during the forecast period.
Companies Mentioned
- Acme Brick Company
- Brampton Brick
- Carolina Ceramics Brick Company
- Ecobrick Alliance Earth Enterprise
- GENERAL SHALE, INC.
- glen-gery corporation
- Midwest Block & brick
- Ramtsilo Bricks & Construction
- Triangle Brick Co.
- Wienerberger
Methodology
The analyst offers exhaustive research and analysis based on a wide variety of factual inputs, which largely include interviews with industry participants, reliable statistics, and regional intelligence. The in-house industry experts play an instrumental role in designing analytic tools and models, tailored to the requirements of a particular industry segment. The primary research efforts include reaching out participants through mail, tele-conversations, referrals, professional networks, and face-to-face interactions.
They are also in professional corporate relations with various companies that allow them greater flexibility for reaching out to industry participants and commentators for interviews and discussions.
They also refer to a broad array of industry sources for their secondary research, which typically include; however, not limited to:
- Company SEC filings, annual reports, company websites, broker & financial reports, and investor presentations for competitive scenario and shape of the industry
- Scientific and technical writings for product information and related preemptions
- Regional government and statistical databases for macro analysis
- Authentic news articles and other related releases for market evaluation
- Internal and external proprietary databases, key market indicators, and relevant press releases for market estimates and forecast
Furthermore, the accuracy of the data will be analyzed and validated by conducting additional primaries with various industry experts and KOLs. They also provide robust post-sales support to clients.
LOADING...
Table Information
| Report Attribute | Details |
|---|---|
| No. of Pages | 212 |
| Published | June 2023 |
| Forecast Period | 2022 - 2032 |
| Estimated Market Value ( USD | $ 5.31 Billion |
| Forecasted Market Value ( USD | $ 9.66 Billion |
| Compound Annual Growth Rate | 6.2% |
| Regions Covered | Global |
| No. of Companies Mentioned | 10 |
![Oil Pollution Remediation Materials Market Size and Forecasts, Global and Regional Share, Trend, and Growth Opportunity Analysis Report Coverage: By Type [Physical Remediation, Chemical Remediation, Thermal Remediation, and Bioremediation] - Product Image](http://www.researchandmarkets.com/product_images/12628/12628665_60px_jpg/market_research_report.jpg)
