Anchor and Grout - Global Strategic Business Report

The global market for Anchor and Grout was valued at US$1.6 Billion in 2024 and is projected to reach US$2.1 Billion by 2030, growing at a CAGR of 4.6% from 2024 to 2030. This comprehensive report provides an in-depth analysis of market trends, drivers, and forecasts, helping you make informed business decisions. The report includes the most recent global tariff developments and how they impact the Anchor and Grout market.

Global Anchor and Grout Market - Key Trends & Drivers Summarized

Why Are Anchor and Grout Systems Essential to Structural Integrity and Load-Bearing Performance?

Anchor and grout systems serve as the foundational reinforcement elements in a wide range of construction and infrastructure projects, enabling the transfer of structural loads into stable substrates. Anchoring systems - mechanical or chemical - provide secure fixation for steel bars, bolts, and rebar within concrete or rock, while grouts fill voids, seal joints, and improve load distribution around embedded elements. Together, they form critical support mechanisms that ensure long-term structural stability, safety, and resistance to mechanical stress, dynamic loads, and environmental degradation.

These systems are indispensable in high-stakes applications such as bridge construction, tunnels, dams, wind turbines, high-rise buildings, and offshore platforms. They are used to secure pre- and post-tensioned cables, anchor machinery, stabilize soil and rock masses, and repair deteriorating structures. Grout compounds - ranging from cementitious and epoxy to polyurethane and hybrid formulations - are engineered for precise flowability, shrinkage control, and chemical resistance, adapting to diverse site and material conditions.

As construction designs evolve to accommodate taller buildings, larger spans, and increased seismic resilience, the demand for anchoring and grouting systems with enhanced mechanical properties, long-term durability, and accelerated curing is rising. Advanced solutions that enable higher pull-out strength, fast application, and compatibility with dynamic loading conditions are becoming essential. These technologies support not just new builds but also rehabilitation and retrofitting of aging infrastructure, where anchoring integrity is often mission-critical.

How Are Material Advancements and Application Technologies Enhancing System Performance?

Innovations in material chemistry are enabling next-generation anchor and grout solutions with superior bond strength, lower shrinkage, and better adhesion to a variety of substrates - including steel, concrete, masonry, and rock. Epoxy-based anchoring adhesives now offer excellent load-bearing capabilities even in cracked concrete or seismic zones, while hybrid grouts are being designed to combine the early strength gain of cementitious systems with the flexibility of polymers. These enhancements improve structural reliability while minimizing failure risks over the long service life of assets.

Application technologies are also progressing, with pre-packaged grout cartridges, self-mixing injection systems, and robotic grout placement units enhancing precision, reducing human error, and accelerating on-site workflows. In tunneling and mining, for example, automated grouting systems allow consistent injection under high pressure to fill voids, reinforce boreholes, and control groundwater ingress. In anchoring, the availability of fast-curing chemical anchors that function across wet, cold, or underwater environments is extending installation possibilities in challenging geotechnical conditions.

Performance monitoring and quality assurance have also become more data-driven, with real-time pressure sensors, injection flow monitors, and digital logging improving the traceability of grout volume, pressure levels, and curing times. These technologies are increasingly integrated into BIM (Building Information Modeling) systems, enabling engineers to track anchor and grout performance throughout the construction lifecycle. This feedback loop supports proactive maintenance and reduces the likelihood of structural degradation, particularly in mission-critical infrastructure projects.

Which Sectors and Geographies Are Driving Demand for Anchor and Grout Solutions?

The civil infrastructure segment - including bridges, highways, railways, ports, and dams - is a dominant end-use sector for anchor and grout systems, supported by global investments in urbanization and transport connectivity. Public and private funding for smart cities, renewable energy projects, and climate-resilient infrastructure is further expanding demand for high-performance anchoring and grouting materials. The energy sector, especially wind and hydropower installations, also uses these systems extensively for turbine base stabilization, equipment anchoring, and structural repairs in remote and offshore environments.

Commercial and industrial construction is another strong demand driver, particularly for anchor systems that offer high pull-out strength and rapid installation for equipment foundations, storage facilities, and structural reinforcements. In mining and tunneling, cementitious and chemical grouts are used for ground consolidation, face stabilization, and leakage control, especially in complex geological formations. The use of fast-setting, expansive grouts supports high productivity in shaft sinking, underground caverns, and metro rail development projects.

Geographically, Asia-Pacific leads global demand due to large-scale infrastructure development in China, India, Indonesia, and Southeast Asia. Governments across the region are prioritizing transportation networks, energy infrastructure, and resilient urban planning - driving the uptake of anchoring and grouting technologies. North America and Europe remain mature markets focused on upgrading aging infrastructure and adopting advanced grouting formulations that meet sustainability, fire resistance, and low-VOC standards. Meanwhile, Middle East and Africa markets are gaining traction with ongoing investments in megaprojects, industrial facilities, and geotechnical engineering initiatives.

How Are Environmental Regulations, Performance Standards, and Lifecycle Cost Considerations Influencing Innovation?

Sustainability pressures and stricter environmental regulations are compelling manufacturers to reformulate grout and anchor products with lower carbon footprints, reduced VOC emissions, and safer handling profiles. Eco-friendly cement alternatives, recycled filler materials, and water-based chemical formulations are gaining ground in green construction initiatives. In LEED- or BREEAM-certified projects, anchor and grout materials must meet criteria for recyclability, embodied energy reduction, and end-of-life environmental impact.

Compliance with international standards - such as EN 1504 for structural repairs, ASTM C1107 for non-shrink grout, and ACI/ICC guidelines for anchoring to concrete - is increasingly defining material adoption. These frameworks govern aspects such as compressive strength, bond performance, curing time, chemical resistance, and fire rating. Certification ensures quality assurance for critical infrastructure, especially in regions with seismic activity or high-load environments. Manufacturers are investing in testing, documentation, and digital compliance support to meet these evolving benchmarks.

Lifecycle cost considerations are also influencing procurement decisions, with stakeholders focusing on the total cost of ownership rather than upfront material expenses. This includes installation efficiency, material waste, labor costs, and long-term maintenance. Fast-curing, self-leveling, and shrinkage-compensated grouts are reducing rework and ensuring consistent load transfer. Similarly, corrosion-resistant anchors and high-durability formulations are being selected for their ability to extend service life and reduce intervention frequency - especially in corrosive marine or industrial environments.

What Are the Factors Driving Growth in the Anchor and Grout Market?

The anchor and grout market is experiencing steady growth propelled by a convergence of factors, including the global surge in infrastructure development, rising demand for structural retrofitting, and technological advancements in construction materials. These systems are crucial to enhancing load-bearing capacity, improving structural resilience, and ensuring long-term safety across transportation, energy, commercial, and civil engineering projects. Their role in both greenfield development and brownfield restoration makes them indispensable to modern construction ecosystems.

Emerging trends such as modular construction, digital construction workflows, and performance-based contracting are accelerating the demand for faster, more reliable anchoring and grouting solutions. The push toward automation and precision in construction practices is creating new opportunities for pre-engineered, quality-certified systems that reduce onsite complexity. Meanwhile, the shift toward resilient and climate-adaptive infrastructure is boosting the need for specialized grouts and anchors designed to perform under dynamic, corrosive, and high-load conditions.

Looking forward, the market’s evolution will depend on how effectively anchor and grout solutions adapt to the intersecting demands of performance, compliance, speed, and sustainability. As construction practices evolve and infrastructure becomes increasingly mission-critical, could these systems emerge as the silent enablers of structural safety, long-term performance, and environmental resilience?

Report Scope

The report analyzes the Anchor and Grout market, presented in terms of market value (US$ Thousand). The analysis covers the key segments and geographic regions outlined below.

Segments: Product (Cementitious Fixing Anchors & Grouts, Resin Fixing Anchors & Grouts, Other Products); Application (Residential Use, Commercial Use, Industrial Use, Other Applications).

Geographic Regions/Countries: World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Key Insights:

• Market Growth: Understand the significant growth trajectory of the Cementitious Fixing Anchors & Grouts segment, which is expected to reach US$1.3 Billion by 2030 with a CAGR of a 4.9%. The Resin Fixing Anchors & Grouts segment is also set to grow at 3.6% CAGR over the analysis period.
• Regional Analysis: Gain insights into the U.S. market, valued at $442.2 Million in 2024, and China, forecasted to grow at an impressive 7.3% CAGR to reach $417.1 Million by 2030. Discover growth trends in other key regions, including Japan, Canada, Germany, and the Asia-Pacific.

Why You Should Buy This Report:

• Detailed Market Analysis: Access a thorough analysis of the Global Anchor and Grout Market, covering all major geographic regions and market segments.
• Competitive Insights: Get an overview of the competitive landscape, including the market presence of major players across different geographies.
• Future Trends and Drivers: Understand the key trends and drivers shaping the future of the Global Anchor and Grout Market.
• Actionable Insights: Benefit from actionable insights that can help you identify new revenue opportunities and make strategic business decisions.

Key Questions Answered:

• How is the Global Anchor and Grout Market expected to evolve by 2030?
• What are the main drivers and restraints affecting the market?
• Which market segments will grow the most over the forecast period?
• How will market shares for different regions and segments change by 2030?
• Who are the leading players in the market, and what are their prospects?

Report Features:

• Comprehensive Market Data: Independent analysis of annual sales and market forecasts in US$ Million from 2024 to 2030.
• In-Depth Regional Analysis: Detailed insights into key markets, including the U.S., China, Japan, Canada, Europe, Asia-Pacific, Latin America, Middle East, and Africa.
• Company Profiles: Coverage of players such as Ancon Building Products, Arkema S.A., BASF SE, Bostik, CHRYSO S.A.S. and more.
• Complimentary Updates: Receive free report updates for one year to keep you informed of the latest market developments.

Some of the 48 companies featured in this Anchor and Grout market report include:

• Ancon Building Products
• Arkema S.A.
• BASF SE
• Bostik
• CHRYSO S.A.S.
• DeWalt
• Fischer Group
• Fosroc International Ltd.
• Gantrex Group
• GCP Applied Technologies
• Hilti Corporation
• Indcon Inc.
• ITW Ramset
• King Packaged Materials Company
• MAPEI S.p.A.
• MBCC Group
• MUHU (China) Construction Materials Co., Ltd.
• Mungo Befestigungstechnik AG
• Powers Fasteners
• Red Head Anchors

Tariff Impact Analysis: Key Insights for 2025

Global tariff negotiations across 180+ countries are reshaping supply chains, costs, and competitiveness. This report reflects the latest developments as of April 2025 and incorporates forward-looking insights into the market outlook.

The analysts continuously track trade developments worldwide, drawing insights from leading global economists and over 200 industry and policy institutions, including think tanks, trade organizations, and national economic advisory bodies. This intelligence is integrated into forecasting models to provide timely, data-driven analysis of emerging risks and opportunities.

What's Included in This Edition:

• Tariff-adjusted market forecasts by region and segment
• Analysis of cost and supply chain implications by sourcing and trade exposure
• Strategic insights into geographic shifts

Buyers receive a free July 2025 update with:

• Finalized tariff impacts and new trade agreement effects
• Updated projections reflecting global sourcing and cost shifts
• Expanded country-specific coverage across the industry