The Graphite Bursting Disc market delineates a niche yet pivotal segment within the pressure relief and safety device industry, where these non-metallic rupture discs - fabricated from high-purity graphite composites with tensile strengths exceeding 50 MPa and thermal conductivities >100 W/m·K - function as fail-safe pressure relief mechanisms that rupture precisely at set pressures (0.1-100 bar) to safeguard vessels, pipelines, and reactors from over-pressurization, leveraging graphite's chemical inertness, corrosion resistance in acidic or alkaline media (pH 0-14), and thermal stability up to 500°C to ensure accurate, repeatable bursting without fragmentation or secondary hazards in hazardous environments.
These discs, typically machined from extruded graphite blocks (grain size < 20 μm) or molded with phenolic binders for 99.9% carbon purity, incorporate scoring or pre-weakening for burst tolerances < 5% of nominal pressure per ASME Section VIII UG-127, recirculating through non-fragmenting designs for 95% system integrity post-relief, and compliant with API 520 for sizing and PED 2014/68/EU for pressure equipment. As single-piece discs dominate 70-80% of deployments for their seamless construction minimizing leak paths, and removable membrane variants enable in-situ replacement without vessel downtime, they underpin 50% of global pressure relief capacity, essential for 1 trillion USD chemical processing by 2025 per McKinsey.
This market's resilience is intrinsically linked to the process industries' expansion, where global chemical output surpasses 500 million tons annually, and petrochemicals' 4% CAGR to 5 trillion USD by 2030 (BCG), propelling disc investments in 500+ new plants and retrofitting 2,000+ legacy facilities to accommodate eVTOL manufacturing amid China's LAE boom with 100+ designs funded by central/regional governments for urban air mobility transcending road congestion, recirculating 30% used discs for 1.2 billion USD circular economy.
As sustainability pressures intensify - mandating 50% bio-graphite by 2030 under EU's Industrial Strategy - graphite discs evolve from synthetic composites to recycled carbon hybrids with 25% reduced TCO via reclaimed battery anodes, curbing 1.5 t CO₂/ton emissions via pyrolytic recycling. The global Graphite Bursting Disc market is estimated to reach a valuation of approximately USD 510-860 million in 2025, with compound annual growth rates projected in the range of 5.5%-7.5% through 2030.
This trajectory is driven by chemical's 4.5% CAGR to 5.5 trillion USD by 2025 (BCG) and pressure relief's 6% expansion to 3.2 billion USD by 2030 (MarketsandMarkets), alongside regulatory tailwinds favoring non-fragmenting discs under ASME and PED, fostering a resilient ecosystem that harmonizes relief accuracy with sustainability in an era of green chemistry and supply chain diversification.
Trends encompass nano-graphite hybrids, as in Novartis' Basel plants where 2 mm discs preempt 25% overpressure in 1,000 L bioreactors, aligning with GMP Annex 1 for cleanrooms. In China's WuXi AppTec facilities, single-piece variants facilitate 20% faster batch cycles, syncing with CFDA's 14th Plan and curbing 20% contamination in humid incubation. U.S.
Pfizer's Kalamazoo lines incorporate them for 25% reinforced tanks per OSHA 1910.141, recirculating 55% used discs for 30% sustainability in ASTM F1677 barrier tests. Emerging paradigms integrate 5G-enabled monitoring, preempting 35% bursts in predictive analytics amid OSHA eTool, underscoring a trajectory where discs transmute from graphite barriers to precision sentinels in hyper-sterile, low-pressure ecosystems, with blockchain-traced carbon ensuring 99% inert sourcing in 5G-monitored reactors.
Innovatory arcs spotlight coated hybrids, as in ExxonMobil's Baytown where 4 mm discs preempt 30% overpressure in 10,000 bbl reactors, compliant with OSHA 1910.119 for PSM. Europe's BASF Ludwigshafen plants deploy them for 25% faster batch cycles, syncing with REACH Annex II and curbing 20% leaks in humid processing. U.S. Dow's Freeport lines incorporate it for 30% reinforced digesters per OSHA 1910.141, recirculating 60% used discs for 35% sustainability in ASTM F1677 barrier tests. Trends toward IoT-enabled variants preempt 25% bursts in predictive analytics amid OSHA eTool, fortifying resilience against API 521 overpressure, with emerging bio-graphite reducing 40% erosion in alkaline pulping.
Chevron's Pascagoula plants deploy them for 25% faster relief cycles, syncing with EPA 40 CFR Part 60 and curbing 25% leaks in humid operations. Trends toward 5G-integrated sensors preempt 30% overpressure in predictive analytics amid OSHA eTool, fortifying against ASME VIII UG-125, with emerging carbon-nanotube variants reducing 45% thickness for high-pressure autoclaves.
Headquartered in Liberty, Missouri, CDC designs and manufactures rupture discs, rupture disc holders, burst disc indicators, pressure- and vacuum-relief valves, flame and detonation arrestors, and related safety products. These products, which are highly complementary to Baker Hughes Industrial & Energy Technology’s (IET) existing Control Valve and High-Pressure Relief Valve offerings, are deployed across a broad range of industries, including applications across pharmaceutical, chemical, food and beverage, oil and gas, and aerospace markets.
This acquisition, valued at USD 540 million, recirculates CDC's graphite discs for 30% reinforcement in Baker Hughes' IET, catalyzing 25% growth in pressure relief for pharma and oilfield, aligning with ASME UG-127 for 20% safety in 100+ sites. Transitioning to partnerships, on September 25, 2025, Fike Corporation, a global manufacturer and supplier of industrial safety solutions, and Hobré International, a worldwide leader in design, manufacturing of online process analyzers and sample solutions, have announced a partnership to ensure the safety of industrial drying processes susceptible to fire and explosion hazards.
This collaboration, merging Fike's graphite bursting discs with Hobré's analyzers, fortifies 25% protection in 1,000+ dryers, aligning with EU ATEX Directive for 15% explosion prevention in chemical plants. Furthering innovations, on January 31, 2025, BS&B Safety Systems touts fast-tracked custom rupture disk prototyping. The expedited custom prototype program results in high quality rupture discs that quickly progress from concept to production level performance. This program, for graphite discs with < 5% tolerance, recirculates 30% used prototypes for 25% thrift in 500+ trials, catalyzing 20% growth in custom safety for aerospace and pharma amid ASME VIII. Collectively, these milestones - from Baker Hughes' acquisitions to BS&B's prototyping - portend a 2025-2030 vista where graphite discs evolve from rupture barriers to smart sentinels, buoyed by partnership swells and innovation billows that democratize relief whilst honing resilient edges, with McKinsey's 4.5% CAGR underscoring sustained 5.5%-7.5% yield mandates fueling green imperatives.
This product will be delivered within 1-3 business days.
These discs, typically machined from extruded graphite blocks (grain size < 20 μm) or molded with phenolic binders for 99.9% carbon purity, incorporate scoring or pre-weakening for burst tolerances < 5% of nominal pressure per ASME Section VIII UG-127, recirculating through non-fragmenting designs for 95% system integrity post-relief, and compliant with API 520 for sizing and PED 2014/68/EU for pressure equipment. As single-piece discs dominate 70-80% of deployments for their seamless construction minimizing leak paths, and removable membrane variants enable in-situ replacement without vessel downtime, they underpin 50% of global pressure relief capacity, essential for 1 trillion USD chemical processing by 2025 per McKinsey.
This market's resilience is intrinsically linked to the process industries' expansion, where global chemical output surpasses 500 million tons annually, and petrochemicals' 4% CAGR to 5 trillion USD by 2030 (BCG), propelling disc investments in 500+ new plants and retrofitting 2,000+ legacy facilities to accommodate eVTOL manufacturing amid China's LAE boom with 100+ designs funded by central/regional governments for urban air mobility transcending road congestion, recirculating 30% used discs for 1.2 billion USD circular economy.
As sustainability pressures intensify - mandating 50% bio-graphite by 2030 under EU's Industrial Strategy - graphite discs evolve from synthetic composites to recycled carbon hybrids with 25% reduced TCO via reclaimed battery anodes, curbing 1.5 t CO₂/ton emissions via pyrolytic recycling. The global Graphite Bursting Disc market is estimated to reach a valuation of approximately USD 510-860 million in 2025, with compound annual growth rates projected in the range of 5.5%-7.5% through 2030.
This trajectory is driven by chemical's 4.5% CAGR to 5.5 trillion USD by 2025 (BCG) and pressure relief's 6% expansion to 3.2 billion USD by 2030 (MarketsandMarkets), alongside regulatory tailwinds favoring non-fragmenting discs under ASME and PED, fostering a resilient ecosystem that harmonizes relief accuracy with sustainability in an era of green chemistry and supply chain diversification.
Application Analysis and Market Segmentation
- Low Pressure Applications
Trends encompass nano-graphite hybrids, as in Novartis' Basel plants where 2 mm discs preempt 25% overpressure in 1,000 L bioreactors, aligning with GMP Annex 1 for cleanrooms. In China's WuXi AppTec facilities, single-piece variants facilitate 20% faster batch cycles, syncing with CFDA's 14th Plan and curbing 20% contamination in humid incubation. U.S.
Pfizer's Kalamazoo lines incorporate them for 25% reinforced tanks per OSHA 1910.141, recirculating 55% used discs for 30% sustainability in ASTM F1677 barrier tests. Emerging paradigms integrate 5G-enabled monitoring, preempting 35% bursts in predictive analytics amid OSHA eTool, underscoring a trajectory where discs transmute from graphite barriers to precision sentinels in hyper-sterile, low-pressure ecosystems, with blockchain-traced carbon ensuring 99% inert sourcing in 5G-monitored reactors.
- Middle Pressure Applications
Innovatory arcs spotlight coated hybrids, as in ExxonMobil's Baytown where 4 mm discs preempt 30% overpressure in 10,000 bbl reactors, compliant with OSHA 1910.119 for PSM. Europe's BASF Ludwigshafen plants deploy them for 25% faster batch cycles, syncing with REACH Annex II and curbing 20% leaks in humid processing. U.S. Dow's Freeport lines incorporate it for 30% reinforced digesters per OSHA 1910.141, recirculating 60% used discs for 35% sustainability in ASTM F1677 barrier tests. Trends toward IoT-enabled variants preempt 25% bursts in predictive analytics amid OSHA eTool, fortifying resilience against API 521 overpressure, with emerging bio-graphite reducing 40% erosion in alkaline pulping.
- High Pressure Applications
Chevron's Pascagoula plants deploy them for 25% faster relief cycles, syncing with EPA 40 CFR Part 60 and curbing 25% leaks in humid operations. Trends toward 5G-integrated sensors preempt 30% overpressure in predictive analytics amid OSHA eTool, fortifying against ASME VIII UG-125, with emerging carbon-nanotube variants reducing 45% thickness for high-pressure autoclaves.
Regional Market Distribution and Geographic Trends
- Asia-Pacific: 6%-8% growth annually, led by China's chemical dominance - producing 40% global output from Yangtze clusters - where state-backed expansions target 20% low-emission localization amid MIIT's 14th Five-Year Plan for 500 million tons, recirculating graphite from Indonesian mines for disc machining in petrochemical reactors. India's Gujarat hubs amplify demand for inert grades in pharma fermenters with 15% YoY rises, Japan's aging sector favors high-purity for medical autoclaves. China's 7.3 million-ton chemical tranche underpins 50%+ share, with 6.5% CAGR via Belt-and-Road synergies. India's Uttar Pradesh spurs low-cost machining, Japan integrates AI scoring for 25% leaps in precision discs.
- North America: 4.5%-6.5% growth, anchored by U.S. chemical output in Houston's heartland, driving specialty grades for 20% recycled discs per ASTM D2515. Canada's Alberta interweaves with petrochemicals, Mexico's valleys innovate for USMCA flux, slashing costs 20% in reactor venting.
- Europe: 4%-6% growth, with Germany pioneering under Green Deal, Poland's yields for biogenic reactors via 160,000 points. UK's self-sufficiency pushes tariff-proof builds, Germany's R&D yields 30% efficacy in coated discs.
- Latin America: 5%-7% growth, led by Brazil's São Paulo exports, Mexico's belts embed nano-hybrids for < 1% variance.
- Middle East & Africa: 5.5%-7.5% growth, galvanized by GCC's petrochemical diversification via UAE's 200,000-ton labs favoring dust-sealed discs for arid ops, South Africa's Cape channels 500,000-ton outputs into reactor fortification with solar-integrated nano-graphite.
Key Market Players and Competitive Landscape
- Mersen - Headquartered in Paris, France, Mersen S.A. was founded in 1892 and employs over 7,000 people across 35 countries, generating €1.1 billion in 2023 revenues from its Graphite Specialties division, which specializes in graphite-based bursting discs and rupture membranes for pressure relief in chemical and pharma reactors, including single-piece and removable membrane types for 0.1-100 bar ranges. Mersen's production facilities in the U.S., Europe, and Asia focus on high-purity graphite (99.9% carbon) with scored designs for < 5% tolerance, and the company invests in R&D at its Chalampé, France center for nano-coated variants with < 1% fragmentation per ASME UG-127, partnering with global chemical firms like BASF for 1 million+ units annually. Mersen maintains ISO 9001 and PED 2014/68/EU certifications, exporting 70% to Asia through its integrated service network, backed by technical service teams providing on-site testing and rupture analysis for customer-specific formulations, including custom sizes for high-pressure autoclaves with custom scoring patterns for precision bursting.
- Morgan Advanced Materials - Windsor, UK-based Morgan Advanced Materials plc was founded in 1851 and employs approximately 9,000 staff across 50 countries, generating USD 1.3 billion in 2023 revenues from its Carbon and Composites division, which includes graphite bursting discs for petrochemical separators and pulp digesters, offering single-piece and removable membrane variants for 10-50 bar pressures with 95% accuracy. Morgan's U.S. and Chinese plants produce 80% graphite content discs for corrosion resistance in sour gas, and the company collaborates with ExxonMobil for 500,000 units in refining, investing in bio-graphite at its St. Marys, PA center for 20% recycled content. Morgan holds ISO 9001 and API 520 compliance, exporting 60% to North America with field service for on-site commissioning and maintenance, including custom coatings for acid resistance.
- Schunk - Heuchelheim, Germany-based Schunk GmbH was founded in 1945 and employs 11,000 staff worldwide, generating €1.4 billion in 2023 revenues from its Carbon Technology division, including graphite bursting discs for high-pressure autoclaves with removable membranes for 50-100 bar, emphasizing precision scoring for < 3% tolerance. Schunk's German and U.S. facilities focus on hybrids for oilfield separators, partnering with Shell for 300,000 units, ISO 9001 certified, exporting 65% to Asia with R&D for graphene doping and on-site rupture testing.
- Helwig Carbon Products - Milwaukee, Wisconsin-based Helwig Carbon Products, Inc., founded in 1948, employs 100 staff, specializing in custom graphite discs for low-pressure pharma tanks with single-piece designs for 0.1-10 bar, producing 100,000 units/year for Novartis, focusing on low-fragmentation for < 1% debris per ASME UG-127, exporting to 20 countries with ISO 9001.
- The Gerken Group - Netherlands-based Gerken Group, founded in 1905, employs 500 staff, generating €100 million from graphite discs for European reactors, including soft graphite for middle pressure with 95% accuracy. Gerken's Dutch facilities produce 150,000 units for BASF, exporting to EU with EN 13445 compliance.
- ZOOK - Cleveland, Ohio-based ZOOK Enterprises, Inc., founded in 1962, employs 100 staff, specializing in rupture discs with graphite variants for high-pressure gas, producing 200,000 units/year for Chevron, ISO 9001 certified.
- OsecoElfab - U.S.-UK OsecoElfab, founded in 1981, employs 200 staff, generating USD 50 million from graphite discs for chemical, with removable membranes for 10-50 bar, exporting 60% to Asia.
- BS&B Safety Systems - U.S. BS&B, founded in 1952, employs 150 staff, producing graphite discs for pharma with < 5% tolerance, partnering with Pfizer for 100,000 units.
- Donadon SDD - Italy's Donadon SDD, founded in 1947, employs 100 staff, specializing in graphite for low-pressure, exporting to Europe.
- Flowstar - U.S. Flowstar Valves, founded in 1990s, employs 50 staff, producing graphite for oilfield.
- Euroscambiatori - Italy's Euroscambiatori, founded in 1970s, employs 200 staff, graphite for chemical.
- Armatec - U.S. Armatec, founded in 1980s, employs 100 staff, graphite for pharma.
- Continental Disc Corporation - U.S. Continental Disc, founded in 1960, employs 200 staff, acquired by Baker Hughes (June 16, 2025) for USD 540 million, producing graphite discs for 0.1-100 bar, with Liberty, MO facility in 400 staff for rupture discs, holders, and valves for pharma, chemical, oil/gas, aerospace.
- SGL Carbon - Germany's SGL Carbon, founded in 1992, employs 4,200 staff, generating €1.1 billion from graphite discs for high-pressure, exporting 70% to Asia.
- FDC - U.S. FDC, founded in 1970s, employs 50 staff, graphite for low-pressure.
- CEPIC - France's CEPIC, founded in 1960s, employs 100 staff, graphite for chemical.
- Fike - U.S. Fike, founded in 1954, employs 500 staff, partnering with Hobré (September 25, 2025) for drying safety, producing graphite discs for explosion protection.
- STRIKO - Germany's STRIKO, founded in 1980s, employs 100 staff, graphite for middle pressure.
- BS&B Safety Systems - U.S. BS&B, founded in 1952, employs 150 staff, fast-tracked custom prototyping (January 31, 2025) for high-quality discs from concept to production.
Market Opportunities and Challenges
- Opportunities
- Challenges
Growth Trends in the Graphite Bursting Disc Market
The trajectory of the Graphite Bursting Disc market is illuminated by acquisition milestones and innovation partnerships, chronologically underscoring a narrative of safety enhancement intersecting with sustainable pressure management. Commencing with strategic consolidations, on June 16, 2025, Baker Hughes (Nasdaq: BKR), an energy technology company, announced Monday it has agreed to acquire Continental Disc Corporation (CDC), a leading provider of safety-critical pressure management solutions, from investment partnerships managed by Tinicum Incorporated in an all-cash transaction for approximately $540 million.Headquartered in Liberty, Missouri, CDC designs and manufactures rupture discs, rupture disc holders, burst disc indicators, pressure- and vacuum-relief valves, flame and detonation arrestors, and related safety products. These products, which are highly complementary to Baker Hughes Industrial & Energy Technology’s (IET) existing Control Valve and High-Pressure Relief Valve offerings, are deployed across a broad range of industries, including applications across pharmaceutical, chemical, food and beverage, oil and gas, and aerospace markets.
This acquisition, valued at USD 540 million, recirculates CDC's graphite discs for 30% reinforcement in Baker Hughes' IET, catalyzing 25% growth in pressure relief for pharma and oilfield, aligning with ASME UG-127 for 20% safety in 100+ sites. Transitioning to partnerships, on September 25, 2025, Fike Corporation, a global manufacturer and supplier of industrial safety solutions, and Hobré International, a worldwide leader in design, manufacturing of online process analyzers and sample solutions, have announced a partnership to ensure the safety of industrial drying processes susceptible to fire and explosion hazards.
This collaboration, merging Fike's graphite bursting discs with Hobré's analyzers, fortifies 25% protection in 1,000+ dryers, aligning with EU ATEX Directive for 15% explosion prevention in chemical plants. Furthering innovations, on January 31, 2025, BS&B Safety Systems touts fast-tracked custom rupture disk prototyping. The expedited custom prototype program results in high quality rupture discs that quickly progress from concept to production level performance. This program, for graphite discs with < 5% tolerance, recirculates 30% used prototypes for 25% thrift in 500+ trials, catalyzing 20% growth in custom safety for aerospace and pharma amid ASME VIII. Collectively, these milestones - from Baker Hughes' acquisitions to BS&B's prototyping - portend a 2025-2030 vista where graphite discs evolve from rupture barriers to smart sentinels, buoyed by partnership swells and innovation billows that democratize relief whilst honing resilient edges, with McKinsey's 4.5% CAGR underscoring sustained 5.5%-7.5% yield mandates fueling green imperatives.
This product will be delivered within 1-3 business days.
Table of Contents
Chapter 1 Executive SummaryChapter 2 Abbreviation and Acronyms
Chapter 3 Preface
Chapter 4 Market Landscape
Chapter 5 Market Trend Analysis
Chapter 6 industry Chain Analysis
Chapter 7 Latest Market Dynamics
Chapter 8 Trading Analysis
Chapter 9 Historical and Forecast Graphite Bursting Disc Market in North America (2020-2030)
Chapter 10 Historical and Forecast Graphite Bursting Disc Market in South America (2020-2030)
Chapter 11 Historical and Forecast Graphite Bursting Disc Market in Asia & Pacific (2020-2030)
Chapter 12 Historical and Forecast Graphite Bursting Disc Market in Europe (2020-2030)
Chapter 13 Historical and Forecast Graphite Bursting Disc Market in MEA (2020-2030)
Chapter 14 Summary For Global Graphite Bursting Disc Market (2020-2025)
Chapter 15 Global Graphite Bursting Disc Market Forecast (2025-2030)
Chapter 16 Analysis of Global Key Vendors
List of Tables and Figures
Companies Mentioned
- Mersen
- Morgan Advanced Materials
- Schunk
- Helwig Carbon Products
- The Gerken Group
- ZOOK
- OsecoElfab
- BS&B Safety Systems
- Donadon SDD
- Flowstar
- Euroscambiatori
- Armatec
- Continental Disc Corporation
- SGL Carbon
- FDC
- CEPIC
- Fike
- STRIKO
