Material Corrosion and Degradation: Challenges and Solutions for the Oil, Gas, and Process Industries outlines the causes and effects of commonly encountered corrosion and degradation issues specific to the oil, gas, and process industries. Sections introduce readers to the fundamental principles of both microbial induced corrosion (MIC) and microbial induced deterioration (MID), investigating different types of corrosion such as stress corrosion cracking and corrosion under insulation. From there, the book analyzes a number of challenges related to corrosion management, such as soil side corrosion in above ground storage tanks, corrosion in aromatic petrochemical plants, and pipeline corrosion management from design to operation.
Following sections cover corrosion countermeasure strategies, such as effective material selection, corrosion behavior in complex concentrated alloys, and coatings and linings as corrosion prevention tools. The distinction between MIC, MID, and other types of corrosion is emphasized throughout.
Following sections cover corrosion countermeasure strategies, such as effective material selection, corrosion behavior in complex concentrated alloys, and coatings and linings as corrosion prevention tools. The distinction between MIC, MID, and other types of corrosion is emphasized throughout.
Table of Contents
1. IntroductionSection I: Mechanisms and Basic Concepts
2. Fundamentals of Corrosion: Understanding the Essence of Material Degradation
3. Inter-granular Corrosion of Stainless Steels
4. Stress Corrosion Cracking (SCC)
5. The Integrity Management of Corrosion Under Insulation (CUI)
6. Technical Approaches on Managing and Avoiding Major Equipment Failure Due to Environmental Assisted Cracking
Section II: Corrosion Challenges
7. Corrosion Challenges to Oil and Gas Operations in Developing Countries of the South-East Asia Region
8. Soil Side Corrosion of Above Ground Storage Tanks in the Oil Refineries and the Petrochemical Plants
9. Corrosion in Aromatic Petrochemical Plants
10. Pipelines Corrosion Management from Design to Operation
Section III: Some Corrosion Countermeasures
11. Material Selection in Oil and Gas Environments Approaches for Practical Applications
12. Corrosion Behaviour of Complex Concentrated Alloys
13. Stray Currents and Oil and Gas Pipelines A South African Perspective
14. Coatings and Linings as Corrosion Prevention Mechanisms: A Practical View on Challenges and Solutions
15. Smart, Advanced Corrosion Management
Section IV: Conclusion and Remarkable Points
