+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)
New

OEM Insulation - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2027-2032)

  • PDF Icon

    Report

  • 120 Pages
  • October 2026
  • Region: Global
  • Mordor Intelligence
  • ID: 6292568
The OEM insulation market size was valued at USD 23.33 billion in 2026 and is estimated to grow from USD 24.63 billion in 2027 to USD 32.63 billion by 2032, at a CAGR of 5.78% during the forecast period (2027-2032). This report is Segmented by Material Type (Mineral Wool, Polyurethane Foam (PUF), Fiberglass and Glass Wool, and More), Insulation Type (Thermal Insulation and Acoustic Insulation), End-User Industry (Industrial and Commercial, Transportation, and More), and Geography (Asia-Pacific, North America, Europe, South America, and Middle East and Africa). The Market Forecasts are Provided in Terms of Value (USD).

Global OEM Insulation Market Trends and Insights

Tightening Energy-Efficiency and Emissions Standards

Regulatory requirements are a central driver of demand in the OEM insulation market across equipment categories. The European Union Construction Products Regulation, EU 2024/3110, requires performance declarations covering thermal conductivity, fire classification, and embodied carbon for products entering European value chains. In the United States, the Department of Energy published energy conservation standards for manufactured housing in July 2025, based on the 2021 International Energy Conservation Code's thermal-envelope provisions. EN 17956 provides energy-efficiency classes for industrial insulation systems across temperatures from -30°C to 650°C, giving equipment specifiers a way to set minimum installed performance levels. These regulations encourage OEM manufacturers to select higher-performing insulation grades across multiple production locations. The OEM insulation market benefits from compliance programs that affect both new equipment design and replacement-related upgrades.

Electrification of Vehicles and Battery Thermal Safety

Vehicle electrification is broadening the range of thermal safety functions expected from OEM insulation materials. China's GB 38031-2025 standard took effect in July 2026 and requires battery packs to resist fire or explosion during thermal runaway. Covestro introduced Baysafe BEF flame-retardant polyurethane encapsulation foam in July 2025 to limit thermal propagation between cylindrical cells. Aspen Aerogels reported USD 168.9 million in 2025 Thermal Barrier revenue from PyroThin aerogel barriers supplied under production agreements with vehicle makers and battery-cell customers. Autoneum launched a long-fiber thermoplastic composite protection plate for electric vehicle batteries in May 2025, combining impact protection with thermal insulation. The OEM insulation market has an opportunity in designs that address cell-to-cell protection, underbody heat, and limited battery-pack space without adding excessive weight.

Volatile Polymer, Mineral Fiber, and Specialty Chemical Input Costs

Raw material volatility is a persistent constraint for the OEM insulation market. Methylene Diphenyl Diisocyanate (MDI), Toluene Diisocyanate (TDI), mineral fiber, and specialty additives affect the cost base of foam and fiber products. Supply disruptions and higher energy, logistics, and compliance costs can raise converter costs faster than contract prices can be revised. This is particularly challenging for suppliers operating under multi-year fixed-price agreements with equipment manufacturers. Margins can contract immediately, while the benefit of lower input costs takes longer to pass through the supply chain. Suppliers with diversified procurement, material flexibility, and contract protections are better positioned to manage this pressure.

Other drivers and restraints analyzed in the report include:
  • Rising Acoustic Comfort Requirements in Quieter Vehicles
  • Expansion of HVAC, Refrigeration, and Energy-Efficient Equipment Manufacturing
  • Long Qualification Cycles for New Materials and Formulations

Segment Analysis

Mineral wool held 36.52% of the OEM insulation market share in 2026, supported by its non-combustibility, wide operating temperature range, and established use in piping and equipment housings. The material remains important for industrial piping, commercial equipment, and process-plant applications where fire performance is a basic requirement. ROCKWOOL introduced its FirePro range ahead of the 2029 update to the United Kingdom fire-resistance requirements, reflecting the continued focus on tested fire-safety products. Polyurethane foam remains relevant where thermal resistance per unit thickness and molding flexibility are required, while fiberglass and glass wool serve common HVAC and appliance applications. Aerogels and ceramic-fiber composites address specialized needs for thin, high-temperature designs.

Flexible elastomeric foam is the fastest-growing material category, with the OEM insulation market size for this material projected to grow at a 6.96% CAGR through 2032. The shift toward A2L refrigerants and the increasing use of flexible materials in electric-vehicle battery modules and underbody systems support growth. Ethylene Propylene Diene Monomer (EPDM)-based formulations can help manufacturers reduce dependence on butadiene and neoprene supply chains while meeting low-smoke and halogen-free material requirements. ISO 4898:2025 for rigid cellular plastics and ASTM C1728 requirements for aerogel insulation increase the importance of certification in foam and advanced-material applications. In May 2025, E-Van introduced an electric-vehicle liner using vacuum insulation panels with a microporous core and an R-60 rating in a 2.5-inch wall to preserve cargo space and reduce HVAC energy demand, demonstrating that installation space and material performance are linked purchasing criteria.

Complete Report Scope:

  • By Material Type
    • Mineral Wool
    • Polyurethane Foam (PUF)
    • Flexible Elastomeric Foam (FEF)
    • Fiberglass and Glass Wool
    • Other Materials
  • By Insulation Type
    • Thermal Insulation
    • Acoustic Insulation
  • By End-User Industry
    • Industrial and Commercial
    • Transportation
    • Consumer Appliances and Equipment
    • Others
  • By Geography
    • Asia-Pacific
      • China
      • India
      • Japan
      • South Korea
      • ASEAN Countries
      • Rest of Asia-Pacific
    • North America
      • United States
      • Canada
      • Mexico
    • Europe
      • Germany
      • United Kingdom
      • France
      • Italy
      • NORDIC Countries
      • Russia
      • Rest of Europe
    • South America
      • Brazil
      • Argentina
      • Rest of South America
    • Middle East and Africa
      • Saudi Arabia
      • South Africa
      • Rest of Middle East and Africa

Geography Analysis

North America accounted for 33.39% of regional revenue in 2026, supported by its concentration of HVAC producers, automotive assembly plants, and industrial equipment manufacturers. The United States is the primary regional demand center, where federal and state energy standards influence factory-built products and commercial equipment. Wisconsin adopted the 2021 International Energy Conservation Code, including updated commercial thermal envelope requirements, in September 2025. ROCKWOOL broke ground on a facility in Wallula, Washington, in 2025 to serve regional industrial and OEM customers. Danfoss began production of GBC shutoff ball valves at its Monterrey facility in June 2025, reflecting Mexico's role in North American HVAC manufacturing supply chains.

Asia-Pacific is forecast to grow at a 6.39% CAGR through 2032, making it the fastest-growing region in the OEM insulation market. China combines large-scale electric vehicle production with battery safety regulations that support the use of high-performance thermal materials. India and Southeast Asia contribute to demand through HVAC adoption, appliance manufacturing, cold-chain development, and data center construction. Armacell opened an aerogel insulation plant in Pune in June 2025, doubling its global aerogel manufacturing capacity. The region's expanding equipment manufacturing base supports demand for factory-installed insulation across a broad range of products.

Europe remains a closely regulated OEM insulation market, as the Construction Products Regulation, Industrial Emissions Directive, and Energy Efficiency Directive set minimum standards for thermal performance. Germany remains important for automotive applications as premium vehicle programs shift toward electrification. Saint-Gobain continued construction of a stone wool production line at its Vidalengo facility in Italy during 2025 to serve regional demand. South America is centered on Brazil and Argentina, where cold-chain logistics and commercial HVAC adoption are the key drivers of demand. The Middle East and Africa show gradual growth in industrial and commercial demand, led by Saudi Arabia and South Africa.


List of Companies Covered in this Report:

  • 3M
  • Armacell
  • Aspen Aerogels, Inc.
  • Auria Solutions
  • Autoneum
  • BASF
  • Covestro AG
  • Johns Manville
  • Kingspan Group
  • Knauf Insulation
  • Morgan Advanced Materials
  • Owens Corning
  • Recticel Insulation
  • ROCKWOOL A/S
  • Saint-Gobain

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

Table of Contents

1 Introduction
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 Research Methodology3 Executive Summary
4 Market Landscape
4.1 Market Overview
4.2 Market Drivers
4.2.1 Tightening Energy-Efficiency and Emissions Standards
4.2.2 Electrification of Vehicles and Battery Thermal Safety
4.2.3 Rising Acoustic Comfort Requirements in Quieter Vehicles
4.2.4 OEM Lightweighting and Space-Constrained Design
4.2.5 Expansion of HVAC, Refrigeration, and Energy-Efficient Equipment Manufacturing
4.3 Market Restraints
4.3.1 Volatile Polymer, Mineral Fiber, and Specialty Chemical Input Costs
4.3.2 Long Qualification Cycles for New Materials and Formulations
4.3.3 Fire, Smoke, Toxicity, and Environmental Compliance Burden
4.4 Value Chain Analysis
4.5 Porter’s Five Forces Analysis
4.5.1 Bargaining Power of Suppliers
4.5.2 Bargaining Power of Buyers
4.5.3 Threat of New Entrants
4.5.4 Threat of Substitutes
4.5.5 Competitive Rivalry
5 Market Size and Growth Forecasts (Value)
5.1 By Material Type
5.1.1 Mineral Wool
5.1.2 Polyurethane Foam (PUF)
5.1.3 Flexible Elastomeric Foam (FEF)
5.1.4 Fiberglass and Glass Wool
5.1.5 Other Materials
5.2 By Insulation Type
5.2.1 Thermal Insulation
5.2.2 Acoustic Insulation
5.3 By End-User Industry
5.3.1 Industrial and Commercial
5.3.2 Transportation
5.3.3 Consumer Appliances and Equipment
5.3.4 Others
5.4 By Geography
5.4.1 Asia-Pacific
5.4.1.1 China
5.4.1.2 India
5.4.1.3 Japan
5.4.1.4 South Korea
5.4.1.5 ASEAN Countries
5.4.1.6 Rest of Asia-Pacific
5.4.2 North America
5.4.2.1 United States
5.4.2.2 Canada
5.4.2.3 Mexico
5.4.3 Europe
5.4.3.1 Germany
5.4.3.2 United Kingdom
5.4.3.3 France
5.4.3.4 Italy
5.4.3.5 NORDIC Countries
5.4.3.6 Russia
5.4.3.7 Rest of Europe
5.4.4 South America
5.4.4.1 Brazil
5.4.4.2 Argentina
5.4.4.3 Rest of South America
5.4.5 Middle East and Africa
5.4.5.1 Saudi Arabia
5.4.5.2 South Africa
5.4.5.3 Rest of Middle East and Africa
6 Competitive Landscape
6.1 Market Concentration
6.2 Strategic Moves
6.3 Market Share (%)/Ranking Analysis
6.4 Company Profiles (includes Global Overview, Market Overview, Core Segments, Financials as available, Strategic Information, Products and Services, and Recent Developments)
6.4.1 3M
6.4.2 Armacell
6.4.3 Aspen Aerogels, Inc.
6.4.4 Auria Solutions
6.4.5 Autoneum
6.4.6 BASF
6.4.7 Covestro AG
6.4.8 Johns Manville
6.4.9 Kingspan Group
6.4.10 Knauf Insulation
6.4.11 Morgan Advanced Materials
6.4.12 Owens Corning
6.4.13 Recticel Insulation
6.4.14 ROCKWOOL A/S
6.4.15 Saint-Gobain
7 Market Opportunities and Future Outlook
7.1 White-Space and Unmet-Need Assessment

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • 3M
  • Armacell
  • Aspen Aerogels, Inc.
  • Auria Solutions
  • Autoneum
  • BASF
  • Covestro AG
  • Johns Manville
  • Kingspan Group
  • Knauf Insulation
  • Morgan Advanced Materials
  • Owens Corning
  • Recticel Insulation
  • ROCKWOOL A/S
  • Saint-Gobain