Global Spray Pyrolysis Market Trends and Insights
Expansion of Thin-Film Solar and Perovskite Manufacturing
Perovskite photovoltaic production is moving from research projects toward commercial manufacturing candidates. The spray pyrolysis market benefits because open-air deposition can remove vacuum steps that constrain module throughput. A 2025 Matter study found that replacing vacuum thermal evaporation for electron-transport layers with open-air ultrasonic spray deposition reduced manufacturing costs by 26% in a 100 MW in-line perovskite module plant. The same study reported champion power-conversion efficiency of 20.3% in inverted device structures. Research presented at the 2025 IEEE Photovoltaic Specialists Conference projected a levelized cost of energy below USD 0.03/kWh for spray-manufactured perovskite modules at 10-15-year module lifetimes. Early pilot-line qualifications can, therefore, favor suppliers that demonstrate stable recipes before plant designs become fixed.Battery-Material Scale-Up and EV Energy-Storage Demand
The spray pyrolysis market is gaining relevance in the production of nickel-rich cathode materials. Spray pyrolysis can provide a continuous route for single-crystal cathode powders and can avoid some multi-step, solvent-intensive precursor work. A June 2025 study reported that spray-pyrolysis-synthesized NCM90 achieved an initial discharge capacity of 225.7 mAh g⁻¹ and retained 84.5% capacity after 50 cycles. Tianjin University published a dedicated system design for nickel-rich cathode manufacturing in August 2025, signaling a shift toward equipment tailored to battery production conditions. Flame spray processing also supports work on Li-Mn-rich and Li-excess disordered rocksalt cathodes for larger stationary storage applications. This gives the spray pyrolysis market exposure to both electric vehicle and utility-scale battery demand.Competition from CVD, ALD, Sputtering, and Sol-Gel Routes
The spray pyrolysis market operates alongside established CVD, ALD, sputtering, and sol-gel processes. These methods retain clear advantages in semiconductor applications that require conformal coatings on high-aspect-ratio features. ALD is particularly important for structures that depend on atomic-scale thickness control and consistent step coverage. Qualified production processes are difficult to replace because a change in deposition route requires time, testing, and new validation. That qualification burden can outweigh expected cost savings even where spray pyrolysis is technically suitable. The technology is, therefore, more likely to complement incumbent methods in selected uses than replace them across advanced chip fabrication.Other drivers and restraints analyzed in the report include:
- Semiconductor and Optoelectronic Coating Complexity
- Government Funding for Domestic Advanced-Materials Capacity
- Process-Control Sensitivity and Reproducibility Risk
Segment Analysis
Ultrasonic spray pyrolysis systems held 40.53% of the spray pyrolysis market size in 2026 and are projected to advance at a 7.93% CAGR through 2032. The combination of leading share and leading growth points to broader demand for ultrasonic systems rather than substitution by another device type. High-frequency transducers create narrower droplet distributions, which can support film uniformity and lower precursor waste. Reported droplet sizes range from 18-80 µm, providing control needed in coating processes. A 2025 study showed that Bayesian optimization can reduce the experimental cycles needed to refine ultrasonic spray parameters.High-throughput spray pyrolysis systems use multi-nozzle arrangements for larger substrate formats and can support perovskite and battery-material scale-up. Flame-assisted spray pyrolysis systems serve continuous powder and nanoparticle production, including catalyst and cathode-material work. Vacuum spray pyrolysis systems address applications where atmospheric contamination is unsuitable, but a full CVD installation is not required. Other configurations include hybrid and custom equipment designed around nonstandard substrate geometry or temperature profiles. The spray pyrolysis industry includes suppliers that differentiate through atomization control, automation, thermal management, and application engineering.
Complete Report Scope:
- By Device Type
- Ultrasonic Spray Pyrolysis System
- High-Throughput Spray Pyrolysis System
- Flame-Assisted Spray Pyrolysis System
- Vacuum Spray Pyrolysis System
- Other Device Types
- By Application
- Thin and Thick Film Deposition
- Nanoparticle Synthesis
- Powder Production
- Industrial and Functional Coatings
- Other Applications
- By End-Use Industry
- Electronics and Semiconductors
- Energy and Utilities
- Pharmaceuticals and Biotechnology
- Chemicals and Petrochemicals
- Other End-Use Industries
- By Geography
- Asia-Pacific
- China
- India
- Japan
- South Korea
- ASEAN Countries
- Rest of Asia-Pacific
- North America
- United States
- Canada
- Mexico
- Europe
- Germany
- United Kingdom
- France
- Italy
- NORDIC Countries
- Rest of Europe
- South America
- Brazil
- Argentina
- Rest of South America
- Middle East and Africa
- Saudi Arabia
- South Africa
- Rest of Middle East and Africa
- Asia-Pacific
Geography Analysis
Asia-Pacific held 35.17% of the spray pyrolysis market share in 2026 and is projected to advance at an 8.12% CAGR through 2032. China’s battery and solar manufacturing expansion supports equipment demand for cathode materials and thin films. Tianjin University’s work on a dedicated system for nickel-rich cathodes reflects the region’s focus on production-oriented equipment development. South Korea and Japan provide electronics and display manufacturing ecosystems that need functional coating processes. India is developing capacity in scientific instruments and thin-film equipment, with Holmarc Opto-Mechatronics Ltd. and Navson Technologies Pvt. Ltd. active in the domestic supply chain.North America is supported by semiconductor, clean-energy, pharmaceutical, and advanced-material manufacturing. The New York State Microelectronics Innovation Challenge connected ultrasonic spray coating work to 300 mm silicon wafer applications. Government funding for aerospace materials manufacturing can also support related coating and deposition infrastructure. Canada adds a specialty channel through its nano-coating partnership with MDS Coating Technologies Corporation. Europe is supported by perovskite development and expanding domestic battery-cell production under Regulation (EU) 2023/1542.
South America remains centered on academic and research-institute procurement, with Brazil and Argentina representing identified demand locations. Saudi Arabia and South Africa support demand in the Middle East and Africa through energy-diversification programs and renewable manufacturing initiatives. These regions primarily purchase laboratory and pilot-scale systems rather than high-throughput platforms. The spray pyrolysis market has a longer-term opportunity as local manufacturing capacity and project pipelines develop.
List of Companies Covered in this Report:
- Acmefil Engineering Systems Pvt. Ltd.
- Beneq
- Cheersonic Ultrasonic Equipments Co., Ltd.
- HANSUN ELECTRIC TECHNOLOGY CO., LIMITED
- Hielscher Ultrasonics GmbH
- Holmarc Opto-Mechatronics Ltd.
- Kurt J. Lesker Company
- MTI Corporation
- Navson Technologies Pvt. Ltd.
- Plasma-Therm LLC
- Shanghai Huashuo Intelligent Equipment Co., Ltd.
- Siansonic
- Sono-Tek Corporation
- ULVAC, Inc.
- Zhengzhou CY Scientific Instrument Co., Ltd.
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- Acmefil Engineering Systems Pvt. Ltd.
- Beneq
- Cheersonic Ultrasonic Equipments Co., Ltd.
- HANSUN ELECTRIC TECHNOLOGY CO., LIMITED
- Hielscher Ultrasonics GmbH
- Holmarc Opto-Mechatronics Ltd.
- Kurt J. Lesker Company
- MTI Corporation
- Navson Technologies Pvt. Ltd.
- Plasma-Therm LLC
- Shanghai Huashuo Intelligent Equipment Co., Ltd.
- Siansonic
- Sono-Tek Corporation
- ULVAC, Inc.
- Zhengzhou CY Scientific Instrument Co., Ltd.

