+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

GaN Power Device - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026-2031)

  • PDF Icon

    Report

  • 110 Pages
  • October 2026
  • Region: Global
  • Mordor Intelligence
  • ID: 6292685
The GaN power device market size is projected to be USD 0.6 billion in 2025, USD 0.77 billion in 2026, and reach USD 3.83 billion by 2031, at a CAGR of 37.83% from 2026 to 2031. This report is Segmented by Device Type (GaN Power Discrete Devices, Gan Power ICs, and Others), Voltage Range (Below 200 V and More), Operation Mode (Enhancement-Mode, and More), End-Use Industry (Consumer Electronics, Automotive, and Others), and Geography (North America, Europe, Asia-Pacific, South America, Middle East and Africa). The Market Forecasts are Provided in Terms of Value (USD).

Global GaN Power Device Market Trends and Insights

AI Data-Center Power Demand And High-Voltage DC Architectures

The move toward 800 V high-voltage DC architectures is increasing the relevance of the GaN power device market in AI training and inference infrastructure. Onsemi stated in June 2026 that power and cooling can account for as much as 40% of hyperscale data-center operating expenses, so small efficiency improvements can have material operating effects at large loads. GaN supports high-density conversion in 800 V-to-48 V and 48 V intermediate-bus stages, where switching speed and lower losses can reduce equipment and cooling demands. Navitas has worked with NVIDIA on 800 V HVDC power architectures for IT racks of 1 MW and above, placing GaN and SiC technologies within the applicable power-conversion architecture.This work shifts the discussion from a component replacement toward system design, where design support and qualified supply carry more weight. The GaN power device market can benefit as hyperscalers qualify these architectures and suppliers convert design activity into production orders.

Electrification And Higher Power Density In EV Charging

Electric vehicle on-board chargers require compact designs that can handle rising power ratings, which supports the GaN power device market. Navitas reported in April 2025 that its high-power GaNSafe ICs achieved AEC-Q 100 and AEC-Q 101 qualification after more than 7 years of production data, more than 250 million units shipped, and field failure rates approaching 100 parts per billion across more than 2 trillion device-hours. Changan Automobile brought a GaN-based on-board charger using GaNSafe technology into commercial production, with production ramping during 2026. The shift from 6.6 kW chargers toward 11 kW and 22 kW systems can increase the number of power switches used in each vehicle. This raises GaN content per vehicle in addition to growth in electric vehicle volume. The GaN power device market, therefore, depends on both vehicle platform adoption and the power rating selected for each charger.

Higher Manufacturing And Qualification Cost Versus Silicon

Higher manufacturing and qualification costs limit adoption in price-sensitive areas of the GaN power device market. GaN wafer costs were stated to be 3x-5x above comparable silicon devices because GaN-on-silicon epitaxy adds process steps and defect-management requirements. Automotive parts also require AEC-Q101 stress testing, power-cycle testing, and extended accelerated lifetime testing. These activities can add 12 - 18 months to a design cycle, even where the underlying process is mature. Suppliers with qualified products gain an entry advantage, but the same qualification burden can slow new product introductions. Expansion of 8-inch GaN-on-silicon production in Asian fabs is expected to lower device costs before 2028, although that does not remove the need for system-level validation.

Other drivers and restraints analyzed in the report include:
  • Fast-Charging And Compact Consumer Power Supplies
  • Energy-Efficiency Regulation And Lower System Losses
  • Gallium, Wafer, And Epitaxy Supply Concentration

Segment Analysis

GaN power discrete devices held 42.4% of the GaN power device market share in 2025. They provide a direct route for engineers replacing silicon MOSFETs in existing circuit designs without changing the broader control architecture. GaN HEMTs, GaN FETs, and GaN Schottky diodes cover a wide range of voltage and application needs. Their position is supported by accumulated application data and established familiarity among power-system designers. GaN power modules represent the smallest device category and serve higher-power industrial and renewable-energy inverter applications. They can simplify assembly and thermal management by integrating several transistors into a packaged solution.

GaN power ICs are forecast to grow at a 38.1% CAGR through 2031 within the GaN power device market. Designers of AI data centers and electric vehicle chargers are seeking fewer components, lower EMI design effort, and smaller circuit boards. An integrated IC can combine a transistor stage with gate drive, protection, and sensing functions. Navitas released production 650 V bidirectional GaNFast ICs in March 2025 for single-stage AC-DC and AC-AC conversion. Onsemi introduced GaNEXUS Smart FETs with integrated protection features in June 2026. EPC’s February 2026 licensing and second-sourcing agreement with Renesas for low-voltage eGaN technology broadened access to that technology for relevant applications.

The 200-600 V range accounted for 46.4% of GaN power device market revenue in 2025. This range serves consumer USB-PD chargers that use 650V GaN FETs, server power supplies with a 400V input bus, and Level 1 and Level 2 vehicle on-board chargers. It has the longest production history among the listed voltage ranges. The segment also has broad component availability and a mature ecosystem of gate drivers and control ICs. Below-200 V products serve AI-server 48 V intermediate-bus conversion, LiDAR power supplies, and automotive Class-D audio amplifiers. These applications are individually smaller, but their needs align with fast switching and compact power conversion.

The 601-1,200 V range is forecast to grow at a 38.6% CAGR through 2031. This range supports bidirectional chargers in 800 V electric vehicle platforms, high-voltage AC-DC front ends for AI power shelves, and solar microinverters. In those applications, a single GaN switching stage can replace some two-stage silicon solutions. Infineon introduced 650 V CoolGaN HEMTs for higher-power-density electric vehicle charger architectures in 2024. Products above 1,200 V remain at an early stage for GaN power conversion. They are drawing research interest for grid-tied and high-reliability industrial systems, where thermal requirements remain important.

Complete Report Scope:

  • By Device Type
    • GaN Power Discrete Devices
    • GaN Power ICs
    • GaN Power Modules
    • GaN HEMTs
    • GaN FETs
    • GaN Schottky Diodes
    • Other GaN Power Devices
  • By Voltage Range
    • Below 200 V
    • 200 - 600 V
    • 601 - 1,200 V
    • Above 1,200 V
  • By Operation Mode
    • Enhancement-Mode
    • Depletion-Mode
    • Cascode Configuration
  • By End-Use Industry
    • Consumer Electronics
    • Automotive
    • IT and Data Centers
    • Telecommunications
    • Industrial
    • Renewable Energy
    • Aerospace and Defense
    • Military
    • Healthcare and Medical
    • Other Industries
  • By Geography
    • North America
      • United States
      • Canada
      • Mexico
    • Europe
      • Germany
      • France
      • Italy
      • Spain
      • United Kingdom
      • Poland
      • Russia
      • Rest of Europe
    • Asia-Pacific
      • China
      • India
      • Japan
      • South Korea
      • Australia
      • Indonesia
      • Vietnam
      • Thailand
      • Rest of Asia-Pacific
    • South America
      • Brazil
      • Argentina
      • Chile
      • Rest of South America
    • Middle East and Africa
      • Saudi Arabia
      • United Arab Emirates
      • Egypt
      • South Africa
      • Morocco
      • Rest of Middle East and Africa

Geography Analysis

Asia-Pacific held 36.9% of global revenue in 2025 and is forecast to grow at a 39.4% CAGR through 2031. The region’s consumer-electronics production base supports process maturity and yield improvement that can lower costs for automotive and industrial products. China’s gallium position also connects regional production strength with a supply risk faced by the global GaN power device market. North America has a strong demand base in AI data centers, where hyperscalers are qualifying 650 V and below-200 V devices for power conversion. U.S. investments in gallium recovery and domestic manufacturing reflect concern over supply resilience. Europe has a strong automotive supplier base, with Germany playing a central role in vehicle power electronics. Infineon’s 300mm power GaN pilot production in Villach, Austria, announced in September 2024, aims to use established silicon manufacturing infrastructure for GaN scale-up.

EU ecodesign requirements support the European distribution of efficient consumer and industrial chargers. South America, the Middle East, Africa, and smaller APAC markets are adopting GaN products as lower costs improve access to fast chargers and power infrastructure. Brazil offers entry opportunities through electric vehicle charging and consumer-electronics supply chains. Saudi Arabia and the United Arab Emirates have longer-term potential linked to planned data-center capacity for sovereign AI programs. India is building domestic design capability through Cyient Semiconductors’ May 2026 launch of 7 650 V GaN power ICs developed with Navitas technology.


List of Companies Covered in this Report:

  • Cambridge GaN Devices Ltd.
  • Efficient Power Conversion Corporation
  • Infineon Technologies AG
  • Innoscience Technology
  • MACOM Technology Solutions Inc.
  • Navitas Semiconductor Corporation
  • Nexperia B.V.
  • onsemi
  • Panasonic Industry Co., Ltd.
  • Power Integrations, Inc.
  • Qorvo, Inc.
  • Renesas Electronics Corporation
  • ROHM Co., Ltd.
  • STMicroelectronics N.V.
  • Texas Instruments Incorporated
  • Transphorm, Inc.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

Table of Contents

1 INTRODUCTION
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 RESEARCH METHODOLOGY3 EXECUTIVE SUMMARY
4 MARKET LANDSCAPE
4.1 Market Overview
4.2 Market Drivers
4.2.1 Electrification and Higher Power Density in EV Charging
4.2.2 AI Data-Center Power Demand and High-Voltage DC Architectures
4.2.3 Fast-Charging and Compact Consumer Power Supplies
4.2.4 Energy-Efficiency Regulation and Lower System Losses
4.2.5 5G, Radar, and High-Frequency RF Infrastructure
4.2.6 Design Migration to Integrated GaN Power Platforms
4.3 Market Restraints
4.3.1 Higher Manufacturing and Qualification Cost Versus Silicon
4.3.2 Reliability, EMI, and Automotive Qualification Timelines
4.3.3 Gallium, Wafer, and Epitaxy Supply Concentration
4.3.4 ASP Erosion and Competition From SiC and Advanced Silicon
4.4 Supply-Chain Analysis
4.5 Porter's Five Forces Analysis
4.5.1 Bargaining Power of Suppliers
4.5.2 Bargaining Power of Buyers
4.5.3 Threat of New Entrants
4.5.4 Threat of Substitutes
4.5.5 Competitive Rivalry
4.6 Technology Outlook
4.7 Regulatory Landscape
4.8 Investment Analysis
5 MARKET SIZE AND GROWTH FORECASTS
5.1 By Device Type
5.1.1 GaN Power Discrete Devices
5.1.2 GaN Power ICs
5.1.3 GaN Power Modules
5.1.4 GaN HEMTs
5.1.5 GaN FETs
5.1.6 GaN Schottky Diodes
5.1.7 Other GaN Power Devices
5.2 By Voltage Range
5.2.1 Below 200 V
5.2.2 200 - 600 V
5.2.3 601 - 1,200 V
5.2.4 Above 1,200 V
5.3 By Operation Mode
5.3.1 Enhancement-Mode
5.3.2 Depletion-Mode
5.3.3 Cascode Configuration
5.4 By End-Use Industry
5.4.1 Consumer Electronics
5.4.2 Automotive
5.4.3 IT and Data Centers
5.4.4 Telecommunications
5.4.5 Industrial
5.4.6 Renewable Energy
5.4.7 Aerospace and Defense
5.4.8 Military
5.4.9 Healthcare and Medical
5.4.10 Other Industries
5.5 By Geography
5.5.1 North America
5.5.1.1 United States
5.5.1.2 Canada
5.5.1.3 Mexico
5.5.2 Europe
5.5.2.1 Germany
5.5.2.2 France
5.5.2.3 Italy
5.5.2.4 Spain
5.5.2.5 United Kingdom
5.5.2.6 Poland
5.5.2.7 Russia
5.5.2.8 Rest of Europe
5.5.3 Asia-Pacific
5.5.3.1 China
5.5.3.2 India
5.5.3.3 Japan
5.5.3.4 South Korea
5.5.3.5 Australia
5.5.3.6 Indonesia
5.5.3.7 Vietnam
5.5.3.8 Thailand
5.5.3.9 Rest of Asia-Pacific
5.5.4 South America
5.5.4.1 Brazil
5.5.4.2 Argentina
5.5.4.3 Chile
5.5.4.4 Rest of South America
5.5.5 Middle East and Africa
5.5.5.1 Saudi Arabia
5.5.5.2 United Arab Emirates
5.5.5.3 Egypt
5.5.5.4 South Africa
5.5.5.5 Morocco
5.5.5.6 Rest of Middle East and Africa
6 COMPETITIVE LANDSCAPE
6.1 Market Concentration
6.2 Strategic Moves
6.3 Market Share Analysis
6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)
6.4.1 Cambridge GaN Devices Ltd.
6.4.2 Efficient Power Conversion Corporation
6.4.3 Infineon Technologies AG
6.4.4 Innoscience Technology
6.4.5 MACOM Technology Solutions Inc.
6.4.6 Navitas Semiconductor Corporation
6.4.7 Nexperia B.V.
6.4.8 onsemi
6.4.9 Panasonic Industry Co., Ltd.
6.4.10 Power Integrations, Inc.
6.4.11 Qorvo, Inc.
6.4.12 Renesas Electronics Corporation
6.4.13 ROHM Co., Ltd.
6.4.14 STMicroelectronics N.V.
6.4.15 Texas Instruments Incorporated
6.4.16 Transphorm, Inc.
7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK
7.1 White-Space and Unmet-Need Assessment

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • Cambridge GaN Devices Ltd.
  • Efficient Power Conversion Corporation
  • Infineon Technologies AG
  • Innoscience Technology
  • MACOM Technology Solutions Inc.
  • Navitas Semiconductor Corporation
  • Nexperia B.V.
  • onsemi
  • Panasonic Industry Co., Ltd.
  • Power Integrations, Inc.
  • Qorvo, Inc.
  • Renesas Electronics Corporation
  • ROHM Co., Ltd.
  • STMicroelectronics N.V.
  • Texas Instruments Incorporated
  • Transphorm, Inc.