North America Industrial Asset Inspection Services Market Trends and Insights
Aging Pipelines, Bridges, Power Assets, and Industrial Plants
As fixed industrial assets age, deferred renewals are turning into required inspections across the North America industrial asset inspection services market. The 2025 ASCE report found that 70% of power transformers were at least 25 years old, 60% of circuit breakers were at least 30 years old, and 70% of transmission lines were at least 25 years old. ASCE assigned the United States energy sector a D+ grade in 2025, compared with a C- grade in 2021. The same assessment placed bridge rehabilitation needs at USD 191.3 billion, and replacement needs for structurally poor bridges at USD 69.7 billion. Assets rated in fair condition are particularly important because assessment can help identify deterioration before replacement becomes necessary. This supports ongoing contracts in the North America industrial asset inspection services market for infrastructure operators and industrial owners.OSHA, PHMSA, FAA, Transport Canada, and Provincial Compliance Requirements
Regulatory requirements give the North America industrial asset inspection services market a base level of work that is less exposed to commodity price changes. OSHA requires covered facilities to inspect and test process equipment under recognized and generally accepted good engineering practices. This framework applies to mechanical integrity programs for pressure vessels, piping, storage tanks, and related equipment. PHMSA introduced a final rule on gas pipeline leak detection and repair in January 2025, including performance-based programs, leak grading criteria, and repair deadlines. PHMSA also incorporated 19 revised technical standards into pipeline safety regulations through its 2025 Periodic Standards Update II. In Canada, the regulator’s 2025 audit of Enbridge Pipelines illustrates continuing oversight of facility integrity management. These rules support renewal-oriented service agreements in the North America industrial asset inspection services market because operators must document compliance over time.Shortage and Retirement of Certified NDT Personnel
The supply of certified personnel remains a structural limitation for the North America industrial asset inspection services market. ASNT reported that 30% of certified nondestructive testing professionals worldwide were over 55 years old. The organization also identified fewer than 1,200 senior Level III trainers supporting an estimated 150,000 certified professionals globally. This training structure takes time to expand because certification depends on supervised experience and qualified instruction. Staffing shortages are more difficult at remote, offshore, and turnaround sites where scheduling is less flexible. North America industrial asset inspection services market providers may therefore limit project selection when technician availability cannot match client timing. Different certification requirements across jurisdictions can further limit the movement of qualified workers during periods of high demand.Other drivers and restraints analyzed in the report include:
- Shift Toward Risk-Based and Condition-Based Inspection, Remote Inspection, NDT 4.0, and Digital Reporting Adoption
- Aircraft Fleet Expansion, Longer Asset Service Lives, and Mexico Modernization
- High Cost of Advanced Equipment, Calibration, and Software
Segment Analysis
Pipelines and piping systems held 24.0% of the North America industrial asset inspection services market share in 2026. Their position reflects the inspection requirements surrounding oil, gas, chemical, and industrial transmission corridors. Federal pipeline integrity requirements support recurring assessment work in high-consequence areas. Inline inspection, cathodic protection assessment, and fitness-for-service work remain important under this framework. Pressure vessels, boilers, and heat exchangers form another large service base because process facilities require mechanical-integrity programs. Storage tanks also require continuing attention as operators assess corrosion, containment, and operating conditions. Together, these categories support regular work that is linked to inspection cycles, shutdowns, and documented compliance.Electrical and power equipment is forecast to expand at a 9.0% CAGR through 2032. This North America industrial asset inspection services market size for electrical equipment is supported by grid rehabilitation and commissioning of new energy assets. FirstEnergy completed aerial infrared and ultraviolet patrols across nearly 5,000 miles of high-voltage lines in 2025. The program shows how utilities can make inspection a planned operating activity rather than a response to failure. Rotating equipment and industrial structures provide steadier demand across manufacturing and process sites. Rope access and robotic methods are gaining use in these categories because they can reduce confined-space exposure and disruption to operations. OSHA documentation requirements maintain a broad inspection base across equipment categories at the facilities covered.
Complete Report Scope:
- By Asset Type
- Pipelines and Piping Systems
- Oil, Gas and Industrial Transmission Pipelines
- Process Piping and Industrial Utility Piping
- Offshore Pipelines, Risers and Flowlines
- Pressure Vessels, Boilers and Heat Exchangers
- Pressure Vessels and Process Reactors
- Industrial Boilers and Steam Systems
- Heat Exchangers and Pressurized Thermal Equipment
- Storage Tanks and Containment Systems
- Aboveground and Underground Industrial Storage Tanks
- Industrial Containment and Bulk Storage Systems
- Rotating and Mechanical Equipment
- Pumps, Compressors and Industrial Turbines
- Conveyors, Drives and Fixed Production Machinery
- Other Installed Mechanical Equipment
- Electrical and Power Equipment
- Transformers, Switchgear and Power Distribution Equipment
- Generators and Electrical Installations
- Power Transmission and Electrical Utility Assets
- Industrial Structures and Fixed Installations
- Industrial Structural Steel and Equipment Supports
- Offshore Platforms and Fixed Energy Installations
- Industrial Towers, Stacks and Supporting Structures
- Other Fixed Industrial Assets
- Process Furnaces and Refractory Systems
- Industrial Instrumentation and Control Installations
- Other Specialized Installed Industrial Assets
- Pipelines and Piping Systems
- By End-Use Industry
- Oil and Gas, Refining and Petrochemicals
- Power Generation, Renewable Energy and Electrical Utilities
- Chemical Manufacturing (Excluding Petrochemicals)
- Metals and Other Industrial Manufacturing
- Mining and Mineral Processing
- Water and Wastewater Utilities
- Food and Beverage Processing
- Pharmaceuticals and Bioprocessing
- Transportation, Logistics and Port Operations
- Other Industrial End Users
- By Geography
- United States
- Canada
- Mexico
List of Companies Covered in this Report:
- SGS SA
- Bureau Veritas SA
- Baker Hughes Company
- Applus+
- MISTRAS Group, Inc.
- Intertek Group plc
- Acuren
- TEAM, Inc.
- Wabtec Corporation
- Ashtead Technology
- FPrimeC Solutions Inc.
- Eddyfi Technologies
- Applied Technical Services
- Industrial Inspection & Analysis, Inc.
- IRISNDT
- Jesse Garant Metrology Center
- Giatec Scientific Inc.
- Magnaflux
- Evident Corporation
- Waygate Technologies
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- SGS SA
- Bureau Veritas SA
- Baker Hughes Company
- Applus+
- MISTRAS Group, Inc.
- Intertek Group plc
- Acuren
- TEAM, Inc.
- Wabtec Corporation
- Ashtead Technology
- FPrimeC Solutions Inc.
- Eddyfi Technologies
- Applied Technical Services
- Industrial Inspection & Analysis, Inc.
- IRISNDT
- Jesse Garant Metrology Center
- Giatec Scientific Inc.
- Magnaflux
- Evident Corporation
- Waygate Technologies

