+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

Asia-Pacific Industrial Asset Inspection Services - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026-2032)

  • PDF Icon

    Report

  • 150 Pages
  • October 2026
  • Region: Asia Pacific
  • Mordor Intelligence
  • ID: 6292786
The Asia-Pacific industrial asset inspection services market size is projected to expand from USD 14.56 billion in 2026 and USD 15.58 billion in 2027 to USD 22.89 billion by 2032, registering a CAGR of 8% between 2027 and 2032. This report is Segmented by Asset Type (Pipelines and Piping Systems, Pressure Vessels, Boilers and Heat Exchangers, and More), by End-Use Industry (Oil and Gas, Refining and Petrochemicals, Mining and Mineral Processing, Water and Wastewater Utilities, and More), and by Geography (China, Japan, India, and More). The Market Forecasts are Provided in Terms of Value (USD).

Asia-Pacific Industrial Asset Inspection Services Market Trends and Insights

Accelerating Industrial Infrastructure and Energy Investment

Energy and industrial capital programs remain the main source of new inspection demand across the region. Global energy investment is expected to reach USD 3.3 trillion in 2025, and China is the largest national investor in this cycle. Southeast Asia’s clean energy investment reached USD 47 billion in 2025, compared with USD 30 billion in 2015. New wind farms, solar facilities, substations, pipelines, LNG trains, and industrial plants create work before start-up and during operation. The Asia-Pacific industrial asset inspection services market therefore gains from the volume of assets entering regulated inspection cycles after commissioning. China also began construction on nearly 100 gigawatts of coal-fired capacity in 2024, adding to the inspection base alongside renewable and grid investment.

Stricter Safety, Quality, and Regulatory Compliance Requirements

For the Asia-Pacific industrial asset inspection services market, regulatory changes are raising the minimum level of asset integrity work required from industrial owners. Malaysia’s Special Scheme of Inspection Regulations 2025 were launched by PETRONAS and the Department of Occupational Safety and Health in August 2025. The rules replace the earlier 2014 risk-based inspection framework with a broader approach to asset integrity and safety management. This change supports continuous assessment of high-risk equipment rather than relying only on fixed inspection dates. The Asia-Pacific industrial asset inspection services market has a more stable compliance base when inspection is linked to certification and operating approval. Australia’s revised Model Work Health and Safety Regulations also maintain equipment validation and safety obligations for major hazard facilities.

Shortage of Certified Level II and Level III Inspection Personnel

The supply of qualified personnel limits the ability of providers to meet demand across expanding industrial asset portfolios. The American Society for Nondestructive Testing reported that there are nearly 150,000 certified NDT professionals worldwide and fewer than 1,200 senior Level III trainers. The same work states that 47% of certified technicians require further skill bridging after formal qualification. It also links skill gaps to 15%-20% of delays in inspection-dependent projects. Regional training is expanding through programs aligned with ISO 9712, but the pace remains uneven across emerging markets. The Asia-Pacific industrial asset inspection services market faces a capacity constraint when operators need qualified people faster than training systems can produce them.

Other drivers and restraints analyzed in the report include:
  • Expansion of Outsourced Inspection and Risk-Based Maintenance
  • Industry 4.0, AI, and Automated Inspection Adoption
  • High Cost of Advanced Inspection Equipment and Digital Integration

Segment Analysis

Pipelines and piping systems accounted for 24% of the Asia-Pacific industrial asset inspection services market share in 2026, reflecting the region’s large oil, gas, water, chemical, and industrial pipeline networks. Operators require corrosion monitoring, intelligent pigging, integrity assessment, and risk-based planning across these systems because pressure equipment and pipeline safety frameworks support recurring inspection requirements. Pressure vessels, boilers, and heat exchangers also generate material demand across refining, petrochemicals, power generation, and heavy manufacturing, where safety verification is essential. Storage tanks and containment systems require inspection as refineries and chemical operators address containment and environmental obligations, while rotating and mechanical equipment adds work through pumps, compressors, turbines, and related systems.

Electrical and power equipment is projected to grow at a 9.5% CAGR from 2027 to 2032, making it the fastest-growing asset type in the Asia-Pacific industrial asset inspection services market. Grid modernization, renewable commissioning, and higher electricity demand raise inspection needs for substations, transformers, switchgear, generation equipment, and related fixed infrastructure. South Korea’s 2025 certification of an AI-based diagnostic solution indicates the growing role of automated analysis in complex equipment. Industrial structures and fixed installations are gaining attention as offshore platforms, structural steel, and industrial towers operate beyond original design periods. At the same time, furnaces, refractory systems, instrumentation, and other specialized assets can command higher value where expertise or difficult access is required.

Complete Report Scope:

  • By Asset Type
    • Pipelines and Piping Systems
      • Oil, Gas and Industrial Transmission Pipelines
      • Process Piping and Industrial Utility Piping
      • Offshore Pipelines, Risers and Flowlines
    • Pressure Vessels, Boilers and Heat Exchangers
      • Pressure Vessels and Process Reactors
      • Industrial Boilers and Steam Systems
      • Heat Exchangers and Pressurized Thermal Equipment
    • Storage Tanks and Containment Systems
      • Aboveground and Underground Industrial Storage Tanks
      • Industrial Containment and Bulk Storage Systems
    • Rotating and Mechanical Equipment
      • Pumps, Compressors and Industrial Turbines
      • Conveyors, Drives and Fixed Production Machinery
      • Other Installed Mechanical Equipment
    • Electrical and Power Equipment
      • Transformers, Switchgear and Power Distribution Equipment
      • Generators and Electrical Installations
      • Power Transmission and Electrical Utility Assets
    • Industrial Structures and Fixed Installations
      • Industrial Structural Steel and Equipment Supports
      • Offshore Platforms and Fixed Energy Installations
      • Industrial Towers, Stacks and Supporting Structures
    • Other Fixed Industrial Assets
      • Process Furnaces and Refractory Systems
      • Industrial Instrumentation and Control Installations
      • Other Specialized Installed Industrial Assets
  • By End-Use Industry
    • Oil and Gas, Refining and Petrochemicals
    • Power Generation, Renewable Energy and Electrical Utilities
    • Chemical Manufacturing (Excluding Petrochemicals)
    • Metals and Other Industrial Manufacturing
    • Mining and Mineral Processing
    • Water and Wastewater Utilities
    • Food and Beverage Processing
    • Pharmaceuticals and Bioprocessing
    • Transportation, Logistics and Port Operations
    • Other Industrial End Users
  • By Geography
    • China
    • Japan
    • India
    • South Korea
    • Taiwan
    • Australia
    • ASEAN Region
    • Rest of Asia-Pacific

List of Companies Covered in this Report:

  • SGS Société Générale de Surveillance SA
  • Bureau Veritas SA
  • Intertek Group plc
  • Applus Services SA
  • TÜV Rheinland AG
  • TÜV SÜD AG
  • DNV AS
  • DEKRA SE
  • TÜV NORD AG
  • UL Solutions Inc.
  • MISTRAS Group, Inc.
  • Baker Hughes Company
  • Evident Corporation
  • Eurofins Scientific SE
  • ALS Limited
  • Lloyd's Register Group Limited
  • QIMA Limited
  • Centre Testing International Group Co., Ltd.
  • China Certification and Inspection Group
  • Japan Quality Assurance Organization

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

Table of Contents

1 Introduction
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 Research Methodology3 Executive Summary
4 Market Landscape
4.1 Market Overview
4.2 Market Drivers
4.2.1 Accelerating Industrial Infrastructure and Energy Investment
4.2.2 Stricter Safety, Quality, and Regulatory Compliance Requirements
4.2.3 Expansion of Outsourced Inspection and Risk-Based Maintenance
4.2.4 Industry 4.0, AI, and Automated Inspection Adoption
4.2.5 Cross-Border Manufacturing and Supplier-Quality Complexity
4.2.6 Remote Inspection for Hazardous, Offshore, and Hard-to-Reach Assets
4.3 Market Restraints
4.3.1 Shortage of Certified Level II and Level III Inspection Personnel
4.3.2 High Cost of Advanced Inspection Equipment and Digital Integration
4.3.3 Fragmented Accreditation and National Inspection Standards
4.3.4 Cybersecurity and Evidence-Chain Risk in Connected Inspection
4.4 Value and Supply-Chain Analysis
4.4.1 Asset Owners and Operators
4.4.2 Engineering, Procurement, and Construction Contractors
4.4.3 Inspection Service Providers
4.4.4 Equipment and Sensor Manufacturers
4.4.5 Digital Inspection Software and Data Platforms
4.4.6 Certification, Accreditation, and Regulatory Bodies
4.5 Regulatory Landscape
4.5.1 Pressure Equipment and Boiler Inspection Requirements
4.5.2 Oil and Gas Pipeline and Process Safety Requirements
4.5.3 Marine, Offshore, and Classification Requirements
4.5.4 Nuclear, Power, and Grid Asset Requirements
4.5.5 Welding, Materials, and Personnel Certification Standards
4.5.6 Data, Drone, and Remote Inspection Permissions
4.6 Technological Outlook
4.6.1 Conventional Visual and Manual Inspection Techniques
4.6.2 Ultrasonic Inspection, Phased-Array UT and Time-of-Flight Diffraction
4.6.3 Radiographic Inspection and Digital Imaging Technologies
4.6.4 Eddy-Current, Magnetic Particle and Magnetic Flux Leakage Inspection
4.6.5 Acoustic Emission and Guided-Wave Inspection
4.6.6 Thermal Imaging, Corrosion Mapping and Leak Detection
4.6.7 Intelligent Pigging and In-Line Pipeline Inspection
4.6.8 Drone, ROV, Crawler and Robotic Inspection Systems
4.6.9 AI-Based Defect Recognition and Automated Inspection Analytics
4.6.10 IoT-Enabled Monitoring and Digital Asset Integrity Platforms
4.7 Inspection Service Procurement and Commercial Models
4.7.1 Periodic Inspection versus Risk-Based Inspection Programs
4.7.2 In-Service versus Shutdown and Turnaround Inspection
4.7.3 Project-Based versus Long-Term Inspection Contracts
4.7.4 Inspection Pricing and Contract Structures
4.7.5 Multi-Site and Integrated Inspection Service Agreements
4.7.6 Inspection Frequency and Contract Renewal Dynamics
4.8 Macroeconomic and Industrial Capital-Cycle Impact
4.8.1 Impact of Industrial Capital Expenditure and Capacity Expansion
4.8.2 Impact of Oil and Gas Investment and Energy Price Cycles
4.8.3 Impact of Industrial Asset Ageing and Maintenance Expenditure
4.8.4 Impact of Energy Transition and Infrastructure Modernization
5 Market Size and Growth Forecasts
5.1 By Asset Type
5.1.1 Pipelines and Piping Systems
5.1.1.1 Oil, Gas and Industrial Transmission Pipelines
5.1.1.2 Process Piping and Industrial Utility Piping
5.1.1.3 Offshore Pipelines, Risers and Flowlines
5.1.2 Pressure Vessels, Boilers and Heat Exchangers
5.1.2.1 Pressure Vessels and Process Reactors
5.1.2.2 Industrial Boilers and Steam Systems
5.1.2.3 Heat Exchangers and Pressurized Thermal Equipment
5.1.3 Storage Tanks and Containment Systems
5.1.3.1 Aboveground and Underground Industrial Storage Tanks
5.1.3.2 Industrial Containment and Bulk Storage Systems
5.1.4 Rotating and Mechanical Equipment
5.1.4.1 Pumps, Compressors and Industrial Turbines
5.1.4.2 Conveyors, Drives and Fixed Production Machinery
5.1.4.3 Other Installed Mechanical Equipment
5.1.5 Electrical and Power Equipment
5.1.5.1 Transformers, Switchgear and Power Distribution Equipment
5.1.5.2 Generators and Electrical Installations
5.1.5.3 Power Transmission and Electrical Utility Assets
5.1.6 Industrial Structures and Fixed Installations
5.1.6.1 Industrial Structural Steel and Equipment Supports
5.1.6.2 Offshore Platforms and Fixed Energy Installations
5.1.6.3 Industrial Towers, Stacks and Supporting Structures
5.1.7 Other Fixed Industrial Assets
5.1.7.1 Process Furnaces and Refractory Systems
5.1.7.2 Industrial Instrumentation and Control Installations
5.1.7.3 Other Specialized Installed Industrial Assets
5.2 By End-Use Industry
5.2.1 Oil and Gas, Refining and Petrochemicals
5.2.2 Power Generation, Renewable Energy and Electrical Utilities
5.2.3 Chemical Manufacturing (Excluding Petrochemicals)
5.2.4 Metals and Other Industrial Manufacturing
5.2.5 Mining and Mineral Processing
5.2.6 Water and Wastewater Utilities
5.2.7 Food and Beverage Processing
5.2.8 Pharmaceuticals and Bioprocessing
5.2.9 Transportation, Logistics and Port Operations
5.2.10 Other Industrial End Users
5.3 By Geography
5.3.1 China
5.3.2 Japan
5.3.3 India
5.3.4 South Korea
5.3.5 Taiwan
5.3.6 Australia
5.3.7 ASEAN Region
5.3.8 Rest of Asia-Pacific
6 Competitive Landscape
6.1 Market Concentration
6.2 Market Share Analysis
6.3 Strategic Developments (Mergers/ Acquisitions, Expansion and Service Portfolio Diversification, Investments in Advanced NDT and Robotic Inspection)
6.4 Company Profiles (Includes Global Level Overview, Market Level Overview, Core Segments, Financials as available, Strategic Information, Products and Services, Recent Developments)
6.4.1 SGS Société Générale de Surveillance SA
6.4.2 Bureau Veritas SA
6.4.3 Intertek Group plc
6.4.4 Applus Services SA
6.4.5 TÜV Rheinland AG
6.4.6 TÜV SÜD AG
6.4.7 DNV AS
6.4.8 DEKRA SE
6.4.9 TÜV NORD AG
6.4.10 UL Solutions Inc.
6.4.11 MISTRAS Group, Inc.
6.4.12 Baker Hughes Company
6.4.13 Evident Corporation
6.4.14 Eurofins Scientific SE
6.4.15 ALS Limited
6.4.16 Lloyd's Register Group Limited
6.4.17 QIMA Limited
6.4.18 Centre Testing International Group Co., Ltd.
6.4.19 China Certification and Inspection Group
6.4.20 Japan Quality Assurance Organization
7 Market Opportunities and Future Outlook
7.1 White-Space and Unmet-Need Assessment
7.1.1 Multi-Method Inspection Bundles for Asset Owners
7.1.2 Inspection Data Interoperability Across Multi-Vendor Assets
7.1.3 Certified Technician Capacity in India and Southeast Asia
7.1.4 Remote Inspection for Offshore, Mining, and Utility Assets
7.1.5 Inspection-as-a-Service for Small and Mid-Sized Industrial Operators
7.1.6 Digital Evidence and Cybersecure Compliance Records

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • SGS Société Générale de Surveillance SA
  • Bureau Veritas SA
  • Intertek Group plc
  • Applus Services SA
  • TÜV Rheinland AG
  • TÜV SÜD AG
  • DNV AS
  • DEKRA SE
  • TÜV NORD AG
  • UL Solutions Inc.
  • MISTRAS Group, Inc.
  • Baker Hughes Company
  • Evident Corporation
  • Eurofins Scientific SE
  • ALS Limited
  • Lloyd's Register Group Limited
  • QIMA Limited
  • Centre Testing International Group Co., Ltd.
  • China Certification and Inspection Group
  • Japan Quality Assurance Organization