Global Temporary Bonding Adhesive Market Trends and Insights
Advanced Packaging and Chiplet Integration
Chiplet architectures for AI accelerators are increasing demand in the temporary bonding adhesive market. Multi-die packages need wafer thinning below 50 µm across several device layers. Each thinning stage needs a bonding cycle with strict thermal, mechanical, and chemical requirements. Research presented at the IEEE Electronic Components and Technology Conference (ECTC) 2025 showed that infrared laser debonding on silicon temporary carriers supported 2.5D and 3D chiplet integration processes. The approach supports the use of adhesive chemistry and debonding methods as a combined process solution. Larger panel-level packaging formats also require uniform coating thickness because variation can affect subsequent lithography alignment.Wafer Thinning and Ultra-Thin Substrate Handling
Wafer thinning below 30 µm is becoming more common in fan-out packaging, high-bandwidth memory, and 3D integrated circuits. The adhesive must support the wafer during chemical mechanical polishing and withstand plasma or chemical processes. In December 2025, Brewer Science, Inc., EV Group (EVG), and Fraunhofer IZM-ASSID demonstrated handling of 300 mm wafers thinned to 15 µm with BrewerBOND C1301-10 and EVG880 LayerRelease technology. The system remained stable at temperatures up to 450 °C and enabled laser debonding. Research from the Yongjiang Laboratory also reported thinning of 12-inch silicon power wafers to 15 µm with total thickness variation at or below 2 µm. These requirements favor formulations with controlled rheology and consistent bonding-layer thickness.Specialty Material and Process Qualification Costs
Qualification of a new temporary bonding adhesive at a leading-edge fabrication facility requires extensive joint process testing. A material must show performance across bonding, thinning, downstream processing, and debonding before it can enter production. The qualification period can last 12 to 24 months, which limits the speed at which new formulations can gain volume. After approval, customers are reluctant to replace a material because changing suppliers can require another qualification cycle. This protects established suppliers but can slow the spread of new chemistry across the temporary bonding adhesive market. Smaller suppliers face the greatest challenge when they try to support several process nodes at the same time.Other drivers and restraints analyzed in the report include:
- Semiconductor Fab and Advanced Packaging Capacity Expansion
- MEMS, Image Sensor and Compound Semiconductor Growth
- Residue, Warpage and Yield-Failure Risk
Segment Analysis
Acrylic held 24.67% of the temporary bonding adhesive market share in 2026. It remained widely used in wafer-level packaging and fan-out processes with temperatures in the 200 °C to 250 °C range. Its cost profile and compatibility with established ultraviolet and thermal debonding equipment support broad adoption. Polyurethane is projected to expand at a 9.12% CAGR through 2032. The material provides mechanical flexibility, low residue after debonding, and suitable chemical resistance for fan-out applications.Silicone remains important where processing temperatures exceed 300 °C, including compound semiconductor and through-silicon via workflows. Epoxy formulations are used where stability during high-force grinding is more important than easy release. Laser-induced interfacial separation can reduce stress during debonding at lower energy density than ablative techniques. This supports the development of polyurethane and silicone grades designed for low-energy laser release. Wax-based and composite tape formats continue to serve cost-sensitive MEMS and power semiconductor applications. The temporary bonding adhesive market is separating into value-focused materials and performance-focused materials that emphasize thermal stability and residue control.
Organic polymer materials held 45.13% of the temporary bonding adhesive market share in 2026. Polyacrylates, thermoplastics, and polyurethane matrices are compatible with established spin-coating and ultraviolet curing processes. Their operating range supports many processes up to 200 °C to 250 °C. This installed equipment base supports their continued role in high-volume wafer-level packaging. Polyimide and related high-temperature materials are projected to advance at a 9.34% CAGR through 2032 as hybrid bonding, silver sintering, and plasma-enhanced chemical vapor deposition require higher thermal resistance.
Inorganic release-layer materials serve a smaller but growing role in silicon-carrier systems using infrared laser debonding. These deposited films can provide low thickness variation and high mechanical stability. The imec presented work at Electronics Components and Technology Conference (ECTC) 2025 on silicon-based temporary carrier systems for 2.5D and 3D integration. The shift toward silicon carriers can favor deposition and equipment specialists over suppliers focused only on coated organic materials. Composite and hybrid materials retain a role in flexible electronics and heterogeneous substrate applications. The temporary bonding adhesive industry is therefore likely to require both conventional coated materials and specialized release layers.
Complete Report Scope:
- By Product Type
- Acrylic
- Silicone
- Polyurethane
- Epoxy
- Other Product Types
- By Material Type
- Organic Polymer Materials
- Inorganic Release-Layer Materials
- Polyimide and Related High-Temperature Materials
- Other Material Types
- By Debonding Technology
- Thermal Slide-Off Debonding
- Mechanical Debonding
- Laser Debonding
- Other Debonding Technologies
- By Application
- Advanced Packaging
- MEMS
- CMOS Image Sensors
- Semiconductor Wafer Processing
- Other Applications
- By Geography
- Asia-Pacific
- China
- India
- Japan
- South Korea
- ASEAN Countries
- Rest of Asia-Pacific
- North America
- United States
- Canada
- Mexico
- Europe
- Germany
- United Kingdom
- France
- Italy
- NORDIC Countries
- Rest of Europe
- South America
- Brazil
- Argentina
- Rest of South America
- Middle East and Africa
- Saudi Arabia
- South Africa
- Rest of Middle East and Africa
- Asia-Pacific
Geography Analysis
Asia-Pacific held 51.41% of the temporary bonding adhesive market share in 2026 and is projected to advance at a 10.04% CAGR through 2032. Taiwan, South Korea, Japan, and China combine advanced fabrication, memory production, packaging capacity, and materials supply. Taiwan is central because TSMC operates leading CoWoS and SoIC capacity. Asia-Pacific, therefore, remains the main source of high-performance material qualification and demand. Japan also contributes through specialist electronic materials and image sensor supply chains.China is gaining importance as both a consumption market and a local materials supply base. Domestic developers are advancing organosilicon and other temporary bonding formulations for 8-inch and 12-inch wafer lines. This supports regional alternatives in cost-sensitive applications. TSMC’s USD 165 billion planned U.S. commitment includes its first U.S. advanced packaging facilities. Suppliers qualified on TSMC processes in Taiwan may have an advantage as these facilities progress.
U.S. emissions requirements can influence the selection of solvent-based materials. A September 2026 Federal Register action covered hazardous air pollutant standards for semiconductor manufacturing. This creates an incentive for lower-volatile-organic-compound formulations. Europe remains technically active through research institutions, including Fraunhofer IZM-ASSID, and through the European Semiconductor Manufacturing Company facility in Dresden. South America and the Middle East and Africa have limited direct demand because they have less wafer-level manufacturing infrastructure. Their semiconductor role remains more focused on downstream assembly and electronics production.
List of Companies Covered in this Report:
- 3M
- AI Technology, Inc.
- Arkema
- BASF
- Brewer Science, Inc.
- DAXIN Inc.
- Dow
- DuPont
- EV Group (EVG)
- H.B. Fuller Company
- Henkel AG and Co. KGaA
- JSR Corporation
- Micro Materials Inc.
- Nitto Denko Corporation
- Promerus, LLC
- Shin-Etsu Chemical Co., Ltd.
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- 3M
- AI Technology, Inc.
- Arkema
- BASF
- Brewer Science, Inc.
- DAXIN Inc.
- Dow
- DuPont
- EV Group (EVG)
- H.B. Fuller Company
- Henkel AG and Co. KGaA
- JSR Corporation
- Micro Materials Inc.
- Nitto Denko Corporation
- Promerus, LLC
- Shin-Etsu Chemical Co., Ltd.

