+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

South Korea Industrial Press Machines - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026-2031)

  • PDF Icon

    Report

  • 150 Pages
  • October 2026
  • Region: South Korea
  • Mordor Intelligence
  • ID: 6293008
The South Korea industrial press machines market size is expected to grow from USD 0.68 billion in 2025 to USD 0.73 billion in 2026 and is forecast to reach USD 0.99 billion by 2031 at 6.28% CAGR over 2026-2031. This report is Segmented by Drive Technology (Conventional Mechanical Presses, Hydraulic Presses, Pneumatic Presses, and More), by Press Force (Up To 100 Tons, 101-500 Tons, 501-1, 000 Tons, and More), by Application (Forging, Powder Compaction, and More), and by End-Use Industry (Aerospace & Defense, Electrical & Electronics, and More). The Market Forecasts are Provided in Terms of Value (USD).

South Korea Industrial Press Machines Market Trends and Insights

EV and Battery Manufacturing Capacity Expansion

Battery capacity investment is increasing demand for press equipment used for cell casings, module frames, and pack enclosures. LG Energy Solution, SK On, and Samsung SDI are expanding or upgrading production assets that require deep drawing, precision stamping, and related tooling. SK On is advancing Seosan Plant 3 toward 14 GWh of annual capacity by 2028, which supports demand for these forming operations. Each battery format requires a distinct die configuration so that plant upgrades can increase tooling needs beyond the effect of higher output alone. Hyundai Motor’s Ulsan EV-focused plant is operating and produces EV models with large battery systems, extending demand to direct OEM forming lines. Korean and Japanese producers continue to hold a leading position in global battery cell supply, keeping South Korea relevant to the supply of stamped battery hardware.

Demand for High-Strength and Lightweight Automotive Components

The weight of electric vehicle batteries is increasing the need for steel parts that provide strength with less material. Third-generation advanced high-strength steel has narrower forming limits and requires accurate control of tonnage, blank-holder force, and springback. Hyundai Steel began commercial production of third-generation advanced high-strength steel in early 2026, with 1.2 GPa tensile strength and a stated 10% body-in-white weight reduction. Conventional equipment installed during the 1990s and early 2000s may not provide the control needed for these grades. The South Korea industrial press machines market, therefore, benefits from a shift toward servo-mechanical and servo-hydraulic equipment. The Ministry of Trade, Industry, and Resources allocated KRW 382.7 billion (USD 265.6 million) to EV and hydrogen vehicle research and development across 44 new projects in 2026, reinforcing lightweighting requirements in vehicle supply chains.

High Tooling, Die, and Press-Line Capital Requirements

A complete automotive tandem stamping line requires presses, tooling, dies, coil-feed systems, transfer equipment, and in-line inspection. This full investment can cost tens of millions of USD, which limits self-funded purchases by smaller tier-1 and tier-2 suppliers. Presses are classified as hazardous machinery under Article 74 of the Enforcement Decree of the Occupational Safety and Health Act and require Korean Certification before commissioning. Certification can take three to six months, while biennial safety inspections add to ownership costs. A die set for third-generation advanced high-strength steel can exceed USD 1 million because it needs high-hardness inserts that address faster wear at 1.2 GPa tensile strength. These costs concentrate procurement within larger supply chains and limit the range of active buyers in the South Korea industrial press machines market.

Other drivers and restraints analyzed in the report include:
  • Replacement of Aging Press Equipment with Servo and Connected Systems
  • Expansion of Precision Stamping for Automotive Electronics and Battery Enclosures
  • Volatility in Automotive and General Machinery Capital Expenditure

Segment Analysis

Hydraulic presses held 32.5% of the South Korea industrial press machines market share in 2025. They are used for deep drawing, heavy forging, and compression molding in automotive and industrial machinery production. Their operating range spans 30 to 8,000 tons, supporting use across different workpiece sizes and materials. SIMPAC’s Incheon-area plants produce more than 1,200 units a year across mechanical, hydraulic, and servo configurations. This production base helps domestic suppliers serve standard and mid-capacity requirements. Mechanical presses continue to support high-speed blanking for appliance and electronics parts. Their cost per stroke remains attractive where part shapes are mature, and production volumes are stable. Pneumatic and hybrid systems serve lighter assembly and joining work in electronics and medical applications. This mix preserves hydraulic presses as the largest installed technology category in the South Korea industrial press machines market.

Servo-mechanical presses are projected to grow at an 8.2% CAGR from 2026 to 2031. Programmable slide motion supports battery-enclosure forming and EV motor-core lamination. These processes require repeatable motion profiles and close control during forming. The Korea Electrical and Electronic Technology Institute has identified the localization of CNC and servo-drive technology as a priority. More than 95% of these systems are sourced from Japan and Germany, which adds cost and lengthens lead times. Servo drives can recover deceleration energy that fixed-speed equipment releases as heat. This can lower electricity use per part by up to 30%, strengthening the purchase case for high-utilization lines. The growth of servo equipment raises the value of orders even where press unit sales do not rise at the same rate.

The 101-500 ton category held 33.1% of South Korea's industrial press machine market share in 2025. It is well-suited to automotive tier-1 suppliers making body members, door panels, and related structural parts. These suppliers need flexible equipment that can support recurring programs without the footprint of very large press lines. The up-to-100-ton category serves electronics, appliances, and medical precision stamping. These applications increasingly use compact servo-electric systems instead of older pneumatic equipment. The 501-1,000 ton and 1,001-2,000 ton ranges serve structural automotive work and general forging. Demand in these middle categories remains supported by established OEM supply chains. The segment structure reflects a large supplier base producing standard vehicle and industrial components.

The above 2,000-ton class is projected to grow at a 6.9% CAGR from 2026 to 2031. Large battery trays require high forming forces while maintaining panel flatness. Manufacturers are also replacing multi-piece welded assemblies with large stamped unibody parts. These changes increase demand for high-capacity equipment in automotive and battery applications. JNH Press developed an 8,000-ton forging press and exported 4,000 ton aluminum forging lines, indicating a domestic capability in heavy equipment. Hyundai Motor Group is investing KRW 36.2 trillion (USD 25.1 billion) in production-facility optimization from 2026 to 2030. This investment supports potential upgrades at Ulsan and Asan facilities. Heavy presses therefore have a smaller current base but a stronger growth profile than the overall South Korea industrial press machines market.

Complete Report Scope:

  • By Drive / Actuation Technology
    • Conventional Mechanical Presses
    • Servo-Mechanical Presses
    • Hydraulic Presses
    • Pneumatic Presses
    • Other and Hybrid Presses
  • By Press Force / Capacity
    • Up to 100 Tons
    • 101-500 Tons
    • 501-1,000 Tons
    • 1,001-2,000 Tons
    • Above 2,000 Tons
  • By Application / Process
    • Stamping, Blanking and Punching
    • Deep Drawing and Sheet Forming
    • Forging
    • Straightening and General Forming
    • Compression Molding
    • Powder Compaction
    • Assembly, Press-Fitting and Joining
    • Other Press Applications
  • By End-Use Industry
    • Automotive and Transportation
    • Aerospace and Defense
    • Industrial Machinery and Equipment
    • Electrical and Electronics
    • Appliances and Consumer Durables
    • Construction and Heavy Equipment
    • Energy and Power Equipment
    • Metal Products and General Manufacturing
    • Medical and Precision Manufacturing
    • Other End-Use Industries

List of Companies Covered in this Report:

  • SIMPAC INC.
  • JNH Press Co., Ltd.
  • Hyundai WIA Corporation
  • Korea Heavy Machinery Co., Ltd.
  • Kukil Precision Machinery Co., Ltd.
  • Sung Kwang Engineering and Manufacturing Co., Ltd.
  • HBE Press Co., Ltd.
  • Hejun Precision Technology Co., Ltd.
  • Ilshin Autotech Co., Ltd.
  • Sung San Machinery Co., Ltd.
  • AIDA Engineering, Ltd.
  • Komatsu Industries Corporation
  • Schuler AG
  • ANDRITZ AG
  • SEYI Machinery Co., Ltd.
  • Nidec-Shimpo Corporation
  • Yamada Dobby Co., Ltd.
  • Fagor Arrasate S. Coop.
  • AMADA CO., LTD.
  • Mitsubishi Heavy Industries, Ltd.
  • Yangli Group Corporation Ltd.
  • Stamtec, Inc.
  • ISGEC Heavy Engineering Ltd.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

Table of Contents

1 Introduction
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 Research Methodology3 Executive Summary
4 Market Landscape
4.1 Market Overview
4.2 Market Drivers
4.2.1 EV and Battery Manufacturing Capacity Expansion
4.2.2 Demand for High-Strength and Lightweight Automotive Components
4.2.3 Replacement of Aging Press Equipment with Servo and Connected Systems
4.2.4 Expansion of Precision Stamping for Automotive Electronics and Battery Enclosures
4.2.5 Growing Availability of Korean-Origin Press Controls and Automation Components
4.2.6 National Smart Factory Program for Press Equipment Digitalization
4.3 Market Restraints
4.3.1 High Tooling, Die, and Press-Line Capital Requirements
4.3.2 Volatility in Automotive and General Machinery Capital Expenditure
4.3.3 Limited Availability of Advanced Die-Design and Press-Commissioning Engineers
4.3.4 Dependence on Imported Servo Drives and Precision Hydraulic Controls
4.4 Value and Supply-Chain Analysis
4.4.1 Raw Materials and Fabricated Press Frames
4.4.2 Drives, Hydraulics, Motors, and Control Systems
4.4.3 Dies, Tooling, and Die-Change Systems
4.4.4 Press-Machine Manufacturers
4.4.5 Automation and System Integrators
4.4.6 Distributors and Authorized Dealers
4.4.7 Installation, Retrofit and Lifecycle Services
4.4.8 Heavy-Lift Logistics and Inland Transportation
4.5 Regulatory Landscape
4.5.1 Industrial Machinery Safety Requirements
4.5.2 Occupational Safety Requirements for Press Operations
4.5.3 Energy-Efficiency and Industrial Decarbonization Requirements
4.5.4 Automotive Safety and Lightweighting Standards
4.5.5 Import, Export, and Strategic Machinery Trade Controls
4.6 Technological Outlook
4.6.1 Mechanical, Hydraulic and Servo Press Architectures
4.6.2 Servo-Hydraulic and Servo-Electric Drives
4.6.3 Robotic Transfer, Coil-Feed Automation and In-Line Quality Control
4.6.4 IoT Monitoring, Predictive Maintenance and Digital Integration
4.6.5 AI-Assisted Process Optimization and Die Management
4.6.6 Energy-Efficient and Low-Consumption Press Systems
4.7 Impact of Geopolitical and Trade Developments
4.7.1 Tariffs on Imported Presses and Critical Components
4.7.2 Supply-Chain Disruptions for Motors, Controls, and Hydraulic Components
4.7.3 Domestic Capacity for Large-Scale Press Manufacturing
5 Market Size & Growth Forecasts
5.1 By Drive / Actuation Technology
5.1.1 Conventional Mechanical Presses
5.1.2 Servo-Mechanical Presses
5.1.3 Hydraulic Presses
5.1.4 Pneumatic Presses
5.1.5 Other and Hybrid Presses
5.2 By Press Force / Capacity
5.2.1 Up to 100 Tons
5.2.2 101-500 Tons
5.2.3 501-1,000 Tons
5.2.4 1,001-2,000 Tons
5.2.5 Above 2,000 Tons
5.3 By Application / Process
5.3.1 Stamping, Blanking and Punching
5.3.2 Deep Drawing and Sheet Forming
5.3.3 Forging
5.3.4 Straightening and General Forming
5.3.5 Compression Molding
5.3.6 Powder Compaction
5.3.7 Assembly, Press-Fitting and Joining
5.3.8 Other Press Applications
5.4 By End-Use Industry
5.4.1 Automotive and Transportation
5.4.2 Aerospace and Defense
5.4.3 Industrial Machinery and Equipment
5.4.4 Electrical and Electronics
5.4.5 Appliances and Consumer Durables
5.4.6 Construction and Heavy Equipment
5.4.7 Energy and Power Equipment
5.4.8 Metal Products and General Manufacturing
5.4.9 Medical and Precision Manufacturing
5.4.10 Other End-Use Industries
6 Competitive Landscape
6.1 Market Concentration
6.2 Strategic Moves
6.3 Market Share Analysis
6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Segments, Financials as available, Strategic Information, Products and Services, Recent Developments)
6.4.1 SIMPAC INC.
6.4.2 JNH Press Co., Ltd.
6.4.3 Hyundai WIA Corporation
6.4.4 Korea Heavy Machinery Co., Ltd.
6.4.5 Kukil Precision Machinery Co., Ltd.
6.4.6 Sung Kwang Engineering and Manufacturing Co., Ltd.
6.4.7 HBE Press Co., Ltd.
6.4.8 Hejun Precision Technology Co., Ltd.
6.4.9 Ilshin Autotech Co., Ltd.
6.4.10 Sung San Machinery Co., Ltd.
6.4.11 AIDA Engineering, Ltd.
6.4.12 Komatsu Industries Corporation
6.4.13 Schuler AG
6.4.14 ANDRITZ AG
6.4.15 SEYI Machinery Co., Ltd.
6.4.16 Nidec-Shimpo Corporation
6.4.17 Yamada Dobby Co., Ltd.
6.4.18 Fagor Arrasate S. Coop.
6.4.19 AMADA CO., LTD.
6.4.20 Mitsubishi Heavy Industries, Ltd.
6.4.21 Yangli Group Corporation Ltd.
6.4.22 Stamtec, Inc.
6.4.23 ISGEC Heavy Engineering Ltd.
7 Market Opportunities and Future Outlook
7.1 White-Space and Unmet-Need Assessment
7.1.1 Mid-Capacity Servo Presses for Korean SMEs
7.1.2 Battery-Enclosure Press Lines with Integrated Inspection
7.1.3 Retrofit Kits for Aging Mechanical Presses
7.1.4 Low-Carbon Press-Line Solutions
7.1.5 Localized Predictive-Maintenance and Die-Monitoring Software

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • SIMPAC INC.
  • JNH Press Co., Ltd.
  • Hyundai WIA Corporation
  • Korea Heavy Machinery Co., Ltd.
  • Kukil Precision Machinery Co., Ltd.
  • Sung Kwang Engineering and Manufacturing Co., Ltd.
  • HBE Press Co., Ltd.
  • Hejun Precision Technology Co., Ltd.
  • Ilshin Autotech Co., Ltd.
  • Sung San Machinery Co., Ltd.
  • AIDA Engineering, Ltd.
  • Komatsu Industries Corporation
  • Schuler AG
  • ANDRITZ AG
  • SEYI Machinery Co., Ltd.
  • Nidec-Shimpo Corporation
  • Yamada Dobby Co., Ltd.
  • Fagor Arrasate S. Coop.
  • AMADA CO., LTD.
  • Mitsubishi Heavy Industries, Ltd.
  • Yangli Group Corporation Ltd.
  • Stamtec, Inc.
  • ISGEC Heavy Engineering Ltd.