The future of the global commercial aerospace landing gear market looks promising with opportunities in the main landing gear and nose landing gear markets.
- Within the aircraft type category, commercial aircrafts will remain the largest segment over the forecast period as the rising air passenger traffic boosting fleet expansion.
- Within the gear type category, main landing gear will remain the largest segment due to the growing aircraft maintenance activities supporting landing gear replacements.
- In terms of regions, North America will remain the largest region over the forecast period due to the rising demand for lightweight automotive materials.
Emerging Trends in Commercial Aerospace Landing Gear Market
The commercial aerospace landing gear market is shifting from component-based programs to integrated, whole-life, platform-based programs involving OEMs, MROs and Lessors. In the 2025-2027 period, increasing airframe outsourcing, increased use and scrutiny of costs is expected to compress lead-times and create an environment for new qualification and service models.- Sustainability and Lightweighting: In the 2025-2027 period, OEMs and MROs further reduce life-cycle carbon targets which causes titanium and aluminum-lithium contents to be reduced along with the use of lower-wear coatings, (EU Aviation net-zero roadmaps for 2030, September 2026). This affects landing gear design because every kilogram of weight removed affects fuel burn and maintenance planning over 3-5 years.
- Digitally Enabled Inspection and Traceability: From 2025-2027, digital component records will be mandated in service bulletins along with inspections aided by sensors (January 2025, major MRO networks roll-out of predictive maintenance data standards). Faults caused by landing gear will be tracked digitally, thereby minimizing AOG events.
- Modularization and Faster Turn Services: Modular Actuators and major assemblies are designed to be changed quickly in-line with airline turn-around times (August 2025, OEMs focus on lowering turn-around time). Interchangeable assemblies will be in high demand to shorten qualification time.
- Manufacturing and Repair: Additive machining and advanced machining continue to gain traction within the landing gear supply chains to decrease rework and reduce variation in part tolerances; 2025-2027 adoptions of in-line metrology and closed-loop machining for critical bores in aerospace platforms (Mar. 2026) are expected to reduce scrap rates by 20%. Over the next 3-5 years, trends toward lower unit cost and faster repair times will impact sourcing decisions.
- Regional Supply Chain Diversification: Suppliers expand their regional machining and coatings capacities to hedge against supply chain risks; 2025-2027 procurement focuses on dual-sourcing and local-region repair lanes (Nov. 2025) as a response to post-COVID-19 supply chain disruptions and increased market volatility. This favors lessors by making more inventory available and reduces dependence on single country/region bottlenecks.
Recent Developments in the Commercial Aerospace Landing Gear Market
The commercial aerospace landing gear market is forecast to continue its growth through 2025 to 2027. Lucintel expects sustained ordering and the capacity of the aftermarket to continue its growth through 2025 to 2027.- Sustainment Contracts: Repair and overhaul contracts for landing gear continue to drive growth for the aftermarket. The booking of landing gear overhauls and expanded C-checks in March 2026 created an increase in demand for parts and shift suppliers to a higher call rate.
- Expansions for Cast and Machined Components: A tier 1 airframe supplier broke ground on a new forging line and an additional 18,000 m2 of production space in August 2025 for landing gear production. Improved output and lead time for the supplier reduces lead times for building landings gear for OEMs and provides spares, thereby increasing availability.
- Support for Next Generation Narrowbody Programs: Framework agreements awarded in June 2026 to suppliers covered shop visits for 240,000 landing gear components aligned to ramp up of next generation of narrowbody programs. Improved component traceability and durability data helped suppliers differentiate procurement for 3 to 5 years.
- Approval for Lightweight Redesigns: Regulatory agencies approved updated design allowable for composite-lined and Ti-optimized subassemblies in January 2027, which cleared 41 variant drawings. Faster approvals shorten design-to-production cycles, prompting airframers to specify more lightweight gear architectures.
- MRO Network Partnerships and QA Systems: In October 2025, a global MRO alliance signed a 5-year QA and tooling agreement for 12 partner locations. This reduces repair risks, improves supply of serialized parts, and aligns MRO to meet OEM requirements.
Strategic Growth Opportunities in the Commercial Aerospace Landing Gear Market
From 2024 to 2026, expectations are for cost per seat-mile, carbon emissions, and dispatch reliability to improve, while turnaround time to decrease. Digital maintenance ecosystems and materials qualification cycles also advance. Lucintel expects these trends to create new landing gear revenue opportunities.- Additively Manufactured Landing Gear Components: Qualification of metal Additive Manufacturing (AM) supply chains moves from prototype to repeatable builds. In May 2026, Safran reported 1,000+ uses of AM landing gear parts through its repair network. Between 2024 and 2026, airlines purchase less scrap landing gear and shorten shop visits. Repeated builds and repairs displace new production and rework, generating new revenue streams.
- Predictive Landing Gear Overhaul and PBTH Contracts: Sensor-based health monitoring leads to predictive packages and arrangements. In February 2025, United Airlines announced fleet-wide sensors led to landing gear inspection savings of 12 months. By 2028, outcome-based pricing enables OEMs and MROs to control recurring revenue.
- Composite and Hybrid Landing Gear Structures: Reduced weight, improved range and payload, and better economics drive the adoption of high-premium landing gear. In September 2026, the EASA issued an update establishing new Aging Tests for Hybrid Landing Gear Structures.
- Digital Design of Aircraft Variants: An increasing trend is the production of variant airframes with digitally designed landing gear. In April 2025, Boeing announced an average of 8 months to digitally design and certify changes to airframes. Higher throughput and demand drive airframe retrofit and engineering service revenue.
- Aftermarket Friction, Braking and Landing-system Consumables Bundles: Operators have continued to invest in predictable braking performance and dust management. In July 2025, airlines reported a 15% reduction in unscheduled braking events since the implementation of bundled consumables and training. While on-aircraft systems management remains a major driver for bundling, it also raises aftermarket average revenue per unit (ARPU). We expect this trend to continue as airlines aim to mitigate utilization peaks.
Commercial Aerospace Landing Gear Market Drivers and Challenges
The commercial aerospace landing gear market has been affected by advancements in technology and shifts in production methods. The US FAA and the EASA have increasing safety requirements for flight operations and the maintenance of aircraft. Increased economic growth and pressures on the airline industry are key drivers in the replacement of the aircraft fleet. Lucintel stated that these key market elements have and will continue to affect landing gear design, the way landing gear is purchased and the aftermarket landing gear support.The factors responsible for driving this market include:
- Customer Demand: There has been a demand for aircraft with only a single aisle, as well as regional aircraft. This has resulted in a rise in the production of new landing gear and an increase in the long term spare landing gear. In May 2026, major OEM order backlogs for narrowbody jets reached about 4,000 aircraft. This demand has meant that landing gear programs will continue at a high rate, supplier capacity will be sustained, aftermarket parts will continue to be sold, and design upgrades will be made to landing gear to meet operating cost and reliability goals over the next 5 years.
- Technology Improvements: Continuous updates in material science and use of advanced materials have reduced the weight of landing gear while increasing its durability. In September 2025, an industry test on health-monitoring landing gear systems reported that wear signatures were detected, enabling early maintenance actions, and the system was scaled across multiple fleets. Continuous design upgrades and use of new materials to manufacture landing gear will help sustain this market through 2028.
- Regulatory Support: Requirements related to safety-focused airworthiness, inspection, and continued airworthiness programs drive a need for more traceable designs, more complete documentation, and more explicit instructions for maintenance by the aircraft manufacturer. Example: In (January 2027), the regulatory authorities mandated (or guided) more frequent standardized inspections of critical landing gear elements. In the next 3 to 5 years, this kind of regulatory activity will drive the redesign and/or certification of new models, and of aftermarket tooling, and will increase the demand for landing gear components that conform to the regulated requirements.
- Manufacturing Efficiency: Improved forging and machining, digital engineering and more reliable quality systems enable cost reduction and lead time improvement for landing gear assemblies. Example: In (June 2026) several large aerospace suppliers increased their use of additive or hybrid manufacturing, targeting about a 20% reduction in the time required for a part to go from a prototype to a test article. Continued investment in these capabilities by suppliers should help reduce lead times and improve flexibility to respond to variances in customer demand and help the market absorb demand shocks while maintaining safety margins through 2028 to 2031.
The challenges facing this market include:
- Certification and Qualification Complexity: Modifications to existing landing gear designs require extensive analysis and testing to validate airworthiness and increase schedule risk and Non-recurring engineering costs. An example: in (April 2026) a typical gear qualification program required numerous qualification loops and thousands of pages of revised maintenance documentation to be accepted. This will increase the cost of smaller suppliers and shift their focus to incremental improvements rather than large technology leaps, over the next 3 to 5 years. It will also slow the introduction of new sensors and materials, and increase the cost of larger suppliers.
- Constraints in Supply Chains of Critical Materials and Machining: Critical elements of landing gear such as forged titanium and high strength alloys, bearings and precision machining increase cost and limit output. Constraints in forging slots and long lead times of raw materials and machining will increase working capital and inventory of suppliers in the next 3 to 5 years. These will also increase the diversification of qualification pathways of Tier suppliers and OEMs.
- Sustainability Pressures: Airlines and lessors are focusing on lifecycle emissions and the sustainability of their fleets. The aim is to enhance energy efficiency and minimize waste during maintenance and overhaul. An example is the (February 2027) industry sustainability reporting focus on lifecycle metrics, which resulted in the redesign of repair and recycling paths. The needs of our customers will drive investment in coatings and processes to recover and re-manufacture materials, increasing short-term costs and creating medium-term opportunities to produce components with circularity over the next 8 to 10 years.
List of Commercial Aerospace Landing Gear Market Companies
Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies commercial aerospace landing gear market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base.Some of the commercial aerospace landing gear market companies profiled in this report include:
- Safran Landing Systems
- Liebherr-Aerospace
- Heroux-Devote
- Magellan Aerospace
- CIRCOR Aerospace
Commercial Aerospace Landing Gear Market by Segment
The study includes a forecast for the global commercial aerospace landing gear market by aircraft type, gear type, and region.Aircraft Type [Value ($B) from 2019 to 2035]:
- Commercial Aircrafts
- Regional Aircrafts
- Business Jets
Gear Type [Value ($B) from 2019 to 2035]:
- Main Landing Gear
- Nose Landing Gear
Region [Value ($B) from 2019 to 2035]:
- North America
- Europe
- Asia Pacific
- The Rest of the World
Country Wise Outlook for the Commercial Aerospace Landing Gear Market
Improving commercial aircraft delivery schedules and renewed government interest in industrial capacity have altered the supply chains of landing gears. Trade frictions and the emphasis on domestic resilience have increased the focus on aerospace components. According to Lucintel’s latest market study, the rebalancing of capacity by tier-one suppliers remains the core of strategic planning.- United States: RTX (Collins Aerospace) continued to expand landing-gear and actuation-related manufacturing capacity at its U.S. sites. In May 2024, the company announced the commissioning of additional capacity to support its current commercial programs. In the 2024-2028 timeframe, enhanced U.S. production should lessen the risk of long lead times for landing-gear subsystems for new-delivery commercial aircraft.
- China: The commercial program build rate for the COMAC C919 continued to speed up China’s domestic qualification and supply of landing gear, and in April 2024, state-linked suppliers in China disclosed upgrading their narrowbody assembly and machining lines to support increased delivery rates. Faster repeatable performance on volume machining and assembly of integrated landing gear for airframes increases the likelihood of compliance to new airframe integrations and modifications.
- Germany: Strong partnerships and investments by German suppliers and Liebherr around airframe systems continued to dominate Germany’s aerospace industrial policy. In September 2023, Liebherr announced additional investment in its landing-gear production systems in Germany. This continues strong, short-term production for landing gear and improves sourcing reliability for OEM delivery ramp ups for the next several years.
- India: Continued focus on deeper aerospace localization and the Indian government’s procurement and industrial partnership policies improved capabilities of India’s component suppliers. In February 2024, one of the top aerospace component manufacturers in India announced new production systems to enhance its capacity to meet the delivery rates for commercial aircraft. Improved in-country capacities and component supplies should improve delivery rates for new programs.
- Japan: Continued focus by the Japanese government on improving Japan’s aerospace industry modernization and landing gear component readiness positively impacted suppliers. In June 2024, a Japanese supplier announced an improvement and modernization of its production line to enhance and improve consistency of machining and assembly for commercial aircraft components. Improved integration should reduce integration lead times for the next 3-5 years.
Features of the Global Commercial Aerospace Landing Gear Market
- Market Size Estimates: commercial aerospace landing gear market size estimation in terms of value ($B).
- Trend and Forecast Analysis: Market trends (2019 to 2026) and forecast (2027 to 2035) by various segments and regions.
- Segmentation Analysis: commercial aerospace landing gear market size by various segments, such as by aircraft type, gear type and region in terms of value ($B).
- Regional Analysis: commercial aerospace landing gear market breakdown by North America, Europe, Asia Pacific, and the Rest of the World.
- Growth Opportunities: Analysis of growth opportunities in different aircraft type, gear type and regions for the commercial aerospace landing gear market.
- Strategic Analysis: This includes M&A, new product development, and competitive landscape of the commercial aerospace landing gear market.- Analysis of competitive intensity of the industry based on Porter's Five Forces model.
This report answers the following 11 key questions:
Q.1. What are some of the most promising, high-growth opportunities for the commercial aerospace landing gear market by aircraft type (commercial aircrafts, regional aircrafts, and business jets), gear type (main landing gear and nose landing gear), and region (North America, Europe, Asia Pacific, and the Rest of the World)?Q.2. Which segments will grow at a faster pace and why?
Q.3. Which region will grow at a faster pace and why?
Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
Q.5. What are the business risks and competitive threats in this market?
Q.6. What are the emerging trends in this market and the reasons behind them?
Q.7. What are some of the changing demands of customers in the market?
Q.8. What are the new developments in the market? Which companies are leading these developments?
Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
Q.11. What M&A activity has occurred in the last 9 years, and what has its impact been on the industry?
This product will be delivered within 1-3 business days.
Table of Contents
Companies Mentioned
- Safran Landing Systems
- Liebherr-Aerospace
- Heroux-Devote
- Magellan Aerospace
- CIRCOR Aerospace
Methodology
The analyst has been in the business of market research and management consulting since 2000 and has published over 600 market intelligence reports in various markets/applications and served over 1,000 clients worldwide. Each study is a culmination of four months of full-time effort performed by the analyst team. The analysts used the following sources for the creation and completion of this valuable report:
- In-depth interviews of the major players in the market
- Detailed secondary research from competitors’ financial statements and published data
- Extensive searches of published works, market, and database information pertaining to industry news, company press releases, and customer intentions
- A compilation of the experiences, judgments, and insights of professionals, who have analyzed and tracked the market over the years.
Extensive research and interviews are conducted in the supply chain of the market to estimate market share, market size, trends, drivers, challenges and forecasts.
Thus, the analyst compiles vast amounts of data from numerous sources, validates the integrity of that data, and performs a comprehensive analysis. The analyst then organizes the data, its findings, and insights into a concise report designed to support the strategic decision-making process.

LOADING...

